Want the operating system files checked and to be fully operational.
Check to see that all critical and necessary files are completely intact and functional like SFC /Scannow, and any other method you know of, so that when I go to re-install Windows 10 it will go smoothly and without a hitch! An example is that I can no longer use the pin I assigned to windows it just stopped working one day. And I've always had problems with the startup files from all versions of windows. Like my 1st install of windows 10 went bad because of the User.dat files getting corrupted, I couldn't repair windows, and I doubt that I could run restore and it would work. And I don't want to install windows 10 until I know it's going to run correctly.
I do nothing to corrupt files but they always seem to get screwed up by the operating system.
Thanks, L8R
VPN FortiClient
I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.
Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.
I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.
Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.
Office 2016
Whenever I use the tools (scanner, cleanup), afterwards I always have to do a repair (reinstall) of my Office 2016 products. How to clean my computer without messing up Office 2016?
Storage issues
Payment
When i wanted to pay for Auslogic Boostspeed 11 i couldn't complete the payment. That was because i use paypal and dont use a card for paypal.
The fact is that i dont use any type of creadit card or such, i only have a bankcard that i dont leave out for web buys. That is why i have used Paypal for such transactions.
Auslogic is so far the only company that tells me i need to have a card connected to my Paypal account.
The thing is as you demand that customers must use a card you are actually promoting some people to find a cracked version for Boostspeed 11 and use that. you are loosing out on sells by refusing to let people use paypal straight as it is.
Anyway, i hope you all have a nice day and take vare of yourselfe.
Mikael
changing language
Hello
I updatet to boost speed 11 a couple of days bevor .
Is it possible to change the language into german ?
I cannot read englisch as a river is floating, i only use schoolenglish.
In boostspeed 11 there's a many stuff included, that is new for me.
I understand the window of the older version better .
greetings bottlecup
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Auto Restore to earlier date
Is there a way AL BS can be used to create a system restore point (like in windows) to an earllier date?
Chrome isn't in Volume Mixer, Windows 10
Any tips/suggestions to get the browser back to Volume mixer?
BoostSpeed
Hi,
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
Thanks,
Michel
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Auslogics not recognising my ssd
I recently upgraded my hd to a ssd..
On some pages of Auslogics it shows new ssd and capacity but on others it still shows old removed hd.
Can you advise please
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
License
Dear All,
in 2015 I've purchased the Auslogics BoostSpeed 7 Premium and shortly was released a update and the software after update asked to be paid again which I've consider to be a unfair practice.
I am asking to provide me the posibility to install the software that I've purchased since at this moment in not possible to download the software from internet.
Kind regards,
Danil
Drive error alert but the scan shows nothing
In the menu that pops up when I hover the BoostSpeed icon in the system tray there is information that I have a drive error. I have run the standard disk scan but it doesn't show any errors on any of my drives.
Should I run a deep scan?
I have decided to bother you with this and not simply run the deep scan because I have had a number of situations with various computer equipment that could be descrived as "unlucky" and I am reluctant to do anything that isn't necesarry to my system.
Kind regards,
Konrad Wozniak
Displaying wrong color/crap in photos
Hello
After using boost speed I discover that my paintshop pro and canon software dont display photos properly.
As you can see in attached file it is totaly wrong and also on canon.
I have done a complete reinstallation af paintshop pro according to advice from corel and it didn help.
So boostspeed has done something, but I dont know where to restore from.
Please help.
Thanks
Regards,
Erik
WiFi keeps disconnecting
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
My system repair data
I bought your Boostspeed 11 and let it have its way. But now all my system repair data are gone.
???
Regards,
J.P. (Jan) Clifford
problem after running resolve all issues early this morning
Auslogics BootSpeed 11の設定をdefaultに戻す方法を教えて下さい
Auslogics BootSpeed 11を使い始めてまだ1週間程度ですが、あまり知識がないのにいろいろな設定を自己流で行ったので、これが最適な設定か分からなくなりました。
そこで、いちど設定をデフォルトの出荷時状態に戻すほうほうを教えて下さい。設定は再度考えて必要最小限に戻すつもりです。
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
pc unplugged ac adapter pc shuts down with battery charged at high percentage
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
Can't install update
On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
cannot open links in OUTLOOK
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
My Windows 10 Pro version asks for activation
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
New in blog
See allRecommended
DOWNLOAD NOW
Download size: 12,8 Mb