410 questions
Boost speed does not recognise pro
I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
Colin Summerfield
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
Content hidden to protect privacy
administrator blocked auslogics
I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.
Kind Regards,
Michael Figueroa
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
Hallo,
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
ホルダーが「空」になる
ｂｏｏｓｔＳｐｅｅｄ12を自動起動していますが、本日データを参照しようと、windows(C)とData(D)のデスクの中で、（Ｄ）に保存してあるホルダーをクリックすると、「このホルダーは空です」となってどのホルダーもデータが読み取れません。ホルダー名はきちんと表示されています。なぜこんな風になるのでしょうか。復元する方法をご教授してください。
pop up for ugrade when I already subscribe to boost 12
I upgraded to Boost12 quicte some time ago and yet I keep getting an annoying popup on my screen to upgrade. I need this to stop and this should not count as one of my questions because it is purely an issue on your end.
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Content hidden to protect privacy
Making best use of the high system resource usage detected warning
Boostspeed regularly gives me a warning message, "high system resource usage detected." What should I do to most usefully take advantage of this warning?
windows search
I have given automatic duties to boostspeed and it keeps deactivate or destroy my window search which i need. Jow can i stop this?
Register errors
I just purchased BoostSpeed 12 and installed, but errords pop when I try to enter my license key. I'm going to attempt to uninstall and reinstall in the meantime.
msedge.exe
Wenn ich nach einem Systemscan durch Auslogics den Button für die möglichen Reparaturen drücke, erscheint die Aufforderung, bestimmte Apps erst abschalten zu lassen. Dafür wird fünfmal msedge.exe aufgezählt. Drücke ich den Button, der diese Anwendung(en) schließen soll, folgt die Mitteilung, das sei nicht möglich, ich solle es manuell machen. Alternativ kann ich anklicken, die Sache zu ignorieren.
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
Content hidden to protect privacy
P.S. Why isn't Auslogics a subcategory option?
Auslogics BoostSpeed 12について
「Auslogics BoostSpeed Pro12」「Auslogics Driver Updater」と「Disk Defrag Ultimate」のボタンがありますが、インストールすると別途、料金が発生するのでしょうか？
Auslogics Boostspeed 12
My computer is a 64 bit machine which can run 32 bit programs. My computer is running Boostspeed 12 using 32 bit versions of all its programs instead of the 64 bit version. Is this the reason why my computer is taking over an hour to startup in the morning with the disk using 93% to the usual 100% all the time? Or, is the problem due to too much disk thrashing since it appears that all the startup programs start up immediately instead of being staggered per the scheduler? This problem started when I had to uninstall Boostspeed 12 and reinstall it per the Auslogics support person.
Gah. Cannot access Report
I have not been able to view any of the reports in the Auslogics software. I just get a blank window in Foxfire.
Auslogics BoostSpeed software itself
I have BoostSpeed perform Dashboard, Disk Defrag, Protect. Internet Optimizer and other checks by schedule. All is good.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
外付けHDDのデーター復元
Auslogics bootSpeed 12のマイタスクの項目を処理したら、外付けHDDのデーターが消去されてしまいました。あまり画面を見ず、いいかげんに処理してしまいました。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:￥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか？？？
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
BoostSpeed reading errors
On the bottom strip of the main display on BoostSpeed there are alternating displays of some statistics for CPU HDD NET and RAM. All of these consistently show 0%. Why are they not reading?
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
Also I frequently get a pop-up suggeting I clear my browser cache because it contains anywhere from 23 to 46 TERABYTES of data. This is odd because I have only 3 TB of available storage on this machine.
interceptação da snmptrap.exe
Ontem ao entrar não lembro bem, se foi no gerenciamento do dispositivo ou outro, daí vi essas palavras que eu antes
nunca havia visto. Lembrei logo de espionagem. Daí fui pesquisar e li que pode ser perigoso esse app. e ao mesmo tempo
que tbm pode ser útil. O que eu faço? deleto ou deixo no otebook??? Agradeço
nunca havia visto. Lembrei logo de espionagem. Daí fui pesquisar e li que pode ser perigoso esse app. e ao mesmo tempo
que tbm pode ser útil. O que eu faço? deleto ou deixo no otebook??? Agradeço
Removing single items at a time.
After using the Registry Cleaner I have problems with my VPN. If I reinstall the backup everything returns to normal so I need to be able to clean the problematic files found in the scan one at a time so it does not destroy my VPN. How do I clean problems one at a time?
Licence Auslogics
Bonjour, je suis client chez vous depuis plusieurs années, si je prends la licence pro, aurais je la totalité de votre logiciel avec bien sur la défraguementation des disque SSD? ... Merci pour votre réponse.
Salutations cordiales.
André
Salutations cordiales.
André
Question about All my 'Subscriptions?
I have an important Question regarding with my 'Subscriptions: 1 Question: After an Year time are All my 'Subscriptions with Auslogics will Renew Automatically?...or After an Year time when my subscriptions will gonna expire should I buy New Licenses for all my Subcriptions again, I mean do i need to do it manually?again? Please Let me know? thanks!
Gerenciador de dispositivos
Quria programar a hora da luminusidade do écran mas não consigo, poderá ter sido da desfragmentação?
Registry Defrag
I am being bombarded to upgrade this software but there is this error message that keeps coming upand the Defrag process is never completed. Error:;- 21470244894. Task Schudeler. ERROR Code 0x8007002
ERROR Save Task (the system cannot find te file specified)
ERROR Save Task (the system cannot find te file specified)
Intergrate software/APPS
I have 2 dictionary appsw on my comp[uter/desktop. But I can't seem to get them on WORD, a microsoft program. Do I have to add them as an ADD-ON?
Fehlermeldung
Hallo,
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
Leider kann ich keine Software mit dem Programm mehr aktuallisieren es kommt immer dieselbe Fehlermeldung:
failed download failure
was verhindert die Aktuallisierung bei dem Programm.
Als Virus Programm nutze ich Kaspersky
Als Betriebssystem nutze ich Windows 10 Pro
mfg Klaus Schwabe
boostspeed tray icon
What is the little red dot that appears on your tray icon? When it appears, what does it mean? How do you get rid of the red dot?
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Also, my subscription is expiring sson. I will renew if you can give me a discount/promo code. Thank you in advance. Scott
Disk Defrag
HI,i have noticed a few times now that when all disks are checked my C; SSD disk gets stuck at around 71% and doesnt complete.All other SSD: ( D; E; ) finish. Even then when i stop the optimisation and uncheck disks E and D then try running just C; it still gets stuck. The only way then is to restart my PC and run optimisation only on C; it finishes the run. Its only a small hick up but i thought it best to make you aware of this/
Where to find the Optimize Tab
In Auslogics Boostpeed 13 the Optimize Tab disappears in Advanced Mode after closing the app and relaunching Boostpeed 13. I tend to forget or cannot find the tool that creates the Optimize Tab. Which tool houses or creates the Optimize Tab?
Rregister Editor
Why is your software allready more then 4 hours busy scanning my registry. The first 1200 entries went quick but after that things are slowing down. I have 12.186 registry keys
DSN resolution failing
I have an older PC and thus tought it would be good to get Auslogics Bootspeed 13
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
I did a scan and followed the recomendations
however I now regularily get the issue that the internet connection to my DNS server is gone
he tells me that the addr. cannot be resolved (see also screen shot in doc)
it seems to go away after a while, without me taking action? - but when it happens it hinders a lot.
could you please tell me that this can ideed be due to cleaning caches, optimizing settings though Bootspeed?
where to fix/repair?
not sure it is the Auslogic cleaning - but it started at the same time
I am using Proximus as provider in Belgium and have the Norton 360 suite installed
running windows 10 (PC seems a bit old to run W11, but it did the trick quite well - till recently :-( )
issue happens on WIFI and Cabled connection
Recommended
DOWNLOAD NOW
Total Downloads: 2 107 934
Download size: 22,5 Mb
Download size: 22,5 Mb
Compatibility: Windows 11, 10, 8, 7