376 questions

Not able to install an upgrade for Boostspeed 12.2.0.0

I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0

669 views
Jan 27, 2022 at 03:38 PM

проблема с регистрацией

Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
706 views
Jan 26, 2022 at 10:24 PM

Lizenz

Warum wurde meine Lizenz gesperrt ich kann das Programm nicht mehr öffnen ich habe im Dezember 2021 verlängert und gekauft. Bitte um Freischaltung. Danke
576 views
Jan 26, 2022 at 07:56 PM

ユーザー制御

デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。

941 views
Jan 26, 2022 at 09:10 AM

Could not activated my license

I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
706 views
Jan 26, 2022 at 02:49 AM

Activating Software Problem

I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce

Content hidden to protect privacy

724 views
Jan 25, 2022 at 05:18 PM

BOOT SPEED PRO

I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?

LICENCE N°:

Content hidden to protect privacy


THANK YOU

593 views
Jan 25, 2022 at 02:26 PM

About Auslogics BoostSpeed 12

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

Content hidden to protect privacy

725 views
Jan 25, 2022 at 06:59 AM

Hirosuke Kajiyama

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

License key ライセンスキー:
Auslogics BoostSpeed 12

Content hidden to protect privacy

834 views
Jan 25, 2022 at 06:46 AM

Pro version ?

Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.

Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
709 views
Jan 25, 2022 at 06:01 AM

Admin. Blocked

When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
809 views
Jan 25, 2022 at 05:56 AM

アプリが起動しない

前略、 
NOBUYUKI KOIZUMI(小泉宣之) 

Content hidden to protect privacy


以上

732 views
Jan 25, 2022 at 04:07 AM

activation Boostspeed

Hello,
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
558 views
Jan 24, 2022 at 11:37 PM

Integrator.exe wird blockiert

Beim Versuch, Boost Speed von der Taskleiste aus zu öffnen, erscheint folgende Mitteilung:
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
640 views
Jan 24, 2022 at 10:35 PM

Pro Version

Why won't my system allow me to upgrade to Pro Version? I have started getting a message - An Administrator has blocked you from using this App. That's not righty because I am the administrator and have checked my settings and can't see anything wrong. I have re-installed program and un-installed a few things that might be causing conflict and still can't find problem.
886 views
Jan 24, 2022 at 10:02 PM

Auslogics 12

переустановил виндоус ..поставил программу Auslogics 12 а ключь не могу поставить.... Помогите...
596 views
Jan 24, 2022 at 07:47 PM

versione Pro

Buonasera volevo chiedere se avevo acquistato versione registrata normale o Versione Pro perche nonostante il seriale che mi e' stato inviato

Content hidden to protect privacy
........ non si attiva la versione Pro

Poi ho notato all'inizio un notevole consumo di risorse CPU.......poi molto dopo si e' Abbassata anche il 70%

604 views
Jan 24, 2022 at 06:58 PM

pro version

I purchased boot speed pro #

Content hidden to protect privacy
but the program is asking me to activate pro version. Why is this happening? What should I do.

649 views
Jan 24, 2022 at 06:23 PM

My BoostSpeed app will not recognise my Pro status

Examples of this issue in the atchd doc.

My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.

I do have and have paid for Pro for the 300 days.

When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?

Thank you for your support and education. Shane Ostrom,

Content hidden to protect privacy

539 views
Jan 24, 2022 at 05:18 PM

Boostspeed lost Pro licence

I have a Pro licence for Boostspeed and for Malware but both appear to be disabled. If I try to activate the program and enter the activation key I initially get a message saying that the program is registered. However it isn't and the the status is still to upgarde or acivate Pro.

If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.

Hope you can help.
629 views
Jan 24, 2022 at 12:27 PM

About Auslogics BoostSpeed 12

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

Content hidden to protect privacy

725 views
Jan 25, 2022 at 06:59 AM

Läuft MS Money98 auch unter Windows11?

Läuft Microsoft Money98 auch unter Windows11?
725 views
Jul 23, 2021 at 09:29 PM

Auslogics Boostspeed 12 problem

When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.

It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.

How do I get the SCAN to switch drives?
725 views
Nov 23, 2021 at 08:28 PM

Activating Software Problem

I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce

Content hidden to protect privacy

724 views
Jan 25, 2022 at 05:18 PM

SurfShark VPN problem with DNS wire???? with BS and Surfshark .3.0

Hi,let say I like your software very much. Please show me how to end error message form BS "interupted DNS" from Surfshark
720 views
Mar 11, 2022 at 08:36 AM

табло на раб стол

как поставить табло с cpu ит.д- на рабочем столе мини экран
719 views
Mar 02, 2022 at 07:40 AM

problem with auslogics

It wont let me create a restore point, and the restore points I had created it has deleted.
715 views
Oct 21, 2021 at 04:46 PM

msedge.exe

Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
713 views
Dec 29, 2021 at 05:48 PM

window defender

my window defender Virus & threat protection is taken over by kypersky internet security. Can you get back my window defender if i buy pro.
713 views
Oct 25, 2021 at 03:41 AM

ошибка какая-то

Переодически выдает ошибку, я так понимаю это связанно с каким-то файлом отвечающим за обновление Майкрософт Офиса. Появляется не так, чтобы часто. Может 1 раз при перезапуске компьютера. Как это можно было бы убрать? Переустановить офис, наверное...
712 views
Feb 25, 2022 at 06:27 PM

question about WIN10 servises

how can I stop the unnecessary servises in windows10? without harming to my divice or OS.
710 views
Jul 23, 2021 at 11:49 AM

Breakaway Pipeline

My Breakaway Pipeline is listed as a problem. How do I correct this?
710 views
Oct 14, 2022 at 12:37 AM

Pro version ?

Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.

Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
709 views
Jan 25, 2022 at 06:01 AM

Could not activated my license

I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
706 views
Jan 26, 2022 at 02:49 AM

проблема с регистрацией

Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
706 views
Jan 26, 2022 at 10:24 PM

Bootspeed 13

I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.

kind regards chris moore
703 views
Feb 14, 2022 at 09:16 PM

Unable to Install the new Auslogic Boostspeed 13.0.0.1 update

Hi

I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0

I need further instructions to properly install the new update.
701 views
Nov 16, 2022 at 04:24 AM

ソフトを起動しようとすると保護がかかってしまいます。

Auslogics BoostSpeed 12をしようしていますが、最近になってソフトを起動しようとすると下記のメッセージが表示されます。

「ユーザーアカウント制御
 このアプリは保護のためブロックされました」

対処方法をご教示ください。
701 views
Jan 29, 2022 at 02:32 AM

Faster opening

I would like to know how to make google chrome open faster?
700 views
Sep 18, 2021 at 08:17 PM