Keyboard shift keys non-functioning, also upper case symbols (ie "@")
Hello,
After receiving the most recent Win 10 update and installing it, both shift keys have stopped working and I can't get upper case symbols.
I'm writing this on my old desktop, winxp. the Laptop in question is running Win10 having originally run on
Win7, then Win8 and now Win 10.
iVe tried rollback, updating drivers and restarting, deleting and reinstalling, checking Sticky Keys etc, also checking language layout.
I'm at my wit's end, can you help me please?
Regards,
Sue Youell
востоновление системы
добрый день, как ваша система моет навредить компьютеру или системе, она внесла изменения на пк отключила достуа к микрофону и камере, но я включил, я попытался сделать востоновления виндоус но очень долго востонавливаетет реестьр, я так и не дождался и перегрузил пк и теперю боюсь что ваша программа внесла изменения и придется переустоновливать виндоус, что делать, так вроде вск работает, как проверть, правильно ли работает щас система? спасибо
Want the operating system files checked and to be fully operational.
Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.
Thanks, L8R
VPN FortiClient
I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.
Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.
I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.
Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.
Office 2016
Whenever I use the tools (scanner, cleanup), afterwards I always have to do a repair (reinstall) of my Office 2016 products. How to clean my computer without messing up Office 2016?
Storage issues
Payment
When i wanted to pay for Auslogic Boostspeed 11 i couldn't complete the payment. That was because i use paypal and dont use a card for paypal.
The fact is that i dont use any type of creadit card or such, i only have a bankcard that i dont leave out for web buys. That is why i have used Paypal for such transactions.
Auslogic is so far the only company that tells me i need to have a card connected to my Paypal account.
The thing is as you demand that customers must use a card you are actually promoting some people to find a cracked version for Boostspeed 11 and use that. you are loosing out on sells by refusing to let people use paypal straight as it is.
Anyway, i hope you all have a nice day and take vare of yourselfe.
Mikael
changing language
Hello
I updatet to boost speed 11 a couple of days bevor .
Is it possible to change the language into german ?
I cannot read englisch as a river is floating, i only use schoolenglish.
In boostspeed 11 there's a many stuff included, that is new for me.
I understand the window of the older version better .
greetings bottlecup
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Auto Restore to earlier date
Is there a way AL BS can be used to create a system restore point (like in windows) to an earllier date?
Chrome isn't in Volume Mixer, Windows 10
Any tips/suggestions to get the browser back to Volume mixer?
BoostSpeed
Hi,
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
Thanks,
Michel
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Auslogics not recognising my ssd
I recently upgraded my hd to a ssd..
On some pages of Auslogics it shows new ssd and capacity but on others it still shows old removed hd.
Can you advise please
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
License
Dear All,
in 2015 I've purchased the Auslogics BoostSpeed 7 Premium and shortly was released a update and the software after update asked to be paid again which I've consider to be a unfair practice.
I am asking to provide me the posibility to install the software that I've purchased since at this moment in not possible to download the software from internet.
Kind regards,
Danil
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
problem after running resolve all issues early this morning
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
cannot open links in OUTLOOK
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Thumbnail files disappear
Because I waste much time to open and preview the photos and video thumbnail in Windows Explorer.
And how can I prevent the BoostSpeed delete my thumbnail cache files in my Windows 10 in the future?
Thank you very much!
WiFi keeps disconnecting
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
pc unplugged ac adapter pc shuts down with battery charged at high percentage
Keyboard issues.
I've just updated to windows 10 May update, have now completely lost functionality of shift keys.
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
registry cleaner
tried to use it but received message it has to be reinstalled. I need instuctions how to install.
Window.old folder
The PC had Update to 2004 Versione, now has the PC ond big 30GB Windows.old folder. why can i the folder delete
windows product
windows product ID for win 10 Pro is erroneous number as reported in system information
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
My Windows 10 Pro version asks for activation
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>