Добрый день! Насколько безопасно обновление драйверов не с официального сайта корпорации Dell? Не будет ли нанесен какой-либо ущерб в связи с обновлением ПО и дрйверами?

Hi Guys

Ive entered my Lisence code but my BoostSpeed 12 is still asking me to Activate Pro Version. i.e the green button "Activate Pro Version" is still there at the bottom right of the window..

Tom

my num lock keys does not wotk after first scan. Windows tell that I switch between num lock activate and deactivate but the number keys stays inactive. my keyboard is a logitech CRAFT and it works on a different pc.

Gentlemen,
I have Windows 10 64 bit. I have 1.69 TB free space of 1.81 TB. Do you think I should wipe the free space or would it just be a waste of time?

Doug.

Why is my fan constantly running? Is there a way w/ your tool to know if it is due to a bugged process? The vents appear clean.

Your Auslogics license information, order #

Ich nutze AusLogics Boost Speed schon sehr lange - mit obigem licence key lässt sie sich nicht aktivieren.

Was ist das los - auch löschen und Neuinstallation hat nichts gebracht.

Mfg

Decker Gustav

All my picture files used to disply thumbnails, now just icons.
How do I restore?

I have two WD 3.6Tb external USB3 drives for backups and storage. These are both deffo HDD! I have discovered that they are TRIM enabled ... BUT, you don't trim HD's, do you??? I have had had trouble with them in the past due to increasing slowness and defragmentation. Sometimes Defrag Ultimate just couldn't finish a HDD defrag or gave up and stood still, but didn't crash either! Defrag Ultimate treats them as HDD's, but I am wondering if actually SSD Trimming them and then HDD Defragging them might solve or reduce my problems. But, I don't want to try this if I am going to damage them. So how should I treat them generally and within Defrag Ultimate

Confused.

Simon F

Why has Windows started to refuse access to my newer version of Defrag? I have had to take it off my laptop and reinstall an older version to attain use of my perfectly safe and legitimate copy

Доброго времени суток, уважаемые специалисты!

Спасибо за возможность задать Вам вопрос.

В моём ноутбуке - операционнная система WINDOWS 7; она была переустанавлена специалистом в январе этого года после профессиональной чистки системы.
Есть вопрос об ошибке, номер которой есть на скриншоте вложения, сделанном при внезапном отключении ноутбука во время обычной его работы. Такое внезапное отключение моего ноутбука случается неожиданно, всегда без всяких предварительных каких-либо признаков; при этом на экране висит текст с номером ошибки, который видно на скриншоте.

Что значат такие внезапные отключения? Как предотвратить такие отключения, что исправить в системе?

С уважением, Ана

Bonjour,
Ou puis je trouver mon compte
Merci d'avance
Hendrik Zutterman

Как и что лучше всего почистить системный диск. Уже занято более 100ГБ. Все документы/временные файлы/загрузки уже перенесены с диска.

after using auslogics it says disk has errors . CAN THIS BE FIXED WITH AUSLOGICS

Comment augmenter la grosseur des caractères, pour les rendre plus lisibles.

Hi

Cool software and company. Thanks for your time.

Someone mentioned I should use this, but also said, in accordance with info online, that "defragging" an onboard SSD will cause issues. I'm directly confused by this and would appreciate some guidance on what is correct here.

Thanks again.

Hello,
I had some problems installing Win 10 updates. The problem keeps recurring and I would like information from your support.
You may find this error code helpful: (0x80080005), which is the message that keeps popping up:
The device is missing important security and quality patches!
Regards,
Valentin Batalak

USBと無線機をつないでます
マイク．．スピーカーのドライバー（オ－ディオ）サウンド
認識してくれません
とエラ－メッセージ．が出ます．

よい知恵を貸して下さい．

How do I avoid the manual suspension of Malwarebytes that does not allow Auslogics software to install due to identfying it as a PUP?

Every day, I start the day, running Advanced System Care, then Glary Utilities, then WiseCare 365, then Auslogics Bootspeed 13, the I reboot and then run ASC again. I have been doing this now, daily, for over 3 years (updating as they are made public). 1st run of ASC... I find privacy issues and then delete them. With Glary's... I run (in Advanced) their "Erase history" under "Privacy" multiple times until I get "Zero" issues found (sometimes up to 15 times to get a zero response). Then I run WiseCare, multipl times (usually around 6 times (main page) and then Under "System Cleaner" I usually only run each section once... sometimes though I run the "Advanced Cleaner" a few times, each time returning a different number of files found and cleaned... but never getting a "zero" found result. NEXT is Auslogics Bootspeed 13 (AB13) I run the main screen, cure the findings... and then I run the "privacy" scan again... and I have done this up to 30 times in a row. The important thing hereis... each time returns a number of files found that is different than the previous time AND there is no pattern to the numbers returned either!

Looking at the past, the Neuroquila virus (circa around 1995) was the first (as far as I know) "polymorphing" virus. It created a "sacrificial virus" to "feed" any existing antivirus program on a machine so that while the antivirus was repairing the created virus the real virus could then attack the antivirus, making it, in the future, always retrun a "no virus found" message to the user. Next, as I recall... comes the concept of "nesting" where when you remove one thing another is created as that one is eliminated.

the above are just 2 examples of why I could be getting the results, daily, that I get BUT... I have stopped these programs after just doing an initial run of each and I have, many, many times stopped them short of doing an all out cleaning and I have done many "all out cleanings" (where I run each program multiple times) and there is a large difference in my end performance of the machine. PS... I do this on all 3 of the machines I have running and NO... I am not making money with my computers... I am a 71 year old man who's retired and od this for cheap thrills and to prove I haven't yet lost my sanity... thank you very much.

Sooooo.... I'd like to buy your program... but only if there's a component in it that let's me state how many times each component within it will run before it stops running.... cause sitting here and re-running these programs for over an hour everyday... just to keep my computer operating at a decent speed (2-I.7... 16 GB Mem, 500 GB SSD, 1- I.5 ... 16GB Mem, 500 GB SSD).

What I want is something I can configure to run multiple passes of the different compnents within your software so I can set it and then go do something else while it scours, re-scourts and rescours again as many times as I want it to.

Cool?