My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
Не отображаются элементы сайтов
Здравствуйте.
После оптимизации Auslogic BoostSpeed 11 перестали отображаться в браузере на сайтах: подложки карт местности, он-лайн графики.
Program opening
My subcategory would have been the Boostspeed program but wasn't listed so I chose any in order to get the question submitted.
I am using Version 12 of Boostspeed on a Windows 7 platform. My question is: Why does it take so lone for the program to open when double clicking the icon from the Desktop?
File Shredder
I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
How to prevent the software from deleting cookies of Bank and Credit cards
I have Banks and Credit Cards that I use regularly. I don't want to have problems of logon to them every time I use the Bootspeed to scan the system. The Bank that I hvae problems after the Bootspeed scan system Is Bank of American.com, Chase Bank logon. Visa logon, American Express .com Credit Card logon. Please help me to resolve these problem. Thank you,
Производительность ПК
Ваша программа периодически выдает сообщение о перегруженности процессора моего ПК и отсылает к "подробностям". А подробности - это сканер всех работающих и неработающих программ в компьюторе. Ваш сканер при этом никоим образом не оценивает важность запущенного процесса для работы компьютера. По сопровождающим характеристикам определить возможность отключения того или иного процесса очень трудно. Тогда какой смысл ваших обещаний "оптимизировать работу компьютера", если инструментов, реально выполняющих эту фунцкцию в части отключения второстепенных процессов, вы не предлагаете?
Performace Issues
Recently, Whenever I reboot my system and run "scanner" I end up with 74 performance issues (file extension) like:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.asf\OpenWithList
Resolve supposedly corrects the problem, as with rescan, no issues remain. They reappear after reboot!
FYI, ccClean finds no registery issues.
I want boost speed to startup when win 10 starts
I cannot get this boost speed 11 version to create a staru up buttom to check or uncheck. So, currently I must start my pc. Then start boost spped 11 and diminish to the lower tray daily. I would like to set it to Start each time my pc is turned on automatically.
I do get a failur when I try to set this auto run featur from the settings within boost speed 11. I seaprch online and cannot find an answer.
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Recommended
DOWNLOAD NOW
Download size: 22,5 Mb