390 questions
Boost speed does not recognise pro
I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
Colin Summerfield
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
Content hidden to protect privacy
administrator blocked auslogics
I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.
Kind Regards,
Michael Figueroa
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
Hallo,
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
ホルダーが「空」になる
ｂｏｏｓｔＳｐｅｅｄ12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、（Ｄ）に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Content hidden to protect privacy
Making best use of the high system resource usage detected warning
Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
windows search
I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
外付けHDDのデーター復元
Auslogics bootSpeed 12のマイタスクの項目を処理したら、外付けHDDのデーターが消去されてしまいました。あまり画面を見ず、いいかげんに処理してしまいました。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
New download won't run
I downloaded the suggested new Auslogics Disk Defrag 11. Now it won't run. It says "The execution cannot proceed because AxComponetsVCL.bpl was not found. Reinstalling the program may fix this problem".
Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?
How do I get back to the Defrag that worked?
Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?
How do I get back to the Defrag that worked?
Recherche de logiciel
Quels logiciel gratuit me conseillez-vous pour rendre mon PC plus performant rapide et un bureau attrayant
Autodesk Software
i had installed Autodesk Software on my computer and it didnt install well due to licence patching. I unistalled the software and tried to reinstall but the software wouldnt install.
i then purchased Auslogics Boostspeed 13 with the hope thta it will help me with removing all possible traces of the software but its not helping
i then purchased Auslogics Boostspeed 13 with the hope thta it will help me with removing all possible traces of the software but its not helping
Optimización de la memotria Ram
Hola, me pueden ayudar a configurar la optimización de la memotria Ram de mi PC con BootSpeed 13?
Gracias
Gracias
Why have I never received my paid for PRO edition
I paid for the PRO Edition some time ago it would NEVER LOAD so I have been using the FREE Version
WHERE IS MY PRO ONE THAT I PAID FOR AND NEVER RECEIVED?
i HAVE EMAILD BEFORE WITH NO ANSWER
So I just gave up!!!!!!!!!!!!!!!!!!!!!
The activation file sent never worked
Product Name: Duplicate File Finder - 6.3.0.0
Reference Id: ASH150723-5799-45167
Machine Name: DESKTOP-P617G0M
Machine Id: E30CFD250369631872E7B03DD54A099F
Google Activation Code HWSJAZO7WWUK2WDPFCMW6HOU2MBRXBVK
WHERE IS MY PRO ONE THAT I PAID FOR AND NEVER RECEIVED?
i HAVE EMAILD BEFORE WITH NO ANSWER
So I just gave up!!!!!!!!!!!!!!!!!!!!!
The activation file sent never worked
Product Name: Duplicate File Finder - 6.3.0.0
Reference Id: ASH150723-5799-45167
Machine Name: DESKTOP-P617G0M
Machine Id: E30CFD250369631872E7B03DD54A099F
Google Activation Code HWSJAZO7WWUK2WDPFCMW6HOU2MBRXBVK
Eliminate Popups
What software is recommended to eliminate popups on my PC. The popups are not from programs on my PC.
Auslogics BoostSpeed extrem langsam
Nach dem scan mit BoostSpeed 13 starte ich die Auflösung.
Das läuft anfangs noch ganz gut bis es zu den Browserspuren kommt.
Dann werden die etwa 300000 gefundenen Spuren im Sekundentakt heruntergezählt. Nach mehreren Stunden Laufzeit wird das zunehmend langsamer.
Ich muss dann abbrechen sonst wird das nie fertig.
Mache ich da etwas falsch oder ist das ein Software Problem?
Grüße
Dieter Krause
Das läuft anfangs noch ganz gut bis es zu den Browserspuren kommt.
Dann werden die etwa 300000 gefundenen Spuren im Sekundentakt heruntergezählt. Nach mehreren Stunden Laufzeit wird das zunehmend langsamer.
Ich muss dann abbrechen sonst wird das nie fertig.
Mache ich da etwas falsch oder ist das ein Software Problem?
Grüße
Dieter Krause
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7