376 questions

Not able to install an upgrade for Boostspeed 12.2.0.0

I am unable to install the upgrade for Boostspeed 12..2.0.0 to 12.2.0.1
After completion of the upgrade software, the Help box remains showing my Version as 12.2.0.0

670 views
Jan 27, 2022 at 03:38 PM

проблема с регистрацией

Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
706 views
Jan 26, 2022 at 10:24 PM

Lizenz

Warum wurde meine Lizenz gesperrt ich kann das Programm nicht mehr öffnen ich habe im Dezember 2021 verlängert und gekauft. Bitte um Freischaltung. Danke
577 views
Jan 26, 2022 at 07:56 PM

ユーザー制御

デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。

941 views
Jan 26, 2022 at 09:10 AM

Could not activated my license

I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
706 views
Jan 26, 2022 at 02:49 AM

Activating Software Problem

I have now come to the end of my tether with this piece of software. I have been sent a Registration Code because the software I purchased on the 14 Dec 2021 keeps on asking me to Activate Pro Version. I removed the programme from my computer and started afresh. The programme dowloaded and the after putting in my Licence Key it advised me that the programme was registered. However, there is white writing on a green backgroumd in the bottom right hand corner stating: Activate Pro Version (when pressed advises what you get with the Pro version - which I have already purchased!) I have added this as an attachement on an MS Word doc.
Carl Bruce

Content hidden to protect privacy

724 views
Jan 25, 2022 at 05:18 PM

BOOT SPEED PRO

I HAVE RENEWED MY BOOT SPEED SUBSCRIPTION BUT I CAN'T PERFORM CERTAIN FUNCTIONS I AM ASKED TO TAKE PRO VERSION WHILE I HAVE ALREADY PAID THE BASIC VERSION HOW TO UPGRADE TO THE PRO VERSION WITHOUTPAYING THE 50 EUROS MORE ?

LICENCE N°:

Content hidden to protect privacy


THANK YOU

593 views
Jan 25, 2022 at 02:26 PM

About Auslogics BoostSpeed 12

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

Content hidden to protect privacy

725 views
Jan 25, 2022 at 06:59 AM

Hirosuke Kajiyama

Auslogics BoostSpeed 12 The software is blocked by the administrator. ソフトが管理者によってブロックされています。
Please unblock ブロック解除をお願いします 

License key ライセンスキー:
Auslogics BoostSpeed 12

Content hidden to protect privacy

834 views
Jan 25, 2022 at 06:46 AM

Pro version ?

Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.

Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
709 views
Jan 25, 2022 at 06:01 AM

Admin. Blocked

When trying to open Boostspeed, I am getting a popup stating Admin Blocked, go to an Administrator Integrator.exe. How can I clear this. If I re-download the basic program will open, when I type in my registration code, I'm sent to the store pager in AOL. Any help with this problem would be appreaciated.
Thank You
James Elder
809 views
Jan 25, 2022 at 05:56 AM

アプリが起動しない

前略、 
NOBUYUKI KOIZUMI(小泉宣之) 

Content hidden to protect privacy


以上

733 views
Jan 25, 2022 at 04:07 AM

activation Boostspeed

Hello,
I have been using Boostspeed pro for years, and now the software only opens in the free version, even when I copy the activation key received in December by email.
A window appears, saying "Registered software", yet the software remains in free version.
Can you help me solve this problem?
558 views
Jan 24, 2022 at 11:37 PM

Integrator.exe wird blockiert

Beim Versuch, Boost Speed von der Taskleiste aus zu öffnen, erscheint folgende Mitteilung:
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
640 views
Jan 24, 2022 at 10:35 PM

Pro Version

Why won't my system allow me to upgrade to Pro Version? I have started getting a message - An Administrator has blocked you from using this App. That's not righty because I am the administrator and have checked my settings and can't see anything wrong. I have re-installed program and un-installed a few things that might be causing conflict and still can't find problem.
886 views
Jan 24, 2022 at 10:02 PM

Auslogics 12

переустановил виндоус ..поставил программу Auslogics 12 а ключь не могу поставить.... Помогите...
596 views
Jan 24, 2022 at 07:47 PM

versione Pro

Buonasera volevo chiedere se avevo acquistato versione registrata normale o Versione Pro perche nonostante il seriale che mi e' stato inviato

Content hidden to protect privacy
........ non si attiva la versione Pro

Poi ho notato all'inizio un notevole consumo di risorse CPU.......poi molto dopo si e' Abbassata anche il 70%

604 views
Jan 24, 2022 at 06:58 PM

pro version

I purchased boot speed pro #

Content hidden to protect privacy
but the program is asking me to activate pro version. Why is this happening? What should I do.

649 views
Jan 24, 2022 at 06:23 PM

My BoostSpeed app will not recognise my Pro status

Examples of this issue in the atchd doc.

My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.

I do have and have paid for Pro for the 300 days.

When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?

Thank you for your support and education. Shane Ostrom,

Content hidden to protect privacy

539 views
Jan 24, 2022 at 05:18 PM

Boostspeed lost Pro licence

I have a Pro licence for Boostspeed and for Malware but both appear to be disabled. If I try to activate the program and enter the activation key I initially get a message saying that the program is registered. However it isn't and the the status is still to upgarde or acivate Pro.

If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.

Hope you can help.
629 views
Jan 24, 2022 at 12:27 PM

SSD optimization for a whole day

Hello
I am using SSD optimization with Auslogic Bootspeed 12 to optimize my C drive (114 GB free 54 gb) it took a whole day to finish. Is it normal for a ssd optimization running? (while it only took 5 mins to optimize my D drive 98GB free 54GB). How frequently should I run SSD optimization
648 views
Oct 22, 2021 at 03:46 PM

register Problem of the Auslogic boot speed pro12

Hello, I hope you are well.
I had aready register the code the i got the email after paid for it.
and when i check programe registertion its show this programe is registed. but I can not use it as the pro version.
it is still have the Activate pro Version button on the down right side.
Please help.....
648 views
Jan 23, 2022 at 03:53 PM

recovery of duplicate files accidentaly removed

I have removed duplicate files using the software, unfortunately i lost many RAW files of the photographs instead of JPEG versions of the RAW files, I wish to recover my raw files which was deleted first from the hard drive into the recycle bin and removed from there, the RAW files are Nikon NEF files. I am enclsong the JPEG of the RAW file which was deleted, many other RAW files were also lost accidentally ,
647 views
Sep 26, 2021 at 05:35 PM

半日経っても終わりません。

スキャンの安定性が13%で半日経ってもくるくる回って進みません。対処法を教えて下さい。
647 views
Nov 15, 2021 at 10:01 AM

ripristino funzionamento IRDA

Buonasera
per un breve periodo con windows 10 ha funzionato l'IRDA (infrarosso) che uso per scaricare i dati di un vecchio cardiofrequenzimetro dopo un aggiornamento l'IRDA non ha più funzionato e nonostante le ricerche su internet per la risoluzione del problema e l'applicazione dei parametri consigliati sempre su internet la mia pennetta IRDA non funziona. Sapete, per cortesia, indicarmi un modo per ripristinare il funzionamento dell'IRDA?.
Ringrazio per la gentile attenzione bisegna tonino

644 views
Oct 27, 2021 at 04:01 PM

windows 10

Hi, when cleaning up windows 10 by using boostspeed 12, it deletes all my downloaded files and videos ! how to resolve or avoid this ??? Thanks in advance
L Lantveld
644 views
Nov 18, 2021 at 01:26 PM

blocked

I now get a this app has been blocked for your protection

using my shortcut for disk defragmenter pro
642 views
Jan 21, 2022 at 05:40 AM

Register errors

I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
641 views
Jan 01, 2022 at 12:38 AM

Integrator.exe wird blockiert

Beim Versuch, Boost Speed von der Taskleiste aus zu öffnen, erscheint folgende Mitteilung:
"Diese App wurde aus Sicherheitsgründen blockiert.
Ein Administrator hat die Ausführung dieser App blockiert
Weitere Informationen erhalten Sie vom Administrator.
Integrator.exe"
Ich bin selbst der Administrator meines Systems, sehe aber keine Möglichkeit, den Fehler zu beheben.
Bitte helfen Sie mir.
640 views
Jan 24, 2022 at 10:35 PM

Gah. Cannot access Report

I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
639 views
Dec 13, 2021 at 06:38 PM

Driver Windows...

3rd Question is regarding with Drivers for my HP PC: Usually I'm using 'Auslogics Driver-Updater to keep All my PC -Drivers Up-to-Date all the Time... but, but at the same time by the way I've used to use 'PC Help Soft Driver Updater and 'Driver- Genius as well other softwares for keeping my PC Drivers up-to-date. And now the ''Question'' is: Are There any Negative effects or affects to break my PC 'Stability or to break my PC Performance if am' I using more then one company Driver-Updaters - Software for only one PC?, or there is no need to be afraid or no need to worry of any negative effects to break my PC 'Stability/Performance and I Can use as many as I want... and as many as I wish 'Driver-Updaters I mean from different companies 'Software for my HP PC...?
638 views
Nov 16, 2023 at 01:18 PM

Intrigrator problem

How to I correct the Intigrator.exe login problem?
634 views
Feb 18, 2022 at 07:50 AM

Notifications

I use Bitdefender VPN for anonomous web usage on my Windows 10 desktop computer. I connect to the internet using a USB wifi adapter. Last week the program updated. Now everytime I connect I get a message from BoostSpeed 12 about an attempt to change DNS detected. The next line states- Adapter:TAP Windows Adapter v9. The next line states-Value: 198.51.100.1
How do I stop getting this particular notification without stopping all notifications?

Thanks
T. Kinstler
mitland@aim.com
633 views
Jun 15, 2022 at 08:48 PM

Making best use of the high system resource usage detected warning

Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
629 views
Jan 10, 2022 at 03:20 PM

Boostspeed lost Pro licence

I have a Pro licence for Boostspeed and for Malware but both appear to be disabled. If I try to activate the program and enter the activation key I initially get a message saying that the program is registered. However it isn't and the the status is still to upgarde or acivate Pro.

If I close the program completely and try to re-run I get a message saying that the administrator is blocking me via integrator.exe,
however I am the administrator.

Hope you can help.
629 views
Jan 24, 2022 at 12:27 PM

pictures

After installing BOOTSPEED 12 and doinG a full scan THE PICTURES IN MY PICTURE FOLDER VANISHED FROM MYCOMPUTER
any idea were can I find them
Local disk (c)>users>cocon>Pictures (folders are empty)
627 views
Feb 09, 2022 at 01:44 PM

Ads

I have ads turned OFF in General settings, however an ad pops up everytime after a defrag is completed wanting me to purchase Boostspeed 12. An ad also pops up when I open the program. How do I get rid of these ads since I have purchased this pro version?
They are very annoying and they cover up my scan results after defrag is completed.


Note: I have also turned off all tray notifications in General Settings and I am still getting these pop ups. Please fix.

Thank you


622 views
Feb 12, 2022 at 06:07 PM

PROバージョンを有効にするについて

常に” PROバージョンを有効にする ”が表示され、 PROバージョンでは無いようです、入るにはどうしますか? 
ライセンスコードは購入しています、コードを入力すると、畝に " GING ”のHPに入ります、なにかインプットが入りますか?

 Auslogics BootSpeed 12 でアイコンからソフトに入ろうとすれうと、” このアプリは保護のためブロックされました ”と表示され入れません。
ブロックを除去する方法を教えて下さい

windows search

I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
619 views
Jan 04, 2022 at 09:49 AM

Product will not activate

I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -

Content hidden to protect privacy

617 views
Jan 20, 2022 at 10:39 PM