Location Service
I want to turn on Location services so that my display automatically dims and cuts out blue light when the sun sets. However when I go to 'Night Light Settings' and then under 'Schedule' access 'Location Settings' I am informed that "Some of these settings are hidden or managed by your organisation" and the 'Change' button is disabled.
What Organisation? This is my personal desktop not managed by anyone but me.
Pleas could you help with this issue.
Thanks
Jeff
Missing Bluetooth
Unable to download anything from Microsoft Store
I get the following error code whenever I try to download anything from the Microsoft store.
Code: 0x800706D9
How can I fix this so I can download apps from the store?
Thank you
How to remove 0 data files
Is it possible to find all files with 0 kb and deleted them?
I have many mp4 and mp3 files that have ZERO data all over in different folders and drives.
Thank you
Обновление Windows (системы безопасности) появляется синий экран
При загрузке и установки обновлений виндовз (Windows Update) появляется синий экран смерти. Я вынужден отключить Windows Update и уже больше двух месяцев не выключаю ноутбук (не перезагружаю).
Как установить обновления что б не было экрана смерти?
Duda
He escuchado y leído buena reseñas de ustedes, por eso instalé el programa, sin embargo, en un foro de tecnología, leí que Microsoft, no recomendaba instalar optimizadores, pues podrían dañar el sistema Windows.
¿Qué tan cierto es esto?
Feliz año 2021.
not fixed
Windows 10 Reliability Monitor issue.
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
UsoClient
Hello Auslogics
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
Phil Parkin
Location in Privacy setting
Thank You
BoostSpeed 12 clobbers Voice Recognition.
I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.
Thank you
Unmount drives
Thanks for your well appreciated help.
HDD Spindown Automatically
Microsoft Storeが 無くなってしまいました。
BoostSpeed11を インストール後 設定 操作してみた所 Storが グレー表示になり アクセス出来なくなりました。
レスキュ-から 回復を試みましたが 復旧出来ない状態です。
issue while booting
When I turn on my pc,
after windows logo a blank screen comes for about 3-4 min.
then a "please wait" loop comes which lasts for about 1 min.
My PC: It's a prebuilt "ACER Veriton series."
Want the operating system files checked and to be fully operational.
Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.
Thanks, L8R
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Unwanted sound
Update
windows update slows startups
Windows 10 Update Error Code 0x80070bc9
Do you have a tool to address this and repair Windows Update software or whatever is wrong?
My system repair data
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
pc unplugged ac adapter pc shuts down with battery charged at high percentage
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
cannot open links in OUTLOOK
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
My Windows 10 Pro version asks for activation
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
I would like to cleanup my windows pc
Stop code issues
My unit keeps crashing and indicating stop code: IRQL_NOT_LESS_OR_EQUAL. I have tried every thing I know with no success.
Please help.
Thanking you in advance,
Coach Rod