1899 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1551 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1303 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1519 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1265 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1472 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1541 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1369 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1352 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1292 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1372 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1822 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1501 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2982 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1420 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1752 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1595 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1080 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1514 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1497 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1472 views
Apr 16, 2020 at 08:42 AM

Recovery

как восстановить файл ( несохранёный файл в Microsoft office) удалённый вашей программой ?
374 views
Jun 04, 2024 at 02:10 PM

no se activa el bluutoo

el blutook no se encuentra en este dispositivo y quisiera activarlo
374 views
Jun 05, 2024 at 10:05 PM

Lost files in Downloads folder ????

I've just done a action in bootspeed 13 after I downloaded update and it has wiped out ALL my files in my windows downloads folder so I am not very happy with this !!!! Is there anyway that I can recover these files ???? I'll leave my laptop switched on in the hope that I can get an answer from you to assist me in this recovery of the many files I have lost/
Thank you John Blair 10.31 UK time on 04July24.
364 views
Jul 04, 2024 at 09:31 AM

Use of optimizing tool

Greetings
I have a aquestion the Optimization tool I notice that when you click on it a bunch of sine wave patterns show up. Well what is the meaning of all this and how do I use it?
362 views
Jun 15, 2024 at 02:26 AM

start up automatic repair comes up which keeps coming up forever

I have a problem with every time I start up automatic repair comes up which keeps coming up forever if I don't click F8 and click Disable forced Driver Signature! After I click F8 windows starts up and runs normally. what do i do this problem? Can you help me? Hope you have a solution for me.
With best regards
Peter Hansen

Content hidden to protect privacy

362 views
Jul 06, 2024 at 10:06 PM

Missing volume control icon

The volume control icon found missin on the taskbar. How to solve this?
359 views
Jun 05, 2024 at 11:15 PM

Internet speed settings

Its really hard to believe that the internet speed settings for 5Mb/s are the same as for 900+Mb/s. And what about using AI inthis application?????
358 views
Jun 14, 2024 at 01:35 PM

MS Constantly changes default brower and search engin

I am econstantly having to replace the default browser and search back to Chrome & Google becaseu Microsoft changes them to Edge & Bing.
Is it possible to control this in the Registry?
348 views
Jul 21, 2024 at 08:21 PM

New download won't run

I downloaded the suggested new Auslogics Disk Defrag 11. Now it won't run. It says "The execution cannot proceed because AxComponetsVCL.bpl was not found. Reinstalling the program may fix this problem".

Not very happy about this.
Since I just completed "downloading and installing" the updated version, how the heck am I supposed to accomplish this?

How do I get back to the Defrag that worked?
339 views
Jul 04, 2024 at 04:05 PM

Perte souris et pavé tactile sur ASUS R702U

Bonjour,
A l'occasion d'une mise à jour des drivers, (Windows 10) la procédure s'est bloquée.
j'ai dû arrêter mon portable (CTRL ALT DEL).
Au redémarrage plus de possibilité de valider une action.
Plus de pavé tactile, plus de souris !
Comment pouvoir ré-utiliser mon portable ?
Je vous envoie cette question de mon poste fixe
Comment choisir une langue de contact par défaut; mon anglais est scolaire et ancien.
Merci de votre réponse.
Cordialement.
R CHAUVET
338 views
Jul 02, 2024 at 06:50 AM

BSOD

how do I update driver for tcpip.sys
336 views
Jul 21, 2024 at 12:35 PM

Dateiwiederherstelung

Ich finde die mit Auslogics BoostSpeed 13 wiederhergestellten Dateien auf meinem Computer nicht.
331 views
Jul 02, 2024 at 12:05 PM

Recherche de logiciel

Quels logiciel gratuit me conseillez-vous pour rendre mon PC plus performant rapide et un bureau attrayant
329 views
Jun 27, 2024 at 11:27 PM

Duplicates

Want to trachk down duplicates
328 views
Jun 26, 2024 at 02:46 AM

windows update

Update Stack Package - (Version 922.415.111.0)
326 views
Jul 19, 2024 at 02:55 PM

There is no Chinese in the language options

Chinese is not currently available in the language options. I kindly request your team to consider adding Chinese to the language library.
325 views
Jun 22, 2024 at 04:18 AM

PC shuts off

Why does my pc randomly shut off its not over heating because the temp says its fine and when turned on cpu and vga red light turn on and off
323 views
Jun 25, 2024 at 10:28 PM

Lost MBR?

I have about a dozen 2.5" & 3.5" SATA HDs, no bigger than 4TB that I have been using for years without issue. They are used in conjunction with via a WAVLINK eternal docking station, holds 2 drives" to USB. Recently, one HDs, 3TB one, when I tried to use it, I got an error message, "invalid parameter", "drive is not accessible or corrupted" or something like that. So I used the DSK command in Window 11 and it showed up as a "healthy drive" but showed up as "RAW" (needed to be formatted basically of course) instead of NTFS as it should be. I took this situation to be a fluke but just now, with two 4TB drives in at the same time in the docking station, the same thing happened TO THEM BOTH. I had them connect to my laptop for several hours then suddenly got the "drive not accessible" error.  Same issue as before basically and back to RAW. Correct me if I'm wrong but does this very likely indicate that the docking station is creating this problem all of a sudden? It's either that or my laptop is sending something out to the drives that is causing this. Give me your opinion. My bottom question is, I'm assuming the MBR got corrupted or disappeared, of course there could be something else but it's been a very long time since I have messed with HDs on this level. Is there any way without having to send the drives out to have them professionally recovered, something I can do myself at home to re access the drives normally? Thanks in advance, Jim.
321 views
Jul 30, 2024 at 03:38 AM

computer freezing a lot

I was having a lot of problems with programs and browsers closing, after I installed auslogic, it improved, but I was afraid of it being some deep virus, how can I know, I have the antivirus, but I still have my doubts, because the PC gave a improved, but you will know
310 views
Jul 12, 2024 at 09:16 AM

lins aus newslettern u.ä. gehen nicht mher

Boostspeed scheint alle links aus nwslettern u.ä. deaktiviert zu haben - ich kann so nicht mehr arbeiten. Wie reparieren?
310 views
Aug 13, 2024 at 12:44 PM