Cannot connect Wifi.无法连接无线网
Hello, I used Auslogics BoostSpeed 13 to clean up the data. After cleaning, my DELL notebook (DELL 5520) could not connect to the wireless network. I could not connect to the network by using the external network card or the external network cable. How should I solve it? Looking forward to your reply, you can also reply me at 1574426325@qq.com
您好，我用Auslogics BoostSpeed 13进行了数据清理，清理之后，我的戴尔笔记本(DELL 5520)无法连接无线网，使用外置网卡、外接网线都无法连接网络。请问应该如何解决？期待您的回复，您也可以回复我的邮箱：
The Wireless Network Adapter cuts out
What is messing with the WNA? No other device in my house using the wifi has this problem. Only my laptop I am using now.
Thanks...Shane Ostrom
После обновления сетевого драйвера пропадает сетевое подключение
DNS SERVER NOT WORKING
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
блютуз гарнитура HONOR AM-61
Ipv4 and Ipv6 not connected
Проблема с интернетом
WIFI droping
Microsoft Teredo Tunneling adapter not working
slow internet
ps - just checked off the realtek as I have no idea where the problem is
WiFi keeps disconnecting
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
registrazione su un terzo compiuter
Attualmente ne ho solo due e non riesco a collegarmi al terzo che non è mio ma di un mio collaboratore
I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
Microsoft Teredo Tunneling adapter not working
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
WiFi keeps disconnecting
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
блютуз гарнитура HONOR AM-61
Ipv4 and Ipv6 not connected
slow internet
ps - just checked off the realtek as I have no idea where the problem is
Проблема с интернетом
DNS SERVER NOT WORKING
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
i got few problems with nmy network can u help please
how are you
i need help please
i have like a lot of issues with my network ( dns - dhcp - ,,,,, etc ) a lot of them
thanks ^^
WIFI droping
После обновления сетевого драйвера пропадает сетевое подключение
Cannot connect Wifi.无法连接无线网
Hello, I used Auslogics BoostSpeed 13 to clean up the data. After cleaning, my DELL notebook (DELL 5520) could not connect to the wireless network. I could not connect to the network by using the external network card or the external network cable. How should I solve it? Looking forward to your reply, you can also reply me at 1574426325@qq.com
您好，我用Auslogics BoostSpeed 13进行了数据清理，清理之后，我的戴尔笔记本(DELL 5520)无法连接无线网，使用外置网卡、外接网线都无法连接网络。请问应该如何解决？期待您的回复，您也可以回复我的邮箱：
The Wireless Network Adapter cuts out
What is messing with the WNA? No other device in my house using the wifi has this problem. Only my laptop I am using now.
Thanks...Shane Ostrom
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb