372 questions
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
fenetre d'erreur dans messagerie
Bonjour,
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
Ma messagerie Thunderbird (plusieurs comptes actifs) semble fonctionner correctement, mais depuis quelques semaines s'ouvre une fenêtre d'erreur (en pièce jointe) dont je n'arrive pas à supprimer la cause.
Pourriez-vous m'aider ?
Merci d'avance, cordialement.
Denis LO JACOMO
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
Looking For a Software Replacement
I am looking for software that will replace at least all of the features of McAfe Life Sale and some. Do you have a software program(s) that will do this and if so what are they and how much do they cost?
Auslogics Bitreplica vs
Dear Auslogics Team,
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Please, tell me: can I use Auslogics Bitreplica to create the full system and disk images?
Thank you.
With regards.
Richard.
Intergrate software/APPS
I have 2 dictionary appsw on my comp[uter/desktop. But I can't seem to get them on WORD, a microsoft program. Do I have to add them as an ADD-ON?
Gerenciador de dispositivos
Quria programar a hora da luminusidade do écran mas não consigo, poderá ter sido da desfragmentação?
Boost speed upgrade to 13
HI
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
I can not finde where to put in the my license key for the new upgrade to 13. I do hve the new license key it downloaded okay
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
Auslogics Boost Speed registration
Hi. Could you tell me how many years is the access to Boost Speed if I purchase a key. I tried to find out if it is life time cost or one year. Your advertisement does not seem to give this information. Thank you. Paul.
driver opdater
will your driver updater get the driver for my printer and install
printer is hp deskjet f4100 seris
printer is hp deskjet f4100 seris
Auslogics Boostspeed 12 problem
When I try to use the Boostspeed 12 "Maintain" tab and do a SCAN, I get a message popping up stating that it is "checking fragmentation on my F: Drive.
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
It should be checking fragmentation on my C: Drive. I do not want it to do anything with my F: Drive.
How do I get the SCAN to switch drives?
SurfShark VPN problem with DNS wire???? with BS and Surfshark .3.0
Hi,let say I like your software very much. Please show me how to end error message form BS "interupted DNS" from Surfshark
window defender
my window defender Virus & threat protection is taken over by kypersky internet security. Can you get back my window defender if i buy pro.
problem with auslogics
It wont let me create a restore point, and the restore points I had created it has deleted.
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
ошибка какая-то
Переодически выдает ошибку, я так понимаю это связанно с каким-то файлом отвечающим за обновление Майкрософт Офиса. Появляется не так, чтобы часто. Может 1 раз при перезапуске компьютера. Как это можно было бы убрать? Переустановить офис, наверное...
Pro version ?
Noticed my Boostspeed progaram has the activate pro version on the bottom of the screen when i have already registered it.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Plus the last time i used driver updater it updated my pc then restarted it and it would not boot up no matter what i tried, I then had to reinstall windows with a backup. not used driver updater since.
Thank You.
Bootspeed 13
I recently received an emil in regards to Bootspeed 13, unfortuanatly I didnt follow it up because of Covid, now that I am better I would like to put my name down for ithe upgrade.
kind regards chris moore
kind regards chris moore
question about WIN10 servises
how can I stop the unnecessary servises in windows10? without harming to my divice or OS.
Could not activated my license
I have bought the pro license at July 2021 and used this software until mid of january. Suddenly the software ask me again for license code, and after I input my code, the software still on free version mode and not changed to PRO version. Please assist me regarding this problem
проблема с регистрацией
Купил лицензию на ABSpeed 26-го июля 2021 года. Действительна ещё 181 день.
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
До недавнего времени проблем не возникало. Последние несколько дней слетает активация, каждый раз при открытии программы предлагает активировать ПРО версию, после ввода ключа выскакивает окно, говорящее, что программа активировани, версия ПРО, но в самой программе никаких изменений нет, кнопка "Активировать ПРО" не исчезает, и в "помощи" ропять то же самое. Что делать, как решить проблему?
Unable to Install the new Auslogic Boostspeed 13.0.0.1 update
Hi
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
I have downloaded and installed the Boostspeed update (13.0.0.1), but the installed virsion indicated by the Help>About shows 13.0.0.0
I need further instructions to properly install the new update.
ソフトを起動しようとすると保護がかかってしまいます。
Auslogics BoostSpeed 12をしようしていますが、最近になってソフトを起動しようとすると下記のメッセージが表示されます。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
「ユーザーアカウント制御
このアプリは保護のためブロックされました」
対処方法をご教示ください。
windowsの立ち上がり時間の表示設定
貴社のBoostSpeed12Proを使用していますが、ｐｃ電源ＯＮからwindowsソフトが立ち上がる迄の時間表示の設定手順を 教えて下さい ・・・宜しくお願い致します。。。
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7