Cannot play RDR2 through Steam
I think my game was hacked
ATOK ジャストシステム契約管理エージェント「管理のサービス」が停止になってしまう
どのように対処すればよいか。
wont install new drivers
cant install nvidia gforce and driver booster wont update my drivers ie: game drivers for windows
Certificates
Good evening,
I have an issue with my computer no longer reading the certificates when I insert my id card into a card reader on my computer. I've tested the card reader on different computers with windows 10 as well. So it's not the device or id card. I tested different card readers to no avail as well. It seems to be a softare issue that I think Austologics is blocking or something else. I've tried different browers and that also did not lead to any success.
programs as a threat
Dear Sir / Madam, I bought the programs Defrag, Register Cleaner and Bootspeed from Auslogics. With license. I am satisfied with the programs but Malwarebytes sees these programs as a threat. See picture. How can this and how can I solve this.
BoostSpeed wird permanent von Avira gelöscht
Sehr geehrte Damen und Herren,
mein Antivirusprogramm "Avira Antivirus Pro" stuft BoostSpeed permanent als Bedrohung ein und löscht es.
Gestern wurde BoostSpeed 3x gelöscht!
Hierfür hätte ich gerne eine Lösung von Ihnen erfahren.
Mit freundlichen Grüßen
Prösch
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
acronis power plan
I used to have acronis power plans available. I no longer have them. How do I install them and where do I get them? I had them a month or so ago but when I did a new install it was not availab.e\\le
Не получается запустить.
Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
Minecraft
modを使ってマイクラを楽しんでプレイしてるんですが、最近forgeを28.1.76から最新のものに変えたら、起動するんですがメニュー画面まで行かなくなりました。
どうすればいいのでしょうか？
いちおう、エラーログを添付しますので教えて下さい。お願いします。
Samsung Kies Software side by side configuration
Hi guys. I am running a brand new installation of Windows 10, and i am attempting to install Samsung Kies to sync with my Samsung Galaxy S10+ smartphone, and it says that there is a side by side configuration error.
Allow list
letters are very thin -hard to read
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
About BoostSpeed
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
BoostSpeed wipes out VS2022 install data
Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.
Please advise.
programa ya instalado
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
mistakes
auslogics boostspeed
display driver
Memory problems & Upgrade question
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
PC slows down after a period of being on, following re-boot.
After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.
I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.
Have you run into this anomoly before and/or do you have a fix for this?
Many thanks!
Browser cleanup
Auslogics - Disk Doctor (Repair)
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
of course windows 10 update assistant won't work for anybody with windows 10 version 10240
WHEN is auslogics going to create a new product designed specifically to -- F I X -- windows updates ?
Windows 10 update assistant desn't work, you can have a brand new laptop with windows 10 version 10240 and
you will NEVER be able to update to version 20H2
go online and google this famous problem yourself: '..... https://www.google.com/search?q=windows+won%27t+update+to+20H2&source=hp&ei=StRUY7SEMqaq5NoP3eG48AE&iflsig=AJiK0e8AAAAAY1TiWtOlcytSaQ4bxpid44eCLbIptM0H&ved=0ahUKEwi00cqi0vX6AhUmFVkFHd0wDh4Q4dUDCAk&uact=5&oq=windows+won%27t+update+to+20H2&gs_lcp=Cgdnd3Mtd2l6EAMyBQgAEIAEMgYIABAWEB4yBggAEBYQHjIGCAAQFhAeMgYIABAWEB4yBggAEBYQHjIFCAAQhgMyBQgAEIYDOhEILhCPARCPARDqAhCMAxDlAjoRCAAQjwEQjwEQ6gIQjAMQ5QI6CwgAEIAEELEDEIMBOgsILhCABBCxAxCDAToRCC4QgAQQsQMQgwEQxwEQ0QM6DgguEIAEELEDEMcBENEDOggILhCxAxCDAToICAAQsQMQgwE6CAgAEIAEELEDOgUILhCABDoICC4QgAQQsQM6CwguELEDEMcBENEDOg4IABCABBCxAxCDARDJAzoLCC4QgAQQxwEQrwE6DgguELEDEIMBEMcBENEDOg4ILhCABBCxAxDHARCvAToLCC4QgAQQxwEQ0QM6CAgAEBYQHhAKUKbjAViXtwJgyIEDaAJwAHgAgAGBA4gBuxuSAQkxMC4xNi4xLjGYAQCgAQGwAQo&sclient=gws-wiz ......'
Anyways, i'm sure if you auslogics geniuses could create a product that would diagnose te installed Windows 10 -- even
a FRESHLY INSTALLED COPY - and then figure out how to FIX WINDOWS 10 UPDATE it would be great
everytime, i've used windows assistant or used their diseased updare system, my brand new lapop automatically
UN-INSTALLSthe 'update' upon reboot.
good luck, you have a winner on your hands should you FIX the hateful microsoft update problem
really, windows and microsoft SUCK as bad as mscintosh/apple and Their endless built-in-obsolete operating systems
for now ? i've DISABLED all windows updates except for DEFENDER updates every 48 hours
sincerely
lynnpokemonojeff (i will NEVER AGAIN attemptto 'update' my windows 10 version 10240
Cartel que aparece cada vez que enciendo la CPU.
Boost Speed
Please advise.
suppression des fichiers en double (copies)
Quelle est la marche à suivre ?
merci de votre aide
André
Intel Graphics Installer Not Prompt Back After Loading For Install
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb