410 questions
Boost speed does not recognise pro
I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
Colin Summerfield
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
Content hidden to protect privacy
administrator blocked auslogics
I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.
Kind Regards,
Michael Figueroa
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
Hallo,
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
ホルダーが「空」になる
ｂｏｏｓｔＳｐｅｅｄ12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、（Ｄ）に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Content hidden to protect privacy
Making best use of the high system resource usage detected warning
Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
windows search
I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
外付けHDDのデーター復元
Auslogics bootSpeed 12のマイタスクの項目を処理したら、外付けHDDのデーターが消去されてしまいました。あまり画面を見ず、いいかげんに処理してしまいました。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
Auslogics - Disk Doctor (Repair)
Hello Sir/Madam.
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
As per an initial scan with the Disk Doctor, it diagnosed having disk errors on my SSD.
For any further analysis, it states that my SSD will be dismounted and locked while it performs its majic.
My questions:
- What are the consequences if the SSD is not remounted onto my Surface computer,
- Is the Disk Doctor a reliable software, or could I be left in a lurch if the SSD is not reconnected to my computer and
- How long could the repair take. I have a 500 GW SSD.
Regards,
Pietro Di Zanno
impossible de supprimer adobe acrobat cause FullTrustNotifier.exe
bonjour,
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Deleted files
When removing files to speed up the computer, BoostSpeed deleted *.wsw files essential to my business. These are a part of a software application called Website-Watcher and include several hundred "bookmarks" that took years to develop. Can you tell me where they went and how I might recover them?
My BoostSpeed app will not recognise my Pro status
Examples of this issue in the atchd doc.
My BoostSpeed is the Pro level app and it is good for another 300+ days. However, the app does not know this fact. It will not allow me access to the Pro features. It requires me to buy the Pro level features. I do not understand how the app indicates I have Pro yet at the same time the app thinks I only have the free version.
I do have and have paid for Pro for the 300 days.
When I tired to re-register the Pro license key, it indicates I'm already Pro registered. Yeah, that's obvious. Why doesn't the app know this?
Thank you for your support and education. Shane Ostrom,
Content hidden to protect privacy
Cartel que aparece cada vez que enciendo la CPU.
Hola. No lo manejo al programa como corresponde, pero tengo un problema que no me lo resuelve. Cada vez que prendo la CPU, aparece un cartel del antivirus de windows 11, que no lo puedo sacar. Me pueden orientar?
Allow list
What do I have to add to Malewarebytes "allowed" list to get your software to run? If I run Malewarebytes it quarantienes your application.
letters are very thin -hard to read
Dear Sir/Madam
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web
How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear
Thank you
Andreas Y
About BoostSpeed
Sorry about the bogus Subcategory- apparently I cannot send without one but BoostSpeed is not listed.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
programa ya instalado
Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
Driver Updater on Win 11 platform
My laptop uses Win11 OS. I get notices that several drivers need update. I start Driver Updater. Shortly later I am notified Driver Updater cannot connect to sever. This only happens on Win 11,
James Denneny
James Denneny
auslogics boostspeed
i hava auslogics boostspeed 12 and i paied for the new version 13. i didn't get he new version. can you send me a link to download the ne version.
BoostSpeed wipes out VS2022 install data
Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.
Please advise.
mistakes
Why does ABBYY FineReader 14 make mistakes in characters when scanning large and clear printed text without interference?
Memory problems & Upgrade question
I want to upgrade to 13, but the only offer I have is for 3 PC's. I don't have 3; only 1 Is there a discounted rate now and in the future for one app?
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
I also have a problem with the fact that I have to use 2 memory hog apps. Do you have an app (similar to Iobit's) that will allow me o release unnessecary memory?
display driver
card: geforce rtx 2060. During a recent driver update that failed the old nvidia driver was replaced by the basicdisplay.sys driver and my card is no longer even recognised by my system. Nvidia driver update fails. i've tried every fix listed, nothing works. Windows update fails with the 0x800703f1 error for everything now. You own driver updater now hangs at connecting to the cloud. I even tired a manual instal. that failed as well. How can i reinstall a display driver?
Browser cleanup
How do I get Cyber Protect Home Office to remove privacy issues in my browsers? I have thousands (yes, thousands) of pointers or cookies identified in the scan that never get removed. None of the previous versions of BoostSpeed would remove the offending files either. Thank you.
New Problem Notifiction
Now, everytime I turn on my computer, I get this notification and I don't know what the problem is.
Never updates any drivers for two years now...
I do NOT want to uninstall Driver Updater. I want it to work and it has never updated a single driver, yet.
PC slows down after a period of being on, following re-boot.
This has happened a while (over a year): I leave my PC on 24/7 to get updates, etc.
After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.
I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.
Have you run into this anomoly before and/or do you have a fix for this?
Many thanks!
After I re-boot it works fine but several hours or perhaps a day later, the PC slows down and re-quires another re-boot.
I just noticed today, after upgrading to V 12.3.0.1 that, although it still slows down, I selected the Disable BoostSpeed instead of leaving BoostSpeed running in the background, and the PC immediately sped up to normal! This is the first time I have tried that.
Have you run into this anomoly before and/or do you have a fix for this?
Many thanks!
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7