372 questions

Управление программой

Как на накоторое время отключить программу AuslogicsBoostSpeed 13
371 views
May 21, 2023 at 02:34 PM

Empty folder program freezing up

Hello there. First time asking for assistance. The AB13 Suite works great except for the empty folder program which freezes up on both computers here at the office. Whole program then does. What now? Thanks....

Paul


351 views
May 16, 2023 at 11:36 AM

Versione Auslogics BoostSpeed 13

Gentile Auslogics, vi chiedo cortesemente se è prevista la possibilità di provare la versione Pro di BoostSpeed anche solo per 24 ore. Grazie e cordiali saluti
356 views
Apr 29, 2023 at 10:40 AM

BoostSpeed11でスキャン、不具合解決をするとGoogleDriveが終了する

お世話になります。
BoostSpeed11のダッシュボードからスキャン、表示された問題を解決すると、インストールされている「GoogleDrive」が終了します。

割り当ててある仮想ドライブも消え、タスクバーのアイコンも消えてGoogleDriveが機能しません。GoogleDriveの再起動も出来ません。
GoogleDriveが終了した時点でGoogleDriveアプリのプログラム自体は削除されないので、
コントロールパネル、プログラムと機能から削除→再起動→ログイン→再インストールが必要になります。

GoogleDriveのインストールフォルダや関連すると思われるレジストリをスキャン対象から除外しましたが、この問題は解決しません。

何か良い方法があれば教えて下さい。
以上、よろしくお願いします。

366 views
Apr 25, 2023 at 02:44 AM

Clearing Privacy History issues

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?
410 views
Apr 24, 2023 at 01:11 PM

BoostSpeed 13 Ansehen der Ergebnisse

Warum kann ich bei BoostSpeed die Ergebnisse nicht lesen? Sowie ich auf "Die Reparatur abgeschlossen. Klicken Sioe hier um die Ergebnisse anzusehen" drücke, verschwindet alles. Ich konne bishe keine Ergenisse mir ansehen.
Im Voraus vielen Dank!!

Regards Hans
353 views
Apr 23, 2023 at 09:44 AM

chrome

my chrome video is not working
336 views
Apr 15, 2023 at 05:49 AM

Licence Auslogics

Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
331 views
Apr 14, 2023 at 09:49 AM

slow start

Bootspeed is very slow to open on my pc.
343 views
Apr 05, 2023 at 02:53 PM

BoostSpeed reading errors

On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
338 views
Apr 05, 2023 at 12:18 PM

Where to find the Optimize Tab

In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
314 views
Apr 04, 2023 at 04:14 AM

How do I correct index entry errors?

How do I correct index entry errors?
379 views
Apr 03, 2023 at 05:58 PM

upgrade

do i need an upgrade for home use only
319 views
Apr 01, 2023 at 08:59 AM

вопрос

почему не работает
337 views
Mar 28, 2023 at 04:48 PM

Defrag external usb drive?

Hello,

How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.

Thanks,
joshua
342 views
Mar 17, 2023 at 07:31 AM

Auslogics - Disk Doctor (Repair)

Hello Sir/Madam.

As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.

For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.

My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.

Regards,

Pietro Di Zanno
463 views
Mar 15, 2023 at 04:35 AM

Auslogics scans

I have been using Auslogics for seceral years now. My question is how long do the results of a scan last. I have noticed for instance that the internet settings hold goo,. the scan in clean-up are good and then the next day they must be deleted again. Does a reboot erase some of youy clean-up for tha same day? Just curious. Any info would be helpfil. Thanks.
387 views
Mar 14, 2023 at 08:36 PM

Registry Cleaner

Hallo Auslogics Team ! Ich hatte mir vor Boostspeed 13 Pro den Auslogics Registry Cleaner Professinal gekauft !
Meine Frage...Sind diese beiden Produktversionen identisch bzw.funktionsgleich ?
Würde mich über schnelle Rückmeldung freuen!
Mit freundlichen Grüßen Klaus Ratje
358 views
Mar 14, 2023 at 01:36 PM

Disk Defrag 11 - Wipe disk blank area function reports 100%, but doesn't actually finish

I know that wiping a large HD can take time, but it reached 100%, the program never repotred it finished. I let it continue to run nearly 12 hours after it reached the 99-100% point. I couldnt close the program either, so I restarted the PC in order to close the program. Dell Percision T3500, 24GB RAM, 8 core Xeon W3540, Win10 x64 on SSD. Everything else runs well. I'm using the paid version of Disk Defrag 11.
360 views
Mar 13, 2023 at 11:13 PM

何回cleanningをおこなってもデフラグや調整項目がある

PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
454 views
Nov 27, 2022 at 09:49 AM

Removing all traces of google from windows

Is there an efficient way of removing all things (every mention of) Google from my sysem, preferably using your products?

In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
453 views
Jun 04, 2022 at 02:26 PM

New Problem Notifiction

Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
449 views
Nov 27, 2022 at 08:25 PM

Notices

I am the target of a very vicious hacker. A short time ago I receieved a notice from Auslogics of a new file that had recently been added into my system. I checked to understand more, then deleted it. However, I was lucky to see this notice. If I am away from my desk and a notice pops up I may miss it. How can I keep track of notices you send so I can circumvent any threats?
448 views
Dec 29, 2022 at 12:17 AM

le van hoa

sao khong kich hoat kye duoc
445 views
Dec 31, 2022 at 09:21 PM

SYSTEM SCAN

I have boostspeed 13 Pro. When I do a system scan, the results come back so many mb deframented, etc. But when I resolve, it only clean sonme of them. Maybe 10 mb less. It cleans less on defrag and junk. If i scan again, it cleans all. Why should I have to do it twice? Also, can I set up system scan to be automatically done? And if I can, how do I do it? Please advise.

Thank You,

Doug
gambichler5@aol.com
440 views
Dec 15, 2022 at 09:38 PM

Slow startup

Good day, old person here.....

I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.

Patience and any help offered would be much appreciated!

Thanks & regards
Jacqueline Collier
438 views
Dec 27, 2022 at 09:45 AM

BoostSpeed 13 BUG Issue

There is an aggravating "BUG" in BoostSpeed 13. A message frequently appears that states I have many TERABYTES of files in my Recycle Bin. See the attached screenshot.

I got this message today, while having less than 25 MB of files in my Recycle Bin.

Please look into this and fix this BUG.

Thank you.

Myron Achtman

Content hidden to protect privacy

437 views
Feb 25, 2023 at 07:12 PM

作業終了時に下記内容が表示されます

作業終了時に下記内容が表示されます
「いくつかの調整を有効にするため、コンピュ-タを再起動するする必要があります。」
どうすれば、改善するのですか。
424 views
Feb 21, 2023 at 07:13 AM

UPDATE

Hi.
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?

Thanks
422 views
Dec 11, 2022 at 04:04 PM

icon in system tray

auslogics tray icon has an x through it. why?
414 views
Oct 17, 2022 at 05:02 AM

automatic

bonjour je aimerais automatic maintenance fasse registry cleaner
413 views
Dec 15, 2022 at 08:15 PM

Intel Graphics Installer Not Prompt Back After Loading For Install

Dear Sir /Madam,

I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
413 views
Aug 31, 2023 at 02:54 AM

Bluetooth driver

When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
413 views
Sep 26, 2022 at 03:40 AM

My ETS5 still crashes

My ETS5 still crashes upon opening. Is there some function in the registry cleaner that I have overlooked?
413 views
Oct 03, 2022 at 10:37 AM

Auslogic 13 update problem

Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
412 views
Nov 29, 2022 at 10:53 PM

Angy Birds

Wie bekomme ich Hyper V auf Lenovo ThinkCentre MT-M9622-CTO
412 views
Dec 06, 2022 at 03:31 PM

Clearing Privacy History issues

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?
410 views
Apr 24, 2023 at 01:11 PM

System Tray Icon Never Loads

I recently purchased Auslogics BoostSpeed 12 and I’m running it on Windows 10 VM, the user is a Standard user without any Administrative Privileges. This brings me to the question! Can this Standard user turn on the computer and BoostSpeed 12 loads and runs automatically including scheduled maintenance?
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?
409 views
Oct 28, 2022 at 09:51 PM

Never updates any drivers for two years now...

I do NOT want to uninstall Driver Updater. I want it to work and it has never updated a single driver, yet.
408 views
Dec 15, 2022 at 02:57 PM