57 questions
EL PROGRAMA TIENE ALGUNA FUNCION PARA DEJAR WIN 11 COMO ESTABA POR DEFECTO
TODAS LAS TAREAS PRIMARIAS Y SECUNDARIAS, ETC... HAY ALGUNA FORMA DE DEJARLO COMO VIENE WINDOWS 11 POR DEFECTO
Getting different kinds of BSOD's
Hello and good morning, I'm not very good at softwares and know-how's on PC but I've tried using this program to probably fix the cause of what could be causing the BSOD's on my PC. After I tried to use the Auslogics Driver Updater, I updated some of the drivers and it asked me to restart so I did. After I restarted, the pc kept giving me a BSOD where it was written something like: Boot device inaccessible. So I couldn't even put the password and login properly. I had to restore the data to a certain point so I could get my pc back. I'm not sure what the problem is yet so I decided to write this message to you and ask for a helping hand.
Thank you in advance for your time,
Pedro
Thank you in advance for your time,
Pedro
you tube videos and notifications
I have installed different search engines and cancelled all mmy cookie permissions now you tube videos wont play and iam not getting notifications anymore?
G-HUB
Since I updated the USB driver my G-HUB with logitech dosn't recognice my keyboard or mouse. What shall I do?
Bricked my HP Evo Prod ID 669a1ua after driver update
So I'm old-school (DOS Win 3.11) computer-savvy...but not much more (never heard of secure boot/TPM/Bitlocker - until I used your program to update a bunch of drivers (probabally the BIOS) and I got BSOD demanding Bitlocker key and after 3 days found no darn way around it. Finally went to HP Cloud recovery (supposed to resture factory config) but this tool does not work for me (gets stuck in a boot loop...internet search did not reveal fix/work-around that I haddn't tried; i.e at the BIOS I turned off Secure boot, allowed USB Boot, made that the first boot device...even tried re-directing the boot loader to the flash drive...but I digress).
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
Only thing left seemed to be a clean install using flash drive media from MS website to download installer for W11 and then het drivers from HP. So...Flash installer W11 called-up a view of the diskpart showing X: as "System" with like 200MB, C: is the main partition with ~433GB and is BITLOCKED... and then there is a small Recovery partition.
So the only partition I might use was the Bitlocked one...thus I had to delete it and ReFormat to do the clean install.
...So far so good!
Now I go top HP and get my wlan drivers...install from recovery CMD using pnpuil...and I fire-up Windows.
I get the intro screen to select my language, then keyboard, then it hangs at "lets get you connected to the internet"
so - TWO questions: (1) what othe (critical) drivers might I need to get online? Here's the list of possibilities: https://support.hp.com/us-en/drivers/selfservice/closure/hp-spectre-x360-16-inch-2-in-1-laptop-pc-16-f1000/2101006126/model/2101006145 and
(2) I tried just installing "all" of the available drivers...but I ran out of room???
It seems that even when I'm at he C:\ prompt - everything I install actually goes to the X: partition [which has run out of space now...] Is there some kind of start-up initialization pointer thats redirrecting "System" traffic/commands to X: (instead of c:\Windows\System\System32 - where drivers usually reside?
- If so - how do I change it?
- If not then might it relate somehow to the fact that I never really "completed" the install process?
Also FYI - now that I have gotten around Bitlocker I tried the HP Cloud recovery again and got the same blind boot loop.
Thanks for your help
-Adam
MAPPING USB PORTS TO COM PORTS
Im having trouble with not enough COM Ports for external, USB devices.
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
With only 1 Si Labs Enhanced and Standard port, and 1 port for the system, as seen in Device Manage, how can I run, for example, more than one sftwr program - intended for a Ham radio transceiver - plus an external, USB microphone plus other external HDD, with or without an external USB Hub?
Why does my HP All-in-one, WIN11 system, work with the internal camera but NOT the internal microphone?
Do I need "virtual ports"? Do I need special drivers and/or hardware?
Thanks.
Phil
Microsoft activation request when there is already validated OEM version on laptop
How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
Startup Applications Automatically Getting Disabled
Startup Applications Automatically Getting Disabled. They are enabled in the startup in Task Manager and then disabled when I restart the computer. How can I fix this?
Ошибка драйвера
Пожалуйста, подскажите к чему может привести следующая ошибка и можно ли её исправить. ОС Windows 10.
Ошибка драйвера устройства "Intel(R) Management Engine Interface" (вложение файл 1). Запуск этого устройства невозможен (код 10). Аналогичный статус этого устройства показывает Auslogics BoostSpeed 12.
Переустановка драйвера средствами Windows ситуацию не изменила.
Программа Auslogics Driver Updater определила, что все драйверы актуальны (вложение файл 2).
Ошибка драйвера устройства "Intel(R) Management Engine Interface" (вложение файл 1). Запуск этого устройства невозможен (код 10). Аналогичный статус этого устройства показывает Auslogics BoostSpeed 12.
Переустановка драйвера средствами Windows ситуацию не изменила.
Программа Auslogics Driver Updater определила, что все драйверы актуальны (вложение файл 2).
Windows Blue Screens
Hey,
Im getting a lot of windows blue screens, Kernel issues and Server exceptions and memory as well, i did a lot of testings like memory testings, when i do windows file check, when i run CHKDSK check in cmd i get files are NTFS error, Any help?
mise a jour de fonctionalité vers windows 10 version 20H2 bloque a 61%
Bonjour,
Je veux desinstalle Conexant Smart Audio HD qui est supposé creer ce probleme.
Le désinstalleur de Boostspeed ne le troive pas.
POurriez vous me donner une suggestion?
Merci
Cordialement.
Je veux desinstalle Conexant Smart Audio HD qui est supposé creer ce probleme.
Le désinstalleur de Boostspeed ne le troive pas.
POurriez vous me donner une suggestion?
Merci
Cordialement.
О USB портах
Уважаемые форумчане!
Постоянно становятся неактивными два USBпорта. Помогает только переустановка Windows.
Неужели нет другого решеия?
No me deja instalar programas pues este me devuelve una referencia
Lo que sucede es que anterior mente mi computador no le servia el programa Word y pues yo lo desintale y al intentar eliminar mis archivos para volver lo a instalar eliminar, quizas algunos archivos necesarios para Windows, pero el probrema llego en realidad, cuan al intentar instalar de nuevo el office,este se daño, y me dice que Windows ha devuelto una referencia, y asi con todos lo programas, e incluso me desactivo varia aplicaciones, es decir, este no deja instalar programas
Intermittent PC Crashes/Freezes
To Whom It May Concern,
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
I intiated my original correspondence on the 5th November as indicated below:
I, now, upload the Event View Log, in the hope this will assist you in resolving this issue. Many thanks. As an aside, I think there should, also, be an option to 'Add File' from my account page. Instead, I am obligated to intiate another question to include this file and this should not be the case, when it is part of the same, initial, question.
This is a bit ridiculous. I am asked to create a log from the Event Viewer which is 'saved as' a .evtx file and now I cannot add it! Neither can I add it in a format that is recognised by Auslogics! Wow! Really, really helpful - Not!
I await an update at your earliest available opportunity.
Kind regards,
Ian
Ian R. W
Dear Ian,
Thank you for posting your question on our forum.
The easiest way to solve the issue is to uninstall the program that creates this error or contact their support.
Often, such errors are created by hacked software or bugs in software that can only be solved by their developers.
Running the command "sfc / scannow" in CMD under the admin might help with the issue.
You can also send to our support logs with system information and event viewer so that we can better understand the issue.
To get the system information report press Start -> Run, type in MSINFO32 and press the Enter button. Save the report using the File -> Save menu option.
To get logs from event viewer, please do the following:
1. Press the key combination "Windows" + "X"
2. Select "Event Viewer"
3. Expand the "Custom Viewer" subsection
4. Select "Administrative Events"
5. Expand the "Action" menu
6. Click on "Save all events in custom view as ..."
7. Save log to PC
If you need any further assistance or have any other questions, please do not hesitate to contact us.
Upvote (0)
Ian W
Edited 7 days ago
Waiting for moderation
Dear Suzanna,
Your prompt response to my request for technical support is very much appreciated.
Further to your recommendations I have now run the commend "sfc /SCANNOW in CMD under the Administrator privileges.In the event, corrupted files were found and successfully repaired.
At this stage, I think I will see if this provides system stability, before sending the associated report with the Windows Event Viewer.
I remain grateful for your attention, time, effort and co-operation in this assisting me to resolve this issue.
Kind regards
Ian
Ian R. W
[/private]
Dear Suzanna,
Further to my correspondence sent to you on the 5th November, I have continued to receive intermittent crashes/freezing on my PC, so as recommended, I attach the associated Event View Log, in the hope this data will be able to assist you in resolving my issue.
Kind regards,
Ian
Ian R. W
BSOD
Im getting Kmode_Eception not handled, System Service Eception and Unexpcted Kernel Mode Trap when i play game. i couldn't find the problem even i bought your Driver Pro to update all driver it still the same. what is the problem?
ошибки в дисках C, D
Здравствуйте! Почему программа находит ошибки в дисках, но не указывает и не исправляет? Спасибо
тормозит оченьсильно
у меня очень долго думает ноутбук и иногда исчезают с и d диски пока не перезагрузишь не появятся
BNP detected fatal error
I am having blue screen issues. BNP detected fatal error occurs every time I restart but not on shutdown.
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
The problem started after I installed MS flight simulator
I have:
~Checked the HD for errors
~Uninstalled Flight simulator
~Updated Windows to latest version
~updated Graphics Card to latest version
~run sfc/scannow
driver power state failure
Здравствуйте!
Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.
Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.
Ноутбук куплен прошлой весной.
Скажите, пожалуйста, существуют ли способы решения этой проблемы?
С уважением, Иван.
Мой ноутбук иногда являет синий экран с сообщением driver power state failure. Ноутбук Hewlett Packard, ОС Виндовс 10.
Антивирус Касперский, ещё стоит Auslogics BoostSpeed 12.
Ноутбук куплен прошлой весной.
Скажите, пожалуйста, существуют ли способы решения этой проблемы?
С уважением, Иван.
Startup Applications Automatically Getting Disabled
Startup Applications Automatically Getting Disabled. They are enabled in the startup in Task Manager and then disabled when I restart the computer. How can I fix this?
тормозит видео в браузерах
здравствуйте тормозит видео и графика в гугл хром процессор amd e 240 видеокарта radeon hd 6310grapchics windows 7 максимальная как избавится от лаганий ноутбука и видео
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 12,8 Mb
Download size: 12,8 Mb
Compatibility: Windows 11, 10, 8, 7