Auslogics Driver Updater should I cancel or wait for installation to finish?
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Auslogics BoostSpeed が上手く使えません
impossible de supprimer adobe acrobat cause FullTrustNotifier.exe
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Maintaining Boostspeed
taskbar\system errors\explorer.exe\overrun in slack based buffer
Explorer.EXE error code\ taskbar
Does this leave adult website traces
indexação é apagada
fbaiao@netfb.com.br
Auslogics BoostSpeed13
Thanks in advance - Scott
Proper Clean Up steps for Auslogics BoostSpeed13
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
The version of AMD software is no compatible with your current installed AMD graphics driver.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Cubase and low DSP, ISR latency
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
startupmanager
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
Adding Subtitle to Movie
Gostaria de ter
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
Versionsunterschiede von DiskDefrag zu DiskDefrag Ultimate
Der Preis von 21,56 € ist ja beiden identisch.
auslogic
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
deleted activation informations of windows10 pc
I was obtained next messages. Maybe other sofware's Activation informations were destroyed.
(1)C:\ProgramData\Stardock\Fences3\License.sig was deleted.
The first massage is that reactivate fences 3. (Activation code is neaded)
(2)In the case of Auslogics driver updater, my activation code exceeded the limited number of activation.
And the costomer service replied me by mail that they cannot refresh my activation code.
(3)Next massge window opened that I rejister again Sound Blaster of Creative Teclonogy co.
(4)From now on, what do I do to prevent missing activation informations of my Windows10 pc.
Вирус
popup reminders
ошибка
Unable to to Receive Emails on Laptop and Desktop, etc
Since changing my password wuth my ISP and on Thunderbird, I am unable to receive emails on my Desktop, and now for some reason, I can n longer send them either. I also have problems with laptop, I can send but not receive emails.
Error message on Desktop: "An error occurred while sending mail, the mail server responded: SMTP.auth. Not alowed on Port 25"
For replies use:
Roger Hilton
Fed Up with Spotify Slowness and Bloatware
Failing that, I suggested many years ago that they should Release a Spotify Compact or Spotify Basic software option and that option is already on their Forum for voting on
Interfearing with VPN
Whenever my VPN connects to the internet, the Auslogics Bootspeed notifies, an attempt to change the DNS was diplayed. Well if I connect via VPN it will change the DNS. My question is does your softwere blocks the attempted change of DNS or it's only a notification. If it blocks then how do I dissable it as I want my VPN more than your software.
Thank you,
Winston
Spam website on startup
Fences Requires Reentry of Product Code Everytime BoostSpeed Runs
I have had Fences for many years. When BoostSpeed runs its weekly maintenance, I must re-enter the Fences Product Key to re-register the product. I do this and Fences works fine again.
This problem occurred several years ago and you provided a fix where BoostSpeed does not delete/address a file required for Fences related to the product key.
Would you please re-send those instructions if that would resolve the issue or advise other solutions to resolve?
Thank you,
Rich Sullivan
外付けHDDのデーター復元
File Recoveryでデーターを復元したいのですが、その方法を教えて下さい。
尚外付けHDDは、デスク管理上では、認識しています。RAW 正常 ベーシック データーパーティションとなっています。
しかしエラーメッセージがでます。F:¥にアクセスできません。このボリュームは認識可能なファイルシステムではありません。必要なファイルシステムドライバーがすべて読み込まれているか、ボリュームが壊れていないか確認してください。とのエラーメッセージです。
コンピュータ上では認識していますが、しかしFile Recovryを開くと、HDDは認識されていません。どうしたらいいのでしょうか???
このHDDには、重要なデーターが入っています。データー復元は失敗でいません。
ダメでしたら、業者にだします。
Registry Cleaner 9 ¿Es similar al antiguo Pc Tools Registry Mechanic?
Mi pregunta es ¿Qué diferencia hay con Registry Cleaner 9 a lado del antiguo Pc Tools Registry Mechanic? Comprendo que la aplicación Registry Mechanic tiene seis años que se descontinuó, pero me gustaría saber si Registry Cleaner 9 tiene algoritmos parecidos o diferentes a los que usaba el Registry Mechanic al momento de escanear y de limpiar el registro, o si Registry Cleaner 9 fue creado desde cero. Simplemente para resolver esta duda que tengo.
Agradezco de su tiempo y saludos.
logiciel
à l'ouverture de l'application un message d'erreur : 0x0000007E
j'ai supprimé 1 fois le logiciel
j'ai enregistré une nouvelle fois et à l'ouverture,jèai le méme message d'erreur
Minecraft
modを使ってマイクラを楽しんでプレイしてるんですが、最近forgeを28.1.76から最新のものに変えたら、起動するんですがメニュー画面まで行かなくなりました。
どうすればいいのでしょうか?
いちおう、エラーログを添付しますので教えて下さい。お願いします。
New update fails to open
I have auslogics BoostSpeed 12 Version 12.0.0.4 I get a message that their is a new version available to download and install.
I download the install program auslogics-boost-speed-setup.exe
When I click on the install program I get the error message that the filename, directory name or volume label syntax is incorrect and then the program dissappears. I have enclosed two screen shots. I am unable to install the upgrades. Please help.
Отображение web страниц
Подозреваю, что это связано с дополнением, показывающим боковые вертикальные вкладки vtabs
https://chrome.google.com/webstore/detail/vtabs/okpnlgbgcfchbicbhjmmhldhkbkfilce?hl=ru
Можно ли исправить это неудобство?
Удалять дополнение не хочется - оно удобное.
Спасибо.
Долгая загруска игр и текстур в самих играх.
죄송합니다. 하드웨어 질문 가능할까여?
램 점유율이 너무 높아서 질문 드립니다.
사진에 나온거 해봐야 인터넷 창 3개에 녹스 블루스택 1개씩 만 켜져 있는데
16기가 램이 저렇게 사용량이 나오는데 맞나요?
커밋됨 캐시됨이 높아서 이게 맞나 싶기도 합니다
해결법이나 이유를 알 수 있을까요?