1859 questions

I am not getting full gigabit speed on only my computer.

Hello all, happy holidays!

Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.

I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point

1224 views
Dec 27, 2019 at 02:53 AM

My Gmail account in Windows mail won't send.

Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George

1440 views
Dec 25, 2019 at 07:43 AM

cannot delete HKEY Acronis

Cannot install/activate Acronis s/w due to Registry problem

4972 views
Dec 24, 2019 at 05:54 PM

System Scan

When I am doing a system scan the scanner takes almost 30 minutes or more when it gets to temporary files. Is there something I can do to speed this up?

965 views
Dec 23, 2019 at 12:55 PM

Не получается запустить.

Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)

1354 views
Dec 22, 2019 at 10:39 PM

Windows upgrade

Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?

Regards
Petar

1334 views
Dec 19, 2019 at 08:58 AM

BSOD

I have new core i3 4130 with 500gb hard disk and 8 gb ram with all drivers updated but my windows crashes frequently I have scanned the whole pc no virus found then why is this happening?

1421 views
Dec 19, 2019 at 07:52 AM

slow computer.

hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri

1133 views
Dec 18, 2019 at 04:01 PM

Transfer of Auslogics boot-speed and main question about my current laptop situation

Greetings Aus Q,

Go ahead and ding me if this is perceived as more than one question.

Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.

Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.

A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?

B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?

C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?

D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.

Thank you,

Jim Copeland

Content hidden to protect privacy


978 views
Dec 14, 2019 at 09:57 PM

Bluetooth not working

Bluetooth isi not working. Please suggest remedial measures to resolve the issue.

1738 views
Dec 14, 2019 at 03:30 AM

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it

Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?

1176 views
Dec 13, 2019 at 07:36 PM

Google Drive File Stream Stops Working

How do I prevent BoostSpeed from interfering with Google Drive File Stream? Each time I scan, I lose connection to the Google Drive File Stream and have to uninstall and re-install it.

943 views
Dec 12, 2019 at 02:08 PM

Defragment

How to do offline defrag of system files

1305 views
Dec 12, 2019 at 06:23 AM

Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web

Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович

1082 views
Dec 10, 2019 at 03:49 PM

please solve driver problem

my computer show unknown device please solve driver problem

1023 views
Dec 10, 2019 at 02:05 PM

Minecraft

modを使ってマイクラを楽しんでプレイしてるんですが、最近forgeを28.1.76から最新のものに変えたら、起動するんですがメニュー画面まで行かなくなりました。
どうすればいいのでしょうか?
いちおう、エラーログを添付しますので教えて下さい。お願いします。

1106 views
Dec 10, 2019 at 05:25 AM

File transfer software

I thought you guys offered a file-transfer system a while ago. Or am I mistaken?
I want to send a 300 MB video to a colleague, but could not find any reference in the main menu to do so.

1798 views
Dec 10, 2019 at 12:05 AM

Computer freezes up

One of the reasons I purchased Ausilogic is to help me with performance. My computer freezes up for 10 seconds or so every few minutes. I don't know if hardware is failing, if there is a miscatch among compenentry.
How can we use your products to solve it.
So far, I haven't been able to eleminate this problem

5154 views
Dec 09, 2019 at 03:58 PM

How can I keep my pc secure

When updates for win 7 stop, how can I keep my computer safe please. I don't want to upgrade. Thanks.

1142 views
Dec 09, 2019 at 03:34 AM

загрузка игр и приложений

Перестали загружаться приложения и игры из магазина.

722 views
Nov 17, 2021 at 02:41 PM

Windows 10 Pro Licencia Retail - No actualiza versión 21H2 - Error 0x800f0922

Recientemente adquirí Licencia Windows 10 Pro.
Introduje el nuevo código de la Licencia en Actualización y Seguridad/Activación/Cambio de licencia.

Regularmente la Actualización solicita Reinicio.
Cuando se lleva a cabo sigue los pasos de Descarga, Instalación, luego Reinicio.
Durante el Reinicio la pantalla deja ver:
"Buscando actualizaciones", "Instalando" (se ve la evolución porcentual) y cuando casi llega a 100%; "No pudimos instalar actualizaciones", "No apague el equipo"
Luego Reinicia nuevamente y se repite lo mencionado.
Y finalmente abre la pantalla de presentación Windows.

Al revisar de nuevo el menú de Actualizaciones, aparece error 0x800f90922.

Aunque ejecuté diversas operaciones (vistas en Youtube), ninguna me dio resultado.

Es posible su ayuda para solucionar éste problema?, por favor.
Gracias! - Saludos
720 views
Apr 16, 2022 at 06:54 PM

HP Envy Desktop 23 No audio devices after windows 10 update

Hello,

Potential new customer here.

My HP Envy desktop has no sound and can no longer find an audio device installed after a Windows 10 routine update.

Any ideas?

Thanks
720 views
Oct 14, 2022 at 08:06 PM

Fehlermeldung beim Start von Auslogics Disk Defrag Ultimate

Hallo,
mein Rechner bringt mir beim Start von Auslogics Disk Defrag Ultimate folgende Fehlermeldung:
"Ein Administrator hat die Ausführung dieser App blockiert. Weiter Informationen erhalten Sie vom Administrator"
Nun bin ich aber der einzige Benutzer an diesem Rechner, also Admin.
719 views
Feb 27, 2022 at 09:46 AM

letters are very thin -hard to read

Dear Sir/Madam
After optimization the letters on facebook or on internet websites are vey thin and hard to read. How do i return back to previous settings? Its very difficult to read text/comments on web

How do i revert back changes
I have attach a typical page with current letter style. Can it be made more visible ? not bigger just more clear

Thank you
Andreas Y
719 views
Apr 17, 2022 at 09:46 AM

BoostSpeed wipes out VS2022 install data

Whenever I run the Boostspeed scan it wipes out all indication of my VS2022 installation. After the Boostspped run Visual Stuio VS2022 installer states there is nothing installed. Must restore with backups.

Please advise.

718 views
Apr 12, 2022 at 12:02 AM

Windows 10 not shutting down, keeps restarting

When I shut down (even Shift + shutdown or hibernate) the computer (i5-4460 with 16 GB Ram, ASUS H97m PLUS) the PC instantly reboots. Have to do hard shutdown with power button.
I have tried a few "fixes", e.g.
In Startup and recovery, used "Restart" for clean start,
Start in "Safe Mode",
Untick "Automatic restart",
Removed or substituted all devices, hard drives plus mouse and keyboard, even monitor and RAM, except Graphics card - no fix. Defragged and scanned hard drives for errors.
Pressed power button with power disconnected.
Re-installed Windows and updated.
All fans and heatsinks not clogged with dust.
Edited Registry = "No Auto Reboot With Logged On User"!

I have recent system images saved but none before the problem started!

Any suggestions? Thank you, David
717 views
Apr 07, 2022 at 07:31 AM

sleep mode

How do I disable sleep mode?
716 views
Jun 25, 2022 at 05:51 PM

Notification for "Safe to Reove"

safe to remove notification does not come on screen when usb devices are removed?
715 views
Mar 06, 2022 at 11:07 AM

Allow list

What do I have to add to Malewarebytes "allowed" list to get your software to run? If I run Malewarebytes it quarantienes your application.
715 views
Jul 06, 2022 at 11:39 PM

Error

How to remove the error? I can't start Auslogics on Windows 10 startup.
713 views
Jan 09, 2023 at 09:23 PM

sound in windows 11 alway from small to big when i play video

The sound in windows 11 alway from small to big when i play video, mp3, and on youtube also, evanthough when i pause for awhile and then I play it also happen the same problem. It disturb me a lot
Could you please help me. Thank you so much
713 views
May 15, 2023 at 01:13 PM

programa ya instalado

Tengo instalado el software BoostSpeed 13 en mi portàtil.
Cada vez que inicio sesion aparece un mensaje dandome opcion de descargar nuevamente el programa que ya tengo actualizado.
Ruego me indiquen que ocurre.
Muchas gracias.
712 views
Dec 05, 2022 at 11:53 AM

After using Auslogics Boot Speed 13 (Pro) and restaring the Windows, the screen becomes black.

Hi there,
After using Auslogics Boot Speed 13 (Pro) (scan, regedit, clean, regdefrag, disk defrag, window slimmer, internet optimisation) and restaring the Windows, the screen becomes black in a few minutes. It is possble to change open windows by Alt + Tab. Ctr + Alt + Del can recall Task Manager. But the screen is black, it is not possible to see a wallpaper, call Start menu, task bar is invisible as well. Only restart the system helps, can I fix it in another way, please?
Thank you.
Richard.
712 views
Aug 19, 2023 at 07:07 PM

About BoostSpeed

Sorry about the bogus Subcategory- apparently I cannot send without one but BoostSpeed is not listed.
I want to set the program so that it does NOT wipe form-fill information from Firefox. I have been cruising through the settings but I don't see a way to do it.
711 views
Jun 05, 2022 at 09:12 PM

Uso de anti-virus

Com Win11 e Auslogics preciso usar anti-virus?
711 views
Jul 13, 2022 at 01:29 PM

Microsoft activation request when there is already validated OEM version on laptop

How to resolve Microsoft activation request when there is already validated OEM version on laptop, and entering the product key that the Auslogics system ionformation report shows as being the valid key for my Win10 install.
711 views
Mar 12, 2023 at 07:56 PM

mistakes

Why does ABBYY FineReader 14 make mistakes in characters when scanning large and clear printed text without interference?
710 views
Jun 05, 2022 at 09:06 PM

hardware suggestion

i have bought a dell AIO recently wuth i3, 8 B RAM and 1 TB HDD. i find it sluggish. What hardware changes i must do to make it more resposnsive ? Should i install 256 B SSD or additional RAM or both
709 views
Jan 29, 2022 at 07:35 PM

Bootspeed 13 Pro | x64 version

Hello,

This is not a issue, it is a technical question about Bootspeed version availability.

I have recently installed a free version of Bootspeed 12 in my home computer. It is a nice-to-have product but noticed that it is a 32-bit version. Is a x64 PRO version also available?

Even if this is not the case, will the upcoming product version (Bootspeed 13 PRO) have a 64-bit version?

Thank you.
Best regards

Jorge Ambrosio

PS: My installation OS is MS Windows 10 Home, x64 version, with Intel i7 CPU, and 32GB of RAM.
708 views
Oct 26, 2022 at 10:28 AM