910 questions
Delete wrong user
After boot. Windows ask for user. To choise of two with same name en than pin code.
Want to delete wrong choise
Want to delete wrong choise
Unable to activate Auslogics Bootspeed 12 PRO Version
I have been having issues now for more than a week I keep getting the message the my PRO Version is not atctivated despite me doing it countless times. Please can you advise what to do.
Windows refusing access as administrator
Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy
Program not registered
As you can see in the attached show is registred, but the program says need to rgister for pro version. Please advise as I have renewed the license in december.
Thank you
Thank you
Aktivation not Possibel
Hi
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
I did try to activate the pro version.
Reslult: The product has been activated
But in realatiy is the green botten still here and its not working as should when activated.
Regards
Kurt
Auslogics 12 is blocked by Windows 10
Hi!
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
My Auslogics 12 is blocked by Windows 10. What can I do to fix this problem? And I cannot to set my Auslogics license key. I have just a basic version of programm now.
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
Не активируется программа при наличии лицензионного ключа
Добрый день! Образовались проблемы с Вашей программой: не активируется про версия (у меня есть подписка и лицензионный ключ), не запускается программа отдель после закрытия ( пишет: "Администратор заблокировал доступ к этому приложению". Очень странно, ведь я этого не делал)) и подтормаживания и общие сбои в работе приложения, хотя система весьма мощная и не хватку мощности можно смело исключить. Как быть? Что делать?
Cannot open Auslogics 12 on my other laptop
Hi, this may have come through twice, sorry if it has, but I have 3 laptops which I pay to use your excellent software. My other laptop, a Lenovo T520 is showing an error message from MS ...the adminsitrator has blocked me from running the auslogics app. It then says contact the adminsitrator...I am the adminsitrator ..the only user of that machine. Does MS have a problem with Auslogics? Can you help me sort this problem out and enable me to open your software as and wehen I need to...weekly? VMT Chris
settings
ihave bought boostspeed pro it seems to be gone . i have only the normal boostspeed. how this is possible you tell me.
the program have trouble with intel smart sound and some issue with outlook, background taskhost exe an wtlibrary exe.
the program have trouble with intel smart sound and some issue with outlook, background taskhost exe an wtlibrary exe.
проблема со входом в браузеры
Здраствуйте мне очень нужна Ваша помощь, у меня не отрывает страницы ни один браузер .Интернет есть , есть гугл , есть опера . но не открывает . не работают ссылки . Иными словами даже не появляются окна после нажатия ярлыка картинки на которые клацаещь а толку нет. Интернет есть показывает статус что все работает , ошибок не находит программа сканирования ... Помогите пожалуста
Активация PRO
почему при вводе ключа регистрации программа не активируется до версии PRO, хотя на сайте пишет, что ключ верный и программа зарегестрирована и так на всех устройствах
Boost Speed 12
Hi Guys
Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..
Tom
Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..
Tom
Windows Blickpunkt-Bilder
Nach BoosSpeed12 wechseln die Windows 10 Blickpunkt-Bilder nicht mehr und muß von mir manuell repariert werden. Welche Einstellungen können das verhindern?
System Protection Blocking the BootSpeed.
Windows 10 is blocking BootSpeed when I want to open aplikation. (runs in background). This is famous request of asking a administratotor. It strated few days ago. I tryed opening as adminstartor and switched off Defender. I am rauning bootspeed 12. It is the same on 2 komputers different brand.
Boost speed does not recognise pro
I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Windows Update, something went wrong
My sytem is no longer doing its windows updates, it always displays an error saying " something went wrong Try to reopen settings later"
Analyse pour ajustements Windows
Bonjour,
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
right mouse click
i have big problem when i click with right mouse button it loads forever. i cleaned registry already few times but it didnt help. and i am helples dont want to reinstal whole system ...
Windows 11
I've upgraded to Windows 11. Are there any issues using BoostSpeed with Win11 that I should be aware of?
Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
Auslogics BoostSpeed 13のアップデート
Auslogics BoostSpeed 13のアップデート案内は来るのですが
Auslogics BoostSpeed 13.0.0.5及び
Auslogics BoostSpeed 13.0.0.6まアップデートは
案内通り実行しても、何回も実行してもアップデート出来ません
対処方法は有るのでしょうか・・・・・
Auslogics BoostSpeed 13.0.0.5及び
Auslogics BoostSpeed 13.0.0.6まアップデートは
案内通り実行しても、何回も実行してもアップデート出来ません
対処方法は有るのでしょうか・・・・・
no moving
hi,
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
I would like to move files (pictures) from an internal SSD to an external HDD. It is not possible: I receve error code 0x80070079.
I have Win 10 on my laptop and everything seems working properly so far.
thank you,
Istvan
Defragmentierung einer virtuellen Festplatte
Kann man virtuelle Festplatten mit Eurem System Defragmentieren. Zum Beispiel über eine erweiterte Auswahl.
LOST APPS
I got myself in a bind and I resorted to installing a backup file.
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
Unfortunately I overlokked the advice that apps would be lost.
I now have a list of about 60 apps listed as "Apps removed while resetting your PC", including Auslogics programs.
Is ther any way that I can recover those apps?
I'm using Windows 10.
Cheers
Bill Wacher
защита
при работе с функцией "защитить" выходит сообщение о сбое работы программы. Кнопка "защита" не устанавливается и не фиксируется на верхней строке .
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
по рекомендащиям программы ,антивирус виндос недаёт внести программу в опцию разрешоных.Функция "защита" неработает должным образом.раннее хорошо работала!
cant update due to virtual box
hi
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
i cant update my windows due to virtual box install
i have uninstall thw virtual box already but still cany install
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
transfert photos depuis icloud
hi
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
depuis ce matin quand je telecharge mes photos depuis icloud elles sont dans un format different
extension heic
et je n'arrive plus a les lire
please i want to have a french answer ty
Boostspeed Benachrichtigungsanzeigen
Hallo wertes Auslogics-Boostspeed-Team,
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
ich möchte gerne nach jedem Starten oder Neustarten meines PCs (Win10 Enterprise LTSC) angezeigt bekommen, wie lange das Starten dauerte. Diese Benachrichtigung wird mir bisher nur manchmal angezeigt oder wenn ich Boostspeed nach dem Hochfahren selbst starte; aber auch dann dauert es eine Weile, bis die Benachrifhtigung erscheint und auch hier erscheint sie nur manchmal.
Zudem möchte ich bitte gerne wissen, welche Taskscheduler und Hintergrundaufgaben von Microsoft Corporation ich im Auslogics Boostspeed Startup Manager deaktivieren kann, sodass das Windows dennoch fehlerfrei läuft; habt ihr hierfür eine "Pauschale"?
Vielen Dank vorab für eure Mithilfe.
Freundlichst, Wayseer
not fixed or empty registry keys
Registety Cleaner 9 finds missing keys and missing files that do nor exist when I try to locate them in regedit?
HDD 100% in Task Manager
Здравствуйте.
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
У меня проблема с работоспособностью компьютера.
Загруженность диска 100% в диспетчере задач.
Обновлял драйвера черед Ваш Driver Updater, после чего компьютер стал дольше выполнять задачи.
Выполнил восстановление.
Запустил BoostSpeed13.
Вроде бы получилось настроить, и когда компьютер простаивает, то значения не поднимаются до 100%.
Но тем не менее, значения принимают, при выполнении задач.
Ищу решение по этому вопросу.
С уважением,
Максим
possibly reistry danage when running your program
Hello
Two weeks ago I cleaned things up with your program..I rememeber cleaning "empty folders". Not sure if I touched registry clean.
I recently have noticed that my outlook email querries (IMAp etc) does not do a proper search . Only a few items related to the question show up.
Also Onenote desktop does not search and find all items. On other computers One note and outlook work fine. On my main desktop, (which has your program) some items are found on the search but not all that should be there in the querry.
On Onenote web on this machine, all items are searched and work.. Other computers work fine. But onenote deskotop on this one machine only finds few items related to the question. Talking to microsoft they think somethinkg happended to windows search in registry.
Can I recover what might ave been deleted in the cleanup. Are files deleted, stored somewere
Any ideas re the problem.
Thank you
Cliff Shnier
Two weeks ago I cleaned things up with your program..I rememeber cleaning "empty folders". Not sure if I touched registry clean.
I recently have noticed that my outlook email querries (IMAp etc) does not do a proper search . Only a few items related to the question show up.
Also Onenote desktop does not search and find all items. On other computers One note and outlook work fine. On my main desktop, (which has your program) some items are found on the search but not all that should be there in the querry.
On Onenote web on this machine, all items are searched and work.. Other computers work fine. But onenote deskotop on this one machine only finds few items related to the question. Talking to microsoft they think somethinkg happended to windows search in registry.
Can I recover what might ave been deleted in the cleanup. Are files deleted, stored somewere
Any ideas re the problem.
Thank you
Cliff Shnier
Diagnostic Policy Service Cannot Start.
Diagnostic Policy Service Cannot Start. Access is Denied – Error 5 Fix
マウスDELL Win11 にてマウスの表示しない
DELL OPTIPLEX 3060 SFF にて 突然 マウスの表示がしなくなりどのようにして、マウスの表示がするようにできますか?
マウスの表示がしないですが、動かしていると動作領域に入ると、クリックするとソフトが動作するときもありますが、すべてで動作
させることは難しいです。
マウスの表示ができるようにはどうしたらよろしいですか?この動作じょうたいは別のPCから送信しています。
マウスの表示がしないですが、動かしていると動作領域に入ると、クリックするとソフトが動作するときもありますが、すべてで動作
させることは難しいです。
マウスの表示ができるようにはどうしたらよろしいですか?この動作じょうたいは別のPCから送信しています。