1888 questions

Пропали значки из трея

Использовал вашу программу после чего пропали значки из трея, после сделанного я решил удалить программу но значки не вернулись, а с переустановкой пропали откаты в программе, пожалуйста помогите мне с этой проблемой
1293 views
Aug 23, 2020 at 02:48 PM

pendrive got corrupted when i applied free up space to it by auslogics boostspeed

two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....

and that's how my pendrive got corrupted by performing an operation "free space wiper"

1111 views
Aug 23, 2020 at 01:20 PM

Two issues:Text freezes and unsatisfactory settings

ever since installing this program and running it i'm very unsatified. Cannot type properly - text freezes every few letters and have to click the page with mouse to continue.
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.

Please advise

Jessica
1361 views
Aug 23, 2020 at 09:45 AM

Sleep Mode

I have Acer Aspire 5750 G laptop, pritty old one, with win10 latest. It works well but when it goes to sleep mode everything gets slow (all applications, movement of mouse, all system), I've been waited for a long time to give it a time to wake up but nothing. Only solutions is to restart it, and after that it is in normal working mode. Before latest win10 update (2004) it was OK.
I tried so many things to do (everything throu Auslogics, update driver, clean up, registry, defrag ...), but nothing.
Is there any advice from you?
1156 views
Aug 22, 2020 at 04:22 PM

toggle "attempt to change DNS" notification.

This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!

1250 views
Aug 20, 2020 at 06:34 PM

NON SI APRE PIU' IMPOSTAZIONI IN WINDOWS

DOPO AVER INSTALLATO AUTOLOGISTICS , IN WINDOWS NON MI SI APRONO PIU' LE IMPOSTAZIONI DI SISTEMA E WINDOWS UPDATE ... CHIEDO CORTESEMENTE UNA RISPOSTA .... GRAZIE 1000
1530 views
Aug 19, 2020 at 04:51 PM

Disc doctor

Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this

1191 views
Aug 19, 2020 at 06:52 AM

WiFi keeps disconnecting

For about 9 months now often when I click to go from one webpage or website to another my Wi-Fi disconnects. I either must reconnect via the Internet icon or when I run the Windows Network Diagnostics it always tells me that "The default gateway is not available" and it fixes it. I have run all sorts of 'FIXES' found on the internet but still not fixed.

Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
1253 views
Aug 18, 2020 at 02:08 PM

Is your softwares a virus?

Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.

Best regards,

Juarez Almeida.

1027 views
Aug 17, 2020 at 04:19 PM

fed up with lack of space on C Drive...what am I doing wrong?

I am trying to do everything right. Vigilance, using auslogics and bitreplica, as well as duplicate file finder, however almost every day, my hardrive fills up, and I can barely get a file to open, due to lack of memory. I have done everything that I know, to try to have all files saved to onedrive, or icloud, but it doesn't seem to make any difference! The computer jams up, because it has reached maximum capacity! Why does this happen, when I am saving files to onedrive (cloud storage). I'm really about ready to chuck this new laptop into the rubbish bin. But.....all available 'new' laptops appear to only have minimal hard drive space. The retailer told me to save my files to the cloud, which is what I am doing, so why does the C drive continually fill up. I move stuff to an external hard drive, in an attempt to free up space, but as soon as bitreplica runs, I'm back to square one. I'm so frustrated, as it takes several minutes just to open a word document. Please please please, can you give me some guidance / direction as to what it is that I am doing wrong. Regards, Kerry

1507 views
Aug 17, 2020 at 09:27 AM

Not Working

How to fix microphone not work
1137 views
Aug 14, 2020 at 06:55 PM

I cannot hear anything on videos etc

I used malwarebytes to eliminate issues regarding popups and since then I cannot hear any videos. I have tried everything from chrome settings (BTW no sound on Explorer or Edge either) up to and including this software to correct. However to no avail.

There must be something I am missing...please help.
Bob
964 views
Aug 14, 2020 at 02:57 PM

PC cannot see a webcam

A webcam physically presents on my PC, but system cannot recognize it. I tried many apps to detect a webcam but they did not help.

Thanks in advance.
1166 views
Aug 13, 2020 at 09:07 PM

Blocked URL's

Sir,

I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?

I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
https://client.atlasfmi.com/en-US/Dashboard

Thank you so much for your support.
Alex Janssens (Iepenburger)

1465 views
Aug 13, 2020 at 02:41 PM

タスクバーのタスクビューの表示

Auslogics BoostSpeed11でwindowsのたちあがりのスピードアップができるというのでやったのですが、その後、タスクバーのタスクビューをクリックしたところ、表示画面に「PCをもっと使用すると、ここにアクティビティが表示されます」と表示されるようになってしまいました。、以前には数日間のタスクが表示されていました。
元に戻す方法を教えてください。
1344 views
Aug 13, 2020 at 02:35 AM

Hangup

Since I upgraded my HD to a SSD, Microsoft Office Access seems to hang for 1 second every 30 secdonds.

1158 views
Aug 11, 2020 at 09:33 PM

Bluetooth device

My handsfree blue tooth device will connect but the sound will still go through the computer's speaker and not the bluetooth. What is causing this?
1133 views
Aug 11, 2020 at 04:09 AM

Mumble access to mic desabled

Somehow it happen, now I look how to get back access
1015 views
Aug 10, 2020 at 11:35 PM

Necesito una solucion

Quisiera que me ayuden con un problema,
puede que halla activado algo por accidente de este programa y ahora ya no puedo cambiar el brillo de la pantalla no encuentro ninguna configuracion, tampoco es un problema de controlador grafico ya lo actualize.
Ayudenme a solucionarlo
1154 views
Aug 10, 2020 at 06:18 PM

Do I need to defrag/optimize SSD

I have installed a new 1 TB SSD on my laptop. Your program initially set up to optimize and defrag it. I researched online, and no one recommends doing this as it will dimish the life of the SSD. Questions:

1. Do I need to enable this option?
2. Will using this program to clean up the registry do any damage or shorten life of the SSD?
3. I found online that it is not recommended to shred files on an SSD. If I have sensitve files that I deleted, on a SSD, is it permanently removed/unrecoverable by deletion or I should still use your shred operation?

In all of the above, I just want to make sure your program doesn't damage the life of the SSD. I also want to know if your features affect the SSD negatively or if it is needed at all. What is the positive impact of it on my SSD and operation?

1905 views
Aug 09, 2020 at 10:51 PM

Disable Edge Swipe in Win10 B2004 update

Hi Folks,
Thx much for your help on prior question!

Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.

F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.

Please tell me how to kill kill kill kill forever Win10 Edge Swipe.

Thx very much, Folks!
Scotty :-)
1438 views
Jul 23, 2020 at 11:45 AM

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?

1434 views
Oct 14, 2020 at 03:43 PM

not fixed

Hi I found your website on the promise that it would sort out the 8000ffff eroor? It hasn't, can it be sorted?
1434 views
Dec 30, 2020 at 11:02 PM

Не работает Скайп и Outlook после установки новой версии

Если раньше после установки новой версии переставал работать скайп, то сейчас и Outlook перестал работать....
Скайп не делает звонки
А Outlook не грузится вообще....
А вроде бы раньше неплохая программа была....

1434 views
Jan 05, 2020 at 01:38 PM

Проблема со спящим режимом

Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...

1433 views
Jan 30, 2020 at 03:31 PM

Медленно загружается

Медленно загружается, особенно Google. Что делать? Версия Windows 7 Home.
1433 views
Nov 10, 2019 at 07:11 PM

Re-enable the Windows key on the keyboard

How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
1430 views
Nov 14, 2022 at 05:14 PM

Issues Microsoft Flight Simulator (FS2020)

Hi, I have been a customer of yours for a long time. I am satisfied with the software but now I need to ask a question or rather a report.
I have the license for 3 PCs, and on one PC I have the new MSFS FS2020 simulator. Thanks to the backup I restored the files. The problem is that after deep cleaning privacy, traces in applications, empty folders, registry files, Windows system files could no longer start the game. I thought to warn you and I hope that the problem is solved. Thanks and sorry. My configuration: CPU i7-8700.... Windows 10 PRO.... RAM 48 Gb.... HardDisk M2 NVME samsung 1Tb.... GPU RTX 2060.
1427 views
Oct 01, 2020 at 12:43 PM

battery not charging

my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.

1421 views
Nov 12, 2020 at 12:01 PM

Edge Chromium

I have the new Microsoft Edge Chromium browser. Boostspeed does not recognize this browser. It will only clean Internet Explorer and the original Microsoft Edge browser. Is there an update coming with Boostspeed that will include this new browser? If so, when?

1418 views
May 17, 2020 at 02:42 PM

Auslogics BoostSpeed 12 после проверки сисстемы блокирует и выпиливает AdGuard из сисстемы

Доброго времени суток. Уважаемые разработчики, я давно пользуюсь вашими программами, в том числе и Auslogics BoostSpeed. За последнее время я пользовалась Auslogics BoostSpeed 10 и всегда всё было без сбоев. 23 мая 2021 года я решила приобрести Auslogics BoostSpeed 12. С установкой программы не было проблем. Но после сканирования и выполнения оптимизации устройства у меня перестал работать AdGuard и не просто перестал, я его не могу даже переустановить. Пришлось мне переустанавливать всю сисстему заново. До этого проблем с AdGuard не было у Auslogics BoostSpeed 10. Мне бы не хотелось удалять Auslogics BoostSpeed 12 и возвращать свои средства. Помогите разобраться, что нужно сделать, что бы Auslogics BoostSpeed 12 не выпиливал и блокировал AdGuard из моей сисстемы, т.к. я давно пользуюсь этим программным обеспечением и он меня полностью устраивает (лицензия оплачена). Я бы понимала, если бы он выпиливал, но сам заменял функции AdGuard, но после выпиливания данной программы я полностью остаюсь не с защищенным интернетом и с кучей не нужной мне рекламы. Как вы понимаете меня это не устраивает совсем. Очень надеюсь на помощь в отладке вашей программы с программой AdGuard. В противном случае мне придется откатить Auslogics BoostSpeed 12 до Auslogics BoostSpeed 10 и вернуть потраченные средства. Но еще раз повторяю, я не хочу этого делать, а хочу полностью разобраться в данном конфликте программю Так обе эти программы мне нравятся.
1417 views
May 24, 2021 at 05:57 AM

Wireless not working

Hi,
I ran a cleanup of the system yesterday and it siad it would enter a new driver for me. I said OK and now the wireless is not working. I have reinstalled all files that I thought may contain the information to no avail. What can I do to rsolve this?

1410 views
Sep 12, 2019 at 10:56 PM

Demande Information

Bonjour,

Comment faire pour Rechercher des fichiers doublons sur un Réseau NAS

Avec mes remerciements

Courtoisement

Jacques LOGEAY

1410 views
Jul 18, 2020 at 06:14 PM

Disk Defrag

Hello

what are the differences between Disk Defrag Pro and Disk Defrag Ultimate ?

If I installed Disk Defrag Ultimate, can I uninstall Disk Defrag

thanks
Paul

1409 views
Dec 12, 2020 at 09:44 AM

UsoClient

Hello Auslogics

It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.

No doubt this is a Windows thing, but it would be good to understand what is going on here.

Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).

If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?

Thanks and regards
Phil Parkin

1409 views
Dec 28, 2020 at 08:41 AM

Your help please

I called tech support to fix the follwintg problem "rquires elevation" I am still getting the same thing on numerous sites. Is there
no one that can fix this? Tried you on line solution but it does not work as described.

1408 views
Jan 03, 2020 at 04:44 AM

Paired but won't connect

I've tried everything to get my Sony bluetooth headphones to connect automatically, it is paired in "Devices" but when I switch the headphones on they wont connect, I have to go into Settings - Devices and physically connect by pressing the connect tab, I've tried going into "Services" then scrolling down to "Bluetooth Support Service", stopping it then restarting it, it just won't restart properly, the green "curtain" only goes about 15% accross before stopping i.e it has'nt restarted properely, any ideas!!!!
1407 views
Jul 14, 2020 at 11:04 AM

Cannot install new version of Pro v11.xxx

Whenever I get the message "a new version 11.~ is available, the download completes but will not install.
Check snip pic attached.

1405 views
Feb 01, 2020 at 05:27 PM

Windows Key

My windows key on my keyboard does not work and I have tried to run different tasks in the task manager and several other things but nothing seems to work. I saw on your website that this program can help.

1405 views
Feb 22, 2020 at 04:07 AM

Crackling sound after few hours

Hi, thank you for your time,

After a few hours of my computer being on, all sounds from the PC will have crackling sounds. There is nothing in particular that triggers it. No specific amount of time before I start to hear it. It has been happening for quite some time now

Thank you
1404 views
Jan 09, 2022 at 06:06 PM