Uninstall
It's not in/on my programs list to uninstall.
Thank you
Ronald Cloud
Architecture X64 Auslogiscs
Best regards,
Doniel H.
False alarms
Any comment on this issue would be appreciated.
I made a .nfo file, but I cannot attach this file to this request form.
Windows Event Viewer and Auslogics BoostSpeed 12
It is not a hardware issue as I have 32G Ram with an Intel i7. I check the Windows Event Viewer and persistently see issues with the "Cloud Files Diagnostic Event Listener", and the application-specific permission settings in COM Server Application.
Is there a way (or a tool in Auslogics) to use the info I find in the WIndows Viewer to address these or any other issues? Is there a Windows Event Viewer diagnostic tool I am unaware of? Am I barking up the wrong tree in using Windows Event Viewer and the real issue is elsewhere and there's a better way to identify the issue?
I am only associating the freezes with these issues because they usually occur right before Critical Error freeze occurs.
Help! And thanks.
when right click in file explorer, it load very slow
REQUEST AS IN YESTERDAY.
Reason I'm asking this, I'm broke.
Contex menu delay on desktop shortcuts and explorer folders
I have uninstalled cortana, disabled all contex menu options with this program, and checked and repaired all regestery items. I don't have any idea what else to do. I use the right mouse click a lot and when the delay happens it is very disruptive to workflow.
Removal of leftover files and registry entries after uninstall. (crashplan)
letters are very thin -hard to read
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
Windows 10 Pro Licencia Retail - No actualiza versión 21H2 - Error 0x800f0922
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.
Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.
Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.
Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.
Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
いつもエラーが出て困っていて、このソフトで解消できるようになりませんか?
エラー:(STATUS_WAIT_2 (0x80070002))
バックアップとるとこのエラーが出てバックアップに支障が出ています
どうにかなりませんでしょうか?
ネットで調べてもこれと言って解決策が見つかりません
このエラーがこのソフトで解消できるようになればよいのですが
よろしくお願いします
Defrag Ultimate
Is there any benefit in having Defrag Ultimate? Boostspeed 12 includes defrag. Can Defrag Ultimate do anything the defrag in Boostspeed can't do?
Is Defrag Ultimate only intended to be used with Boostspeed 11, and earlier versions of Boostspeed?
Thank you.
transferring data and Auslogics
Hi. This may be out of your field, but...
I am relaunching a small nonprofit. Part of the process is transferring files from a worn out laptop (using now) to a newer refurbished one. I'm using the free version of Auslogics Speed to clean up the old laptop before transferring data to new. We will be subscribing to the paid version for the newer laptop after I get the transfer done.
In the past, I've had to have someone transfer data using specific cables. Is there an Auslogics or other software that can be used to do the transfer without hardwiring? Novice here techwise. And, it's always been my experience that no matter how successful the data transfer, the folder and files have to be manually reconstructed. A work-around would be great.
I need t leave home now but will return about 4:30 Pacific. Yes, I know that's asking a lot, so I appreciate whatever you can share about the challenges I'm facing.
Onward,
Will Anderson
greenvegans.org
BoostSpeed wipes out VS2022 install data
Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.
Please advise.
doublons
Bonjour , existe-t-il un logiciel (facile) , pour éliminer tous les doublons automatiquement ( sans cocher toutes les cases de tous les doublons ) . Merci , cordialement
High System Usage
What emptied by downloads folder
Windows 10 not shutting down, keeps restarting
I have tried a few "fixes", e.g.
In Startup and recovery, used "Restart" for clean start,
Start in "Safe Mode",
Untick "Automatic restart",
Removed or substituted all devices, hard drives plus mouse and keyboard, even monitor and RAM, except Graphics card - no fix. Defragged and scanned hard drives for errors.
Pressed power button with power disconnected.
Re-installed Windows and updated.
All fans and heatsinks not clogged with dust.
Edited Registry = "No Auto Reboot With Logged On User"!
I have recent system images saved but none before the problem started!
Any suggestions? Thank you, David
Problems with Windows Update-Valentin Batalak
I had some problems installing Win 10 updates. The problem keeps recurring and I would like information from your support.
You may find this error code helpful: (0x80080005), which is the message that keeps popping up:
The device is missing important security and quality patches!
Regards,
Valentin Batalak
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Pro Version
Re-enable the Windows key on the keyboard
Error 1605 and 1628
I am facing problem about error 1628 and 1605,can you help me to solve this problem?
WordPad problem
Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.
Regards
Henning Reckey
Не получается запустить.
Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)
Internet Explorer re install
Bonjour !
J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows
Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?
J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.
Merci !
Sylvain
PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative
原因不明起動しない
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する(チカチカ。。。正常)
1分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる(現在のように)
上記の状態が前触れもなく発生する
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Windows Security - Account Protection
"Dynamic Lock is not working because Bluetooth is off."
I do not know what device to try to turn on to Bluetooth.
Thanks in anticipation.
Mike Kemp
Mobile:
гибернация
Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
NVIDIA 제어판이 안 켜져요
NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?
Richiesta di un consiglio
Buongiorno,
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
oppure
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
UsoClient
Hello Auslogics
It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.
No doubt this is a Windows thing, but it would be good to understand what is going on here.
Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).
If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?
Thanks and regards
Phil Parkin
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
Please advise
Jessica