298 questions
graphics card
what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
Something happen to this device after i ran internet optimization
Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
Cross mark on wifi symbol
This happens sometimes . When i on the laptop there is a red cross mark on wifi button and when i on the wifi it doesnot detect any network . But after I off and on the aeroplane mode and the system a lot of times it goes off . It is not related to the function key which disables it as i tried it .
USB-C Gigabit Ethernet Mini Adapter does not indetify network
I have just purchased a USB-C Gigabit Ethernet Mini Adapter and I cannot connect to the internet with it. The device connects to my computer and is recognised, but it says "Unidentified Network" and underneath "No Network". My machine uses Windows 10. Can you help fix this problem?
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
I have exchanged the USB-C device because I thought it was faulty, but the same problem is repeated.
Graphics Card
The results of the "Maintain" application suggested that I upgrade my card from 8.1 to 9.0 and above. How do I do this?
Диск содержит ошибки
При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?
SSD Defrag Process
I use a Dell Latitude with an SSD drive. I note that some people recommended that the SSD should not be defragged as it can cause unnecessary wear and tear which will reduce its life span. Every time I run Boot speed it attempts to defrag the SSD. Two questions – (1) Does it really shorten the life of a SSD if it is defragged on a regular basis and (2) If I chose not to defrag how I stop this from happening other than every time manually untick the defrag box prior to hitting the “resolve all” button.
Many thanks in advance for your response.
Disengaged Microphone
I performed some of the scans and tweaks, which resulted in my system's microphone being disengaged. How can I re-engage the microphone that I need for my webinars.
Tastatur nicht Erkant
Windows 10 Bennent meiner Tastaturtreiber nicht richtig,dann Arbeitet Tastatur nicht mehr.
Дефрагментация SSD и дефрагментация реестра при загрузке в компъютере с SSD.
1. Почему программа начала дефрагментировать компъютер с диском SSD, хорошо ли это (вроде ему нужна только оптимизация), и если нет, как отключить дефрагментацию SSD ?
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
2. Хорошо ли делать дефрагментацию реестра при перезагрузке компъютера с SSD ? (Меня фсегда очень интересовал этот вопрос).
Заранее спасибо.
Speech Recognition in Word
Hi,
I am not able to set up Speech Regocntion or dictate.
What do I need to do? Keep getting language recognition dialogue although everything says it is set to English (UK).
Best,
Adrian
Disc Error
I have just reinstalled a new windows system to a new SSD HDD
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
It is still showing errors on Disc Doctor and advises running CHKDSK on restart
As soon as I Scedule a disc scan on restart - it completely messes up the system reloading - and PC will not boot
I have a disc image I took - using acronis so I can use a boot disc and restore - but each time I try to fix the "disc error " my machine will not boot. Is this an SSD error
Advice please
Disfonctionnement imprimante
Bonjour,
Pourquoi après chaque mise à jour de votre produit, mon imrpimante ne fonctionne plus, je suis obligé de la désinstaller puis refaire une installation. ce qui du temps et de l'argent perdu. Si cela continu, je me verrai dans l'obligation de ma séparre de vos services.
Salutation.
Pourquoi après chaque mise à jour de votre produit, mon imrpimante ne fonctionne plus, je suis obligé de la désinstaller puis refaire une installation. ce qui du temps et de l'argent perdu. Si cela continu, je me verrai dans l'obligation de ma séparre de vos services.
Salutation.
блютуз гарнитура HONOR AM-61
Гарнитура сопряжается но не подключается к компьютеру, со смартфонам все работает
Computer slowness one in internet
I have your free version of BoostSpeed 12 running on an old PC whose features are:
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
32bit Winsdows 7 Ultimate operating system
Processor AMD-A4-5300 APU with Radeon (tm) HD Graphics 3.40GHz
Memory 2.00GB (1.46GB usable)
I constantly suffer from great slowness when I connect to the Internet via WiFi
Yesterday, once BoostSpeed 12 was installed, I carried out its cleaning procedures, and after connecting to the internet it sent me a message on two occasions indicating slowness on my computer and that this would be resolved with the PRO version. I want to know if this is real, or if the problem lies in insufficient memory, old processor, or disk characteristics, or all of them, and should I buy a new computer; but, for the time being, I want to avoid this last option.
Headphones connected but no sound
I;ve connected my JBL headphones to my PC but there is still no sound
Slower Internet Speeds
Hello, I have verizon gigabit internet. Since February I built a pc and was enjoying 700 mbps speeds using ethernet connection to my Nighthawk XR500. For the last couple months, I have been experience under 50 mbps speed and cannot figure out why. I have tried updating drivers and software and firmware but nothing has worked. I purchased boostspeed and optimized but has not worked. Any help would be appreciated. I get speeds of around 500 to 600 on my phone.
The graphics adapter performance
As a result of system optimization, I receive the message "The graphics adapter performance index is 8.1, which is lower than the average system performance index of 9.1. It is recommended that you replace the graphics adapter with a more powerful one."
My question: Does this affect overall system performance? What will change if I replace the video card with a more powerful one, given that I do not play video games?
My question: Does this affect overall system performance? What will change if I replace the video card with a more powerful one, given that I do not play video games?
fragmentation
normalement les SSD n doivent pas être défragmenter .... comment désactiver la déframentation sur votre logiciel
merci de votre réponse codialement
merci de votre réponse codialement
Recordig Audio
I would like to record audio from my turntable (Line level) to my Dell 5567 Laptop. The only Recording device that windows detects (listed in the "Recording" tab of the "Sound" dialogue box) is "Microphone" Obviously I don't want to use Microphone as the Recording device.
I would like to use the 3.5mm Jack Speaker/Headphone socket as the Recording input device, but although it is listed as a Playback device, it is not listed as a Recording device.
I would like to use the 3.5mm Jack Speaker/Headphone socket as the Recording input device, but although it is listed as a Playback device, it is not listed as a Recording device.
Auslogics icon for all users
I want to know how my husband can get Auslogics on his side of our computer? He tried to download the new version but encountered an error! Is there a fix for this?
ssd com problemas
boa noite, eu comprei um ssd no alixpress, la dizia que era 7800 mbps de leitura e escrita, logo quando chegou ele chegava a 3900 apenas tanto de escrita quanto de leitura mas n me encomodava isso, de ontem pra ca o computador começou a travar muito e eu passei o crystal disk mark e dava apenas 140 de leitura e 72 de escrita, ja fiz de tudo mas n resolve, tem 1 mes so que comprei o ssd novo, ja formatei o pc, ja usei sfc /scannow , CHKDSK /R , DISM todos disseram que nao tinham erros, ja desfragmentei ele aqui no app mas continua da mesma forma.
Gigabit tuning
What should the settings be for really high speed input. I have gigabit internet and your system is set for really slow internet.
Problem device RAID Controller
Name, Value, Advanced
Problem Devices
RAID Controller, PCI\VEN_11AB&DEV_6440&SUBSYS_644011AB&REV_02\4&15442326&0&0008, Device drivers are not installed
I am using SSD drives in an old Lenovo C20 ThinkStation, designed to run servers, as a standard PC
Do I still need to enable RAID Controller in this device.
Should I disable it, or install the drivers as requested
Problem Devices
RAID Controller, PCI\VEN_11AB&DEV_6440&SUBSYS_644011AB&REV_02\4&15442326&0&0008, Device drivers are not installed
I am using SSD drives in an old Lenovo C20 ThinkStation, designed to run servers, as a standard PC
Do I still need to enable RAID Controller in this device.
Should I disable it, or install the drivers as requested
Sound interface stopped working on Windows 11
My good old Line 6 Toneport KB37, midi controller, and external soundcard combo stopped working on my new PC.
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
When running on an Asus TUF H310M with a Core i5 9400F and 16GB of RAM, it was working just fine.
Now, on the new setup, a Gigabyte Aorus Elite B760M with a Core i5 13th gen and 32GB of DDR5 RAM, the installation and driver setup ran okay. However, when playing any kind of music or sound file in any player, including YouTube, streaming services, you name it, it doesn't work. The sound feels 'cropped'; it plays extremely slow and low pitched, clearly malfunctioning.
Cubase 12 doesn't even recognize the device or the ASIO drivers for configuration.
I've been using the Toneport KB37 for music production and as a general soundcard for years, and on the old PC, it still works perfectly.
The same USB cable is being used on both PCs.
Am I missing any kind of configuration, new driver, or something that could make it work with Windows 11?
Thanks in advance for your time and help. Any kind of tip or suggestion will be extremely appreciated.
mon portable considerablement ralenti
Bonjour a vous ,
j espere que vous passez une bonne journée ?
voici mon soucis ;
j ai télécharger AVG tune up en version free car boostspeed que j ai accheté est difficile d utilisation au 1 er abord ,de plus celui ci ne s ouvrait plus et n avait pas résolu mes divers problemes de fichiers registres manquants ou corompus .
Du coup après multiples recherches sur edge ia ,ce dernier m as aimablement proposé AVG , je l ai installé et tous mes soucis ce sont résolus ;rapidité,fluidité, enfin le top .
Ce jour j ai désinstallé boostSpeed 13 et retéléchargé ,je constate un très fort ralentissement et la gestion des taches m indique une très importante influence sur les ressources du processeur ,donc j ai tenté de vérifier mes pilotes avec votre appli que j ai également achetée ,elle m indique que mon pilote processeur est obsolète mais impossible de l installé ainsi qu un autre ,je ne sais pas ci cela résoudra mon problème mais ,mon pc rame alors que sans boostspeed il est très rapide ,pourquoi s il vous plait ?
Merci a vous ,
j apprécie vos logiciels et aimerait rester avec vous avant de demander un remboursement ,ce serait domage ,
Thierry Baulon
j espere que vous passez une bonne journée ?
voici mon soucis ;
j ai télécharger AVG tune up en version free car boostspeed que j ai accheté est difficile d utilisation au 1 er abord ,de plus celui ci ne s ouvrait plus et n avait pas résolu mes divers problemes de fichiers registres manquants ou corompus .
Du coup après multiples recherches sur edge ia ,ce dernier m as aimablement proposé AVG , je l ai installé et tous mes soucis ce sont résolus ;rapidité,fluidité, enfin le top .
Ce jour j ai désinstallé boostSpeed 13 et retéléchargé ,je constate un très fort ralentissement et la gestion des taches m indique une très importante influence sur les ressources du processeur ,donc j ai tenté de vérifier mes pilotes avec votre appli que j ai également achetée ,elle m indique que mon pilote processeur est obsolète mais impossible de l installé ainsi qu un autre ,je ne sais pas ci cela résoudra mon problème mais ,mon pc rame alors que sans boostspeed il est très rapide ,pourquoi s il vous plait ?
Merci a vous ,
j apprécie vos logiciels et aimerait rester avec vous avant de demander un remboursement ,ce serait domage ,
Thierry Baulon
Touchpad Stopped Working
Can you give me possible solution methods to get my Lenovo Yoga laptop (Win 10) touchpad to start working again? I am currently using a bluetooth connected mouse with my laptop, but "out of the blue" my touchpad stopped operating. I've had this issue happen before and a re-boot corrected the issue, but not this time. Thanks.
tastatur
warum fällt die tastatur bei einem notebook von captiva gekauft 01.01..2021 komplett aus diesess schreibe ich mit der bildschirmtastatur. neupreis: 1.459,- €
CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:
inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024
CAPTIVA 43,9 cm (17.3") GB7 726IG 20V1
(PB71DDS-G) RTX 2060 6GB/FHD 144 Hz NB
WVA/i7-10750H/MC/SSD 500GB/HDD
1TB/32768/WLAN/BT/w/o OS
1 1459,00 1459,00St
201,24Umsatzsteuer 16 %
1.459,00Summe Brutto
1.459,00Endsumme
EUR
EUR
EUR
1.257,76Gesamt Netto 16 % EUR
Zahlbar per Paypal
DHL National Standard
Zahlung:
Spediteur:
Bedingungen:
inbetriebnahme im januar 2021, ausfall tastatur anfang april 2024
System is running slow
I am trying to run disk clean up & compress the file to increase space in C drive but I am getting error that some of the file is not working properly. I have to skip some of the files then I am able to compress the system files.
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7