910 questions
A problem caused this program to stop interacting with Windows.
Problem Event Name: AppHangB1
Application Name: Ddfs32_400.exe
Application Version: 0.0.0.0
Application Timestamp: 602cd97f
Hang Signature: eff9
Hang Type: 134217728
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1031
Additional Hang Signature 1: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 2: 4777
Additional Hang Signature 3: 477790f40c8afa87ecb7402697914cec
Additional Hang Signature 4: eff9
Additional Hang Signature 5: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 6: 4777
Additional Hang Signature 7: 477790f40c8afa87ecb7402697914cec
Wo steckt der Fehler? - Was soll ich überprüfen?
Application Name: Ddfs32_400.exe
Application Version: 0.0.0.0
Application Timestamp: 602cd97f
Hang Signature: eff9
Hang Type: 134217728
OS Version: 6.3.9600.2.0.0.272.7
Locale ID: 1031
Additional Hang Signature 1: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 2: 4777
Additional Hang Signature 3: 477790f40c8afa87ecb7402697914cec
Additional Hang Signature 4: eff9
Additional Hang Signature 5: eff9e5103e62437273df6ec28305e96a
Additional Hang Signature 6: 4777
Additional Hang Signature 7: 477790f40c8afa87ecb7402697914cec
Wo steckt der Fehler? - Was soll ich überprüfen?
Error 0xc1900101
Dear Sir/Madame,
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
I keep getting error 0xc1900101 on Windows Update.
It all started when I switched to new SSD 970 EVO 500GB.
Windows have had updated few times than came version 20H2 which doesn't seem to work.
Updater downloads it, instal it and then during instalation after reboot it colapses around 24%. Then it reboots and I get this error record.
The computer is DELL XPS 13 9360 with i7, 8GB ram.
It runs Windows 10 PRO 1909
Hope You can help
Kamil Adamski
mise à jour logiciel
Bonjour,
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Hier j'ai payé le renouvellement de mon abonnement à auslogic Bootspeed 11, et je ne vois pas de mise à jour sur la validité de mon programme qui expire demain.
Pouvez vous me dire si mon paiement à bien été enregistré ? et si mon logiciel va être mis à jour ?
Dans l'attente de vos réponses.
Cordialement.
Error Message
After running Bootspeed for the first time in a long time, I get the error message, "The operating system is not presently configured to run this application." It affects my Bluetooth, plus it is annoying to have the error message popup on my screen every five minutes. Do you recommend that I go to "Restore Points"? I have an early February date available.
que software utilizar para convertir word a Pdf y viceversa
como se abren archivos word de una carpeta sin que se conviertan a Pdf y viceversa
Can't scan disk space
I've been using BoostSpeed successfully on Windows 7 for many years. It hasn't been working for the last 2 months. When it scans the disk space, it gets stuck on a temporary Skype file, and stops scanning. To fix this, I have to re-start my computer, and re-install BoostSpeed 12. My computer has been running painfully slow for the last 2 months. PLEASE HELP!
ESENT Help.
svchost (3804, R, 98) SRUJet: New log file cannot be created because the database cannot write to the log drive. The drive may be read-only, out of free disk space, misconfigured, or corrupt. Error -1032.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Eliminar una partición creada por Windows
Mi laptop HP tiene una memoria de 120GB. De los cuales hay una partición llamada HP_RECOVERY (G) que ocupa 21GB.
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Cuando adquirí la laptop traía el Windows 7, ahora tiene el Windows 10.
Todo el disco duro lo uso para instalar software, no hay archivos de ningún tipo almacenados excepto los del sistema y de las aplicaciones que tengo instaladas.
Todos los datos de otro tipo (básicamente imagenes),los manejo a través de discos duros externos.
Deseo eliminar la partición (G) con el fin de abrir más espacio en el disco duro de la laptop, ¿Es posible?
Right Click Menu
Hello, My question is this: From time to time when I right mouse button click on a file on the desktop or in a folder the computer just freezes with the little blue circle turning for like 20-30 seconds before the right click menu will pop up, it does not do it all the time and seems random and there does not seem to be a reason for this, I have followed all the tutorials online that I could find and that is even why I purchased your software but nothing seems to solve this annoying issue, hopefully you can help. I am also attaching a screen shot to my computer spec details
windows photo viewer suddenly missing
since years I'm using Windows Photo Viewer to see my pictures (jpg and others)
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Suddenly this possibility disappeared, I think due to an automatic update of my system by Microsoft. With the option "open with", I
only get PAINT and 3D PAINT, but I'm not intersted in those programs.
I can find the folder Windows Photo Viewer in my Program Files, but this folder has two subfolders (one Eng and one NL) and both are empty. I don't understand why, because I didn't was deleting them.
I heard it is possible to restore the old PhotoViewer in Win 10 , by inserting a register- script.
Can you help me to find that script ?
Thanks on beforehand.
Jacques Valembois
Windows freezes frequently
I cannot seem to resolve the freezing problem. sometimes it freezes after a very short time after start-up and occassionally it works for quite sometime before it freezes again.
Do you have any suggestios what I can do to stop this or how I can find what may be causing this.
I am not a technical person so any answer have to be spoon-fed.
Thanks
Host Services for Windows Processes
Does Boost speed address excessive memory use by Host Services f or Windows Processes? This app is continually hogging 1/3 of my PC memory.
reparer windows 10
MON WINDOWS 10 NE FONCTIONNE PAS BIEN PAR DE BARRE DES TACHES NI L EXPLORATEUR DE WINDOWS
mot de passe bios perdu
j'ai un pc hp compaq 6730s sous N°=CNU9020NKN
mon mot de passe par defaut (e9lo1719s9) n'a pas d'effet
j'ai change la pile bios rien
j'ai utilise hiren's bootcd rien
Aider mois s.v.p et merci d'avance................
How do I stop starting up when I start the computer
When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.
once power button pressed to start up...
...my PC makes three long, low tones followed by four shorter, higher tones. Plus it is very slow to start.
Any help gratefully received
Thank you
Tom
Any help gratefully received
Thank you
Tom
AUTOMATION ERROR THE OBJECT INVOKED HAS DISCONNECTED FROM ITS CLIENTS RUN-TIME ERROR
PLEASE HELP!!!!!!! I INSTALLED A PROGRAM CALLED "QUANTUM RESONANCE MAGNETIC ANALYZER" ON COMPUTER EVERY THING INSTALLED FINE, IT CREATED A DESK ICON ETC... BUT WHEN I TRY TO OPEN THE PROGRAM UP THE MESSAGE IN THE SUBJECT ABOVE IS WHAT I KEEP GETTING. I TRIED EVERYTHING!!!!!!!!!!!!!!!! I RESTARTED THE COMPUTER, I DID THE SFL /SCANNOW THING, I DISABLED MY VIRUS PROTECTION, I UPDATED DRIVERS BUT NOTHING!!!!!!! IM TRULY AT A LOSS IM VERY FRUSTRATED BECAUSE I PAID OVER 100 DOLLARS FOR THE PROGRAM AND I CANT USE IT! SO CAN YOU PLEASE HELP? OR WILL I HAVE TO TRY TO SEND THE PROGRAM BACK? I HAVE HP COMPUTER WINDOWS 10 MICROSOFT THANK YOU! MY NAME IS KENNETH BINGHAM
Keyboard built-in has been made mostly garbage
Keyboard built-in has been made mostly garbage, by enemy espionager. I do not seem to have backup to fix it nor for resetting Windows.
(These words are from a USB keyboard.)
(These words are from a USB keyboard.)
Driver Updater
Driver Updater won't scan. Says its blocked by Firewall. McAfee doesn't show that it's quareentined or blocked.
ARQUIVOS CONTAMINADOS POR TROJANS
Como o auslogics bootspeed informa que tudo no meu computador esta correto se meu antivirus informa que ele esta contaminado por Trojans, pop up etc...
O sistema foi atualizado compulsoriamente pela Microsoft para o win 11.
O sistema foi atualizado compulsoriamente pela Microsoft para o win 11.
file explorer
since my updates yesterday file explorer has stopped working
I tried to reset using a previous reset point but that did not work
I tried to reset using a previous reset point but that did not work
Программа была заблокирована администратором
Вероятно возникла проблема с цифровой подписью файла integrator.exe. Программа не может быть активирована лицензионным ключом.
проблема со входом в браузеры
Здраствуйте мне очень нужна Ваша помощь, у меня не отрывает страницы ни один браузер .Интернет есть , есть гугл , есть опера . но не открывает . не работают ссылки . Иными словами даже не появляются окна после нажатия ярлыка картинки на которые клацаещь а толку нет. Интернет есть показывает статус что все работает , ошибок не находит программа сканирования ... Помогите пожалуста
Quicken Lock
Occassionally, Quicken crashes. When it does, I must either force quit BoostSpeed or Restart my computer. This is because BoostSpeed locks the Quicken data file. I would like to exclude this file (or the containing folder) from any scanning or "interference" from BoostSpeed - can I do this? Is there any way to prevent BoostSpeed from tormenting my Quicken Files?
Mots de passe
Bonjour,
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
BootSpeed a chaque analyse du système, il me supprime les mot de passe et a chaque fois je suis obligé de resaisir ce dernier.
Comment effectuer de facon que BS ne supprime plus les mots de passe ?
Cordialement
Denis Schmitt
laptop is shutting down 30 sec
Hello
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
Let me tell you that I am satisfied with the performance of the BostSpeed 13. Great Job.
I run the program, and everything is fine. The speed of the PC is unbelievable.
Except that, why does the laptop shut down 30 sec later under the electricity power and does not shut down when it is on battery power supply? Following the startup with battery I insert the plug of the electricity power and everting is running correctly. The matter is under electricity power plug in start up.
What can be the problem?
Looking forward for your answers,
Regards,
Erol
PC Details:
MSI PX60 2QD
C: SSD 250GB
Windows Update
Error message: "Your device is missing important security and quality fixes.", tried several fixes...no result.
Memory Insufficient
I am running Auslogics Disk Defrag 11 on a Windows 2012 R2 server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
Version 11.0.0.2
Full Version (PRO)
I have two drives I am trying to defrag. It used to work but now I am getting "Memory insufficient to perform this operation"
The drives are large:
R drive 83 TB - 19 TB free
S drive 40 TB - 18 TB free
It has 128 GB of memory
Page file is set set to automatic
I have a similar server and it does not have any issues.
Any settings or suggestions I could try.
I have been running Auslogic for about a year with no problem but since the last update I started having this problem on this one server.
ICカードリーダーが使えない
Smart Card Device Enumeration Serviceが「停止中…」と表示され、ICカードリーダー使用できない。ICカードリーダー自体はデバイスマネージャーで「CIR215 PICC」と表示され、「正常に動作しています」の状態です。コマンドラインからtaskkillで強制終了して再実行をしても、すぐに停止中でフリーズしてしまいます。
re windows 10 not updating from 1909 to 22H2.
Follow up on not being able to update to Windows 10 22H2 from 1909.
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
I have gone through all the suggestions. Update assistant ,Media creation tool,Update troubleshooter , resetting windows update components and still get the error: initiation failed during First-Boot phase at Migrate-Data.
USB bootable disk also did not succeed. I have disabled all periferals , ran fksdsk, restore health, checked that all drivers are up to date etc.. and still get the same error.
Error messages from windows logs : Error Essent 455 Loggin/Recovery. Error Security center 17 None. Error Application error 1000 Application crashing Events. Error Security-SPP 16385 None. These occur multiple times in the log file.
I also disabled Firewall and anti virus software, all to no avail.
Any idea what else I might try ?
Fonction "rechercher dans" en haut à droite des fenêtres windows 10
la fonction de recherche est totalement inactive. On ne peut rien inscrire dans la case prévue.