Windows 11 will not recognize and allow either of these two really nice, brand new, input devices to operate in the windows environment.

I've used the Auslogics Driver Updated version 2 to make sure all the drivers were current and operational.

I'm running a MSI Rader GE76 12UE 871, with 64 GB Ram, and 3 TB of SSD storage. I've also verified with the MSI Support site that I'm running the latest version of BIOS.

Everything else seems to run just fine.

I can utilize any BT keyboard and mouse without issue.

When I boot the system into BIOS setup, the USB G203 mouse works just fine and allow me to make any selections that I might need. I've also taken both devices to my wife's laptop and they both work just fine there as well so I'm fairly positive there is some setting in the windows environment that has become corrupted and will not allow me to uise these nice devices.

Buongiorno,
le cartelle, i file ed in particolare le foto si aprono molto lentamente. come posso velocizzarle ?

I have been trying to fix an issue for 60 days now and I decided to purchase your software. At this time, I hope that I have purchased the correct program? My issue occurred when I decided to switch from Panda Dome anti-virus to Bitdefender (BD). During the installation, I got a prompt that stated for me to remove my Malwarebytes AV, which I did. However, BD gave me no notice about my Hitman Pro.Alert AV program. After I had installed BD, a few day later, (SEP 24), I ran a Hitman Pro.Alert scan. It found one item, a suspicous ".dll file" and asked if I wanted to quarantine or delete? To keep this short, I used the quarantine option, because if there were any issues, I could just remove the quarantine. Well, yes, there were immediate problems. My tool bar display changed and I found out quickly that I could not move pictures or files from (for example) Downloads to My Documents. It also affected my ability to use my graphic art software, such as COREL. There's a lot more to this and I am very disappointed with Sophos, who bought the rights to Hitman Pro and Hitman Pro.Alert. Bottom line, I was not able to restore this "quarantined .dll file."

After realizing this, I went to my system restore, to restore my computer, but I was stunned to see that there was only one option, and that was for the SEP 24 date. I had no idea if this date (and time) was before or after the incident. When I tried to restore, I ended up getting a prompt stating that the restore failed. When I went back to the system restore page, the SEP 24 date was gone. So at this point, I knew I was in trouble. I know more that the average person about Windows Operating Systems and I did a lot of research trying to fix this problem which I feel is in the System Events Notification Service. At one point. I had gone into the HKEY system for the System Events Notification Service and changed a "2" to a "1" so as to enable the service. When I restarted, my tool bar was restored and I could move files again, but my tool bar had went to a default icon setting and my speaker volume icon was now hidden. Later, I restarted my WIN 7 Pro HP tower and all the former issues reappeared. What upsets me is that I normally would have taken a screenshot of the file name, but in this case I didn't, because I thought that I would be able to restore the file.

So I just ran your Registry Cleaner and I do not think that I have the correct software that you offer? Is RC10, just a cleaner? Your ad made it seem like it fixed corrupt OS files. Please let me know if RC10 is capable of finding and restoring dll files in my WIN 7 OS. If not, then I am going to contact PayPal and request a refund. If Auslogics has a different software for recovering/repairing dll files, then I will purchase it. About two weeks ago, I purchased a software program due to how it was advertised, only to find out that it only restored "non OS" files and documents. That is not what I was wanting. I need a software program for restoring/repairing OS files.

I have lost the central vision in both my eyes and am in South America for 3 months visiting my kids.
The BSOD error has appeared and my Operating system now does not function.
I had my previous OS on a SSD and now have access to my PC and using an External Disk Hub, I can access the files on my Local Disc (ex) which no longer works which is now indexed as I:

How can I set the Driver Updater to test Drive I: to see if the problem can be rectified and I have access to my specialized programs again?

And can you reference me too the steps to be able to recover my PC please

Как отключить автозапуск при включении Win

BUENOS DIAS

AL PRENDER LA LAPTOP HP OMEN SE CORTA LA CARGA MOSTRANDO UNA PANTALLA AZUL CON ERROR DE IRQL NOT LESS OR EQUAL Y SE REINICIA LA PC, PERO OCURRE VARIAS VECES HASTA QUE INGRESA A WINDOWS. LAS PANTALLAS AZULES CAMBIAN VARIAS VECES COMO:

- IRQL NOT LESS OR EQUAL
- SYSTEM THREAD EXCEPTION MODE
- KERNEL SECURE BOOT MODE
- BAD POOL CALLER
- A VECES INDICA QUE LO QUE FALLO ES EL ARCHIVO ntoskrnl.sys Y APCI.sys

ESPERANDO SUS RESPUESTAS AL ERROR PRESENTADO, YA ACTUALICE LOS DRIVERS CON AUSLOGIC DRIVER UPDATES, CORREGI CON REGISTRY CLEANER PERO SIGUE OCURRIENDO

Здравствуйте почему Ауслоджик удаляет установленные обновления и препятствует их загрузке.Можно ли востоновить установленные обновления.

почему компьютер не видит карту памяти со встроеного картридера?

I log into my laptop as local user ACS_LLC but when logged in it shows my email as mikewruth@gmail.com
I have run an elevated command prompt - commands ...
I ran "sfc /scannow", and it said "Windows Resource Protection found corrupt files but was unable to fix some of them".
I ran "DISM /Online /Cleanup-image /Scanhealth", and it said "No component store corruption detected".
I ran "CHKDSK C:", and it said "Windows has scanned the file system and found no problems".

When I get to the command prompt through the Recovery Window it opens as directory X: not C: and when I use the cmd X:/cd.. it does not show C: only X: drive letter

how to eliminate all references to the installation of a software from the Windows registry, in order to completely clean the installation files still present in the system and which are not eliminated by uninstalling that program

Buongiorno
la barra degli strumenti ha i segurnti malfunzionamenti
Non è possibile digitare nel campo CERCA
Cliccando sull' icona WIFI e su quello altoparlante non compaioni i relativi menu a tendina
Non è attiva neanche l' icona Notifiche

Come posso rimediare ?

Grazie

During update of
2024-10 Aggiornamento cumulativo per Windows 10 Version 22H2 per sistemi basati su x64 (KB5044273)
a t the end i have error (0x800f0831)

WindowsUpdate Not working due to corrupted files & MSOffice 10 Prof does not install

Can this tool set "Windows taskbar weather/news/interests"? Visible or invisible

How can I use my Auslogics subscription with my new windows download. The hard drive had to be wiped and I lost the Auslogics program.

ASUS N73SV init W7 updated W10 NoVirus NoBug Regularly optimized

Bonjour,
Depuis plusieurs mois, toutes les mises à jour du type "Mise à jour de fonctionnalitré vers Windows 10 - 22H2" se terminent avec un code erreur 0x8007001f. Cela se reproduit tous les jours maintenant.
Mes tentatives de correction du problème n'ont pas abouti. Merci de m'aider.
Je ne suis pas un expert Microsoft.
You are my only first hand help
Friendly yours
Jean Farny

My CD drive has stopped working. It has power, opens and starts spinning but then nothing. When I click on CD drive in system information I get Can`t Collect Information cannot access the Windows management instrumentation software. Windows management files may be moved or missing. I am working through all resolutions on youtube but getting nowhere. You can see from the attached screen shot their are no IDE/ATA ATAPI files listed. Help

Windows update is not working properly

افزایش سرعت اینترنت

Hello, I have a curious problem on my Windows 11 PC.

I am connected directly to the LAN via ethernet to a 900Mbps fiber connection.

However, when I try to download largish files (several hundred MB or several GB) from sites like zoom, wetransfer, facebook, I often get a generic "download error" message.

I've tried download the same files on Edge and Chrome, logging out and in, opening a private/incognito window, resetting the internet settings and running diagnostics. I've also checked the internet speed and latency.

The downloads often start okay, but stop after sometimes 30-40MB or maybe even getting to 60%. Sometimes I can click on resume, but the download begins from scratch. Sometimes, I will try again a few hours or a day later, and the file(s) *might* download to completion.

Other downloads (of small image files, say) or streaming of YouTube, Netflix, etc. never seems to have a problem.

I know for sure that it's a PC configuration problem because I tried the same downloads on a Windows 10 laptop, connected to the same router via WiFi, and all the files downloaded (albeit slightly more slowly) without a hitch.

Any ideas or suggestions on what I can do next?

Thanks,
Gary

PS *I* am the IT person at our group. I have admin access to the router and the PC, of course.