376 questions
Question about All my 'Subscriptions?
I have an important Question regarding with my 'Subscriptions: 1 Question: After an Year time are All my 'Subscriptions with Auslogics will Renew Automatically?...or After an Year time when my subscriptions will gonna expire should I buy New Licenses for all my Subcriptions again, I mean do i need to do it manually?again? Please Let me know? thanks!
Vos logiciels
Quel utilité et quelle différence (avant de passer ma commande) entre Auslogics BoostSpeed13 et Discdefrag?
Je ne sais que choisir vraiment..
Je ne sais que choisir vraiment..
Privacy Leaks
Boost Speed 13* has been sending me the message that I have "Potential privacy leaks detected - . . . . some Windows settings are enabled to share your private information"
How do I find the Windows settings and disable them?????
How do I find the Windows settings and disable them?????
email tutorial
When I first used BoostSpeed there was an emailed tutorial/teaching program that was very informaive. Is there still such a thing and how do I access it?
Recording locks up.
Sometimes a pop-up behind a screen that I am unaware of, like BoostSpeed, will render an application or camera immobile. How do I keep pop ups from happening? What can I do?
upgraging lost my registered status
Hi,
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
I upgraded my computer with a different motherboard, a new i7 cpu and new ddr4 memory, but my hard drives, my graphics card and sound card plus power supply are still the same. When I turned on my computer I see that my status went from registered to unregistered. How do I get it to be registered again. It's not a different computer, just upgraded.
Thanks,
Chris K.
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
installation logiciel
Bonjour, je n'arrive pas à installer un Logiciel , j'ai une erreur 1720 de windows installer
Saved on PC Email
A long time ago I had AOL (not Gold) & I couldn't transfer the Saved on PC mail to Gold. My Question is: Can your File Recovery Software recover that mail from my hard drive?
SSD
I am using an SSD and read that you should not defrag them.
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
Is it ok to use your program to do this, is says 9.9 % fragmented?
Thanks
How to avoid file delete problems in Lightroom Classic
Lightroom creates catalog images and movg es file around as you manage the catalog and/or import files from various devices or drives. How can I avoid LR catalog issues when using Aslogics software?
Fading icon
Hello and thank you for your hardwork
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
when I open Microsoft store and the apps i download from it, they open and work fine but their icon in taskbar is fading away.
I repair and reset the Microsoft store but it didnt work.
stringa di ricerca
Buongiorno, ho eseguito una ricerca per stirnga e non ho ottenuto risultati, ho eseguito la stessa ricerca con regedit e sono uscite diverse voci di registro, come mai?
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
Cosa devo fare per ottenere questi risultati con la vostra app e per cancellarli senza cercarli e selezionarli uno ad uno con regedit?
Grazie.
Driver Updater on Win 11 platform
My laptop uses Win11 OS. I get notices that several drivers need update. I start Driver Updater. Shortly later I am notified Driver Updater cannot connect to sever. This only happens on Win 11,
James Denneny
James Denneny
Delete/clean norton
Why won't Auslogics BoostSpeed clean norton during a scan. We really like your product but don't want lingering files from Norton when it's not being used.
John Smith
John Smith
Actualizaciónes
¿Siempre es mejor actualizar todo el software (windows, sistema operativo, apps, drivers, etc.) a la versión más reciente que se vaya publicando? o cuando todo está funcionando en forma correcta ¿es mejor detener las actualizaciones para dejar todo como está y que se mantenga todo funcionando en forma adecuada?
ralentissement
Bonjour, je rencontre un ralentissement limitant l'usage de Google Drive. Les affichages sont très longs, les échanges de contenus encore plus...
Je l'ai réinstallé, sans succès.
Je l'ai réinstallé, sans succès.
何回cleanningをおこなってもデフラグや調整項目がある
PCのクリーンアップを目指してscanを行っていますが、何回行ってもデフラグや調整項目が表示されます。
PCのどこかに、基本的な問題点があるのか心配しています。
PCのどこかに、基本的な問題点があるのか心配しています。
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
Removing all traces of google from windows
Is there an efficient way of removing all things (every mention of) Google from my sysem, preferably using your products?
In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
In the pase I have gone through the registry line-by-line and removed anything that says "Google," "Chrome," or "android." this takes a long time and is teadious but I am usually successful in keeping Google out of my life.
Notices
I am the target of a very vicious hacker. A short time ago I receieved a notice from Auslogics of a new file that had recently been added into my system. I checked to understand more, then deleted it. However, I was lucky to see this notice. If I am away from my desk and a notice pops up I may miss it. How can I keep track of notices you send so I can circumvent any threats?
SYSTEM SCAN
I have boostspeed 13 Pro. When I do a system scan, the results come back so many mb deframented, etc. But when I resolve, it only clean sonme of them. Maybe 10 mb less. It cleans less on defrag and junk. If i scan again, it cleans all. Why should I have to do it twice? Also, can I set up system scan to be automatically done? And if I can, how do I do it? Please advise.
Thank You,
Doug
gambichler5@aol.com
Thank You,
Doug
gambichler5@aol.com
Slow startup
Good day, old person here.....
I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.
Patience and any help offered would be much appreciated!
Thanks & regards
Jacqueline Collier
I am using Windows 10, do I need both Google Chrome AND Microsoft Edge? I sometimes receive a message from Auslogics saying I may have a privacy issue and that I should look at my privacy settings... but as there is no indication of what the privacy setting should be or what has changed, I don't know what I am supposed to be checking.
Patience and any help offered would be much appreciated!
Thanks & regards
Jacqueline Collier
Clearing Privacy History issues
Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.
the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.
Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).
What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.
Cool?
UPDATE
Hi.
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
When I see the mesage in my laptop: " You can upgrade" to 13.0.0.2. Visit our web page.
I go to this web and I download the file that you have there.
I install this file, but I can't have the new version.
Could you guys help me?
Thanks
Intel Graphics Installer Not Prompt Back After Loading For Install
Dear Sir /Madam,
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
I'm facing Intel Graphics Installer not prompt back after loading for continue install start on version Driver 31.0.101.4644 WHQL. Need some advice what when wrong and how to resolve.
Bluetooth driver
When I bought this I ran a scan and was using my wireless mouse after the scan I was unable to use my mouse. Would this software delete my driver if so how would I get it back?
My ETS5 still crashes
My ETS5 still crashes upon opening. Is there some function in the registry cleaner that I have overlooked?
After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.
Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
Auslogic 13 update problem
Trying to update the new version from 13.0.0.1 to 13.0.0.2 - updater stating that Auslogic 13 is running and it will shut down program and proceed with update - this goes on and doesn't work
System Tray Icon Never Loads
I recently purchased Auslogics BoostSpeed 12 and I’m running it on Windows 10 VM, the user is a Standard user without any Administrative Privileges. This brings me to the question! Can this Standard user turn on the computer and BoostSpeed 12 loads and runs automatically including scheduled maintenance?
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?
It looks as though all is fine until I restart the computer however, it’s not, the system tray icon never loads until I start the application manually, and before it loads an administrative Password is required. Is this normal and If so is there a workaround?