929 questions
Error 0xc1900101
Dear Sir/Madame,
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
mise à jour logiciel
Bonjour,
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Error Message
After running Bootspeed for the first time in a long time, I get the error message, "The operating system is not presently configured to run this application." It affects my Bluetooth, plus it is annoying to have the error message popup on my screen every five minutes. Do you recommend that I go to "Restore Points"? I have an early February date available.
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Can't scan disk space
I've been using BoostSpeed successfully on Windows 7 for many years. It hasn't been working for the last 2 months. When it scans the disk space, it gets stuck on a temporary Skype file, and stops scanning. To fix this, I have to re-start my computer, and re-install BoostSpeed 12. My computer has been running painfully slow for the last 2 months. PLEASE HELP!
ESENT Help.
svchost (3804, R, 98) SRUJet: New log file cannot be created because the database cannot write to the log drive. The drive may be read-only, out of free disk space, misconfigured, or corrupt. Error -1032.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Eliminar una partición creada por Windows
Mi laptop HP tiene una memoria de 120GB. De los cuales hay una partición llamada HP_RECOVERY (G) que ocupa 21GB.
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Right Click Menu
Hello, My question is this: From time to time when I right mouse button click on a file on the desktop or in a folder the computer just freezes with the little blue circle turning for like 20-30 seconds before the right click menu will pop up, it does not do it all the time and seems random and there does not seem to be a reason for this, I have followed all the tutorials online that I could find and that is even why I purchased your software but nothing seems to solve this annoying issue, hopefully you can help. I am also attaching a screen shot to my computer spec details
windows photo viewer suddenly missing
since years I'm using Windows Photo Viewer to see my pictures (jpg and others)
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Windows freezes frequently
I cannot seem to resolve the freezing problem. sometimes it freezes after a very short time after start-up and occassionally it works for quite sometime before it freezes again.
Do you have any suggestios what I can do to stop this or how I can find what may be causing this.
I am not a technical person so any answer have to be spoon-fed.
Thanks
Host Services for Windows Processes
Does Boost speed address excessive memory use by Host Services f or Windows Processes? This app is continually hogging 1/3 of my PC memory.
reparer windows 10
MON WINDOWS 10 NE FONCTIONNE PAS BIEN PAR DE BARRE DES TACHES NI L EXPLORATEUR DE WINDOWS
mot de passe bios perdu
j'ai un pc hp compaq 6730s sous N°=CNU9020NKN
mon mot de passe par defaut (e9lo1719s9) n'a pas d'effet
j'ai change la pile bios rien
j'ai utilise hiren's bootcd rien
Aider mois s.v.p et merci d'avance................
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
once power button pressed to start up...
...my PC makes three long, low tones followed by four shorter, higher tones. Plus it is very slow to start.
Any help gratefully received
Thank you
Tom
Any help gratefully received
Thank you
Tom
location
hi, i did the normal cleaning and the location services are disabled and i can't fix it right now. what should i do?
Add Folder (PIN) to Quick Access Not Working
I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".
When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter
cleanup of the registry
how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program
Проблема
Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.
IRQL NOT LESS OR EQUAL - PANTALLA AZUL AL PRENDER LAPTOP
BUENOS DIAS
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:
- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys
ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO
System Events Notification Service
I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.
So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.
sCAN wINDOWS INSTALLATION ON OTHER dISK
I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:
How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?
And can you reference me too the steps to be able to recover my PC please