376 questions
Problem mit dem Optimieren in Disk Defrag 11
Ich habe eine Festplattenpartition, in der die Files über den gesamten Bereich verstreut sind, mit großen Lücken dazwischen. Bei Benutzung der Option "Defragmentieren und Optimieren" in der bei Auslogics gekauften Version Disk Defrag 11 steht der Rechner praktisch. Die Optimierung eines einzelnen kleinen Files dauert Minuten. Die Defragmentierung dagegen läuft normal. Da ich die Kaufversion wegen der Optimierungsoption erworben habe, bitte ich um eine Antwort, wie dieser Fehler beseitigt werden kann.
Ich benutze Windows 10, 64 bit.
Ich benutze Windows 10, 64 bit.
file recovery
I`ve recently done a deep scan with boost speed 13 which resulted in me losing all my download files from the users file. I`ve tried recovery several times using different restore points without any success. I ran advanced recovery software which tells me they have to be saved to another location. Selected drive D but still don`t see them. Is there any way i can recover my downloads with boost speed 13. ?
remarque
je ne sais pas si la question est déjà posée ou non, mais voilà ma question.
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
Je crois que ce sera plus rapide pour l'utilisateur si vous ajoutez un champ de recherche sur le tableau de bord (dashboard) pour acceder plus rapidement à un sous menu du logiciel.
Merci d'avance pour votre réponse.
Mes salutations.
Can I download any of your software on trial basis?
Hi,
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Presently I am on trial bases using Auslogics Registry Cleaner 10.
My question is simple. Can I download and install any of the software you offer on a trial basis and if yes please tell me how.
I am mostly curious about the computer speed up app version #13...
Thank you kindly-
Jackson
Auslogics Driver Updater should I cancel or wait for installation to finish?
I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Auslogics BoostSpeed が上手く使えません
マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?
impossible de supprimer adobe acrobat cause FullTrustNotifier.exe
bonjour,
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Maintaining Boostspeed
The latest version appears to be 13.0.0.6. Do you intend to maintain this product? as rapidly as things are changing it appears this product is not going to keep up.
taskbar\system errors\explorer.exe\overrun in slack based buffer
Since my first question my problem is getting worse. Now I'm unable to open the control panel the shortcut on my desktop disappeared as I tried to open it. Troubleshooter samething. I cant get a lot of things to open anymore. Cant contact Dell, Microsoft, boost speed 13 still works, but for how long? Please help me before I chuck this thing in the garbage
Explorer.EXE error code\ taskbar
About a week ago that code popped up with this text attached to it." The system had detected and overrun of slack based buffer in this application." Since then my taskbar has totally disappeared. I looked online and found some fixes, I've tried about 30 of them now and nothing works.. I've gone into the control panel to open the taskbar directly, it will not open.
Does this leave adult website traces
So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
indexação é apagada
Qual a chave que devo desmarcar na hora que faço a limpeza fina do windows com o Bootspeed 13 ? Pois sempre que faço uma limpeza fina profunda eu perco a indexação de arquivos e sou obrigado a dar o comando pra re- indexar, não só os arquivos com0o tambem a indexaçaõ do Outlook. O que acaba me obrigando a comandar uma nova indezação e isso demora muito.
fbaiao@netfb.com.br
fbaiao@netfb.com.br
Auslogics BoostSpeed13
Why can I not remove any brower add-ons (FF, Chrome) through the internet Optimizer? It shows the add-ons but says a setting or synchronization is preventing the process?
Thanks in advance - Scott
Thanks in advance - Scott
Proper Clean Up steps for Auslogics BoostSpeed13
Is there / what is the proper order in which to use the many tools for optimization and clean up with Boost13?
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
The version of AMD software is no compatible with your current installed AMD graphics driver.
I have downloaded and installed the latest version of AMD Software Adrenaline Edition 24.1.1 and it worked just fine.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Cubase and low DSP, ISR latency
Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
startupmanager
I got an errormessage from startupmanager.exe with a bug-report, see attachment. What to do about it?
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
VELOCIDADE E ESPAÇO I5
olá, sobre o assunto da firewall a resposta é excelente.
tens alguma informação de como alterar a VELOCIDADE RELOGIO da minha parte.
no entanto MODO JOGO ou BOOST
3 questoes.
pedro andre mendes
map
tens alguma informação de como alterar a VELOCIDADE RELOGIO da minha parte.
no entanto MODO JOGO ou BOOST
3 questoes.
pedro andre mendes
map
Empty folder program freezing up
Hello there. First time asking for assistance. The AB13 Suite works great except for the empty folder program which freezes up on both computers here at the office. Whole program then does. What now? Thanks....
Paul
Paul
REFUS de PAIEMENT par carte PASS ( carrefour )
Bonjour
Cela fait plusieurs fois que je tente de passer à la version PRO de TOTAL AV.
Au debut JE ne pouvais pas INSCRIRE le N° de la carte ( et cela 5 ou 6 fois )
Aujourd'hui J ' ai pu entrer le N° Mais le paiement à été refusé.
JE refuse le PEIEMENT PAY PAL
J' irai voir pourquoi le paiement a été refusé
IL MANQUE des RUBRIQUES à vos QUESTIONNAIRES
DIFFICILE de trouver un moyen de vous contacter
JE suis un peu Déçu
Vaysse
Cela fait plusieurs fois que je tente de passer à la version PRO de TOTAL AV.
Au debut JE ne pouvais pas INSCRIRE le N° de la carte ( et cela 5 ou 6 fois )
Aujourd'hui J ' ai pu entrer le N° Mais le paiement à été refusé.
JE refuse le PEIEMENT PAY PAL
J' irai voir pourquoi le paiement a été refusé
IL MANQUE des RUBRIQUES à vos QUESTIONNAIRES
DIFFICILE de trouver un moyen de vous contacter
JE suis un peu Déçu
Vaysse
Driver Updater on Win 11 platform
My laptop uses Win11 OS. I get notices that several drivers need update. I start Driver Updater. Shortly later I am notified Driver Updater cannot connect to sever. This only happens on Win 11,
James Denneny
James Denneny
driver opdater
will your driver updater get the driver for my printer and install
printer is hp deskjet f4100 seris
printer is hp deskjet f4100 seris
printer malfuntion after running Boostspeed 13
After running Boostspeed 13, my printer either stops working with a "user intervention needed" , or it stops printing in color. What settings can I use to avoid this problem? I may have to quit using Boostspeed
drives
What exactly comes with the ProVersion? I am having trouble with my SD drive, but cannot use the ProVersion to fix it!!
Defrag external usb drive?
Hello,
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
How to I use defrag 11 on an external USB drive?
My little dirve appears in Windows 10 but doensn't show up in your defrag software for me.
Thanks,
joshua
Auslogics Boost Speed registration
Hi. Could you tell me how many years is the access to Boost Speed if I purchase a key. I tried to find out if it is life time cost or one year. Your advertisement does not seem to give this information. Thank you. Paul.
BoostSpeed reading errors
On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
BoostSpeed13 更新インストール
ご担当者様
現在 BoostSpeed_12 使用中です。 _13 アップデートの購入続きを完了しました。 手順書に従う中で "ヘルプ" のプルダウン内に "レジスト"記述が無く、バージョンアップできない。正確な手順書をお送りください。
現在 BoostSpeed_12 使用中です。 _13 アップデートの購入続きを完了しました。 手順書に従う中で "ヘルプ" のプルダウン内に "レジスト"記述が無く、バージョンアップできない。正確な手順書をお送りください。
interceptação da snmptrap.exe
Ontem ao entrar não lembro bem, se foi no gerenciamento do dispositivo ou outro, daí vi essas palavras que eu antes
nunca havia visto. Lembrei logo de espionagem. Daí fui pesquisar e li que pode ser perigoso esse app. e ao mesmo tempo
que tbm pode ser útil. O que eu faço? deleto ou deixo no otebook??? Agradeço
nunca havia visto. Lembrei logo de espionagem. Daí fui pesquisar e li que pode ser perigoso esse app. e ao mesmo tempo
que tbm pode ser útil. O que eu faço? deleto ou deixo no otebook??? Agradeço
Actualizaciónes
¿Siempre es mejor actualizar todo el software (windows, sistema operativo, apps, drivers, etc.) a la versión más reciente que se vaya publicando? o cuando todo está funcionando en forma correcta ¿es mejor detener las actualizaciones para dejar todo como está y que se mantenga todo funcionando en forma adecuada?
Licence Auslogics
Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
Salutations cordiales.
André
Auslogics Game Power Plan, Economy, Work power plans
I would like to disable these power plans as i use Win10's Ultimate Power Plan. I noticed that it automatically replaces my preferred plan after using Boostspeed scanner.
I am making this request bec i don't know what these power plans do and how they perform.
I am a Boostspeed 13 subscriber, details of my subscription are added below for your reference.
Thank you
Delete/clean norton
Why won't Auslogics BoostSpeed clean norton during a scan. We really like your product but don't want lingering files from Norton when it's not being used.
John Smith
John Smith
Removing single items at a time.
After using the Registry Cleaner I have problems with my VPN. If I reinstall the backup everything returns to normal so I need to be able to clean the problematic files found in the scan one at a time so it does not destroy my VPN. How do I clean problems one at a time?