Boost speed does not recognise pro
Colin Summerfield
blocked
using my shortcut for disk defragmenter pro
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
administrator blocked auslogics
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
ホルダーが「空」になる
pop up for ugrade when I already subscribe to boost 12
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Making best use of the high system resource usage detected warning
windows search
Register errors
msedge.exe
Frage 1: Wenn ich es ignorieren kann (und gleich fünf mal), wofür ist es wichtig?
Frage 2: Wie schaltet man msedge.exe manuell ab?
Auslogic Defrag Issue
Defrag hung up on file C:\$Extend\$UsnJml:$J
Went from 3.8% to 13.30% completed and took over 22 hours as you can see in the screenshot attachment.
How can I get defrag around this issue so it can complete the optimization?
Thank you
Dennis Miller
P.S. Why isn't Auslogics a subcategory option?
Auslogics BoostSpeed 12について
Auslogics Boostspeed 12
Gah. Cannot access Report
Auslogics BoostSpeed software itself
However, directory "c:\ProgramData\Auslogics\BoostSpeed\12.x\Reports" becomes cluttered with .html, .xml and other reports produced by these various check tools.
How can I set BoostSpeed to automatically clean up after itself by deleting ancient reports over some arbitrary age? There's about a Gig of files in this directory on this machine and some 3Gb on another.
外付けHDDのデーター復元
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:¥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか???
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
installation logiciel
Auslogics Driver Updater should I cancel or wait for installation to finish?
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
How to avoid file delete problems in Lightroom Classic
Saved on PC Email
Anti-virus
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Не работает веб-камера
auslogic
updates
i have updated the first driver in the list of drivers to be updated many times, why does it continue to on the list.
i update drivers 2 or 3 times a day but the list doesn't get any shorter,why.
The version of AMD software is no compatible with your current installed AMD graphics driver.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Maintaining Boostspeed
Change DNS
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
Auslogics BoostSpeed が上手く使えません
Cubase and low DSP, ISR latency
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav