System Protection Blocking the BootSpeed.
Boost speed does not recognise pro
Auslogics Blocked by User Account Control
Please can I ask for your help as I cannot access my Auslogiccs BoostSpeed 12 on my computer? I get a flagged message that User Control Account has blocked access.
Can I take this opportunity to wish you and your colleauges and families a great New Year.
Kind regards
Trevor
completed (order number: 3088xxxxx).
i cannot start boostspeed. they say its for my safety. i do not understand this
C:\Program Files (x86)\Auslogics\BoostSpeed blocked by integrator
Auslogics BoostSpeed12Proか゛認証されない
本日2022.01.21Gingから追加購入しましたが、ライセンス認証はされますが、何度してもライセンス認証されても【Pro版】に成りません
１.購入日：2022.01.21
2.製品名：Auslogics BoostSpeed12Pro(3PC用）
3. ライセンスキー 【
Boost speed does not recognise pro
Colin Summerfield
Product will not activate
I've entered the product key now 3 times. each time it is accepted. when I go to run the 1st scan I see on the bottem right corner of the screen that boostspeed stills needs to be registered and then I reseive unexpected error. I just updated to 12 for my client - Produce key -
administrator blocked auslogics
Kind Regards,
Michael Figueroa
Integrator.Exe wird von Windows geblockt
"auf einmal" ist BoostSpeed nicht mehr registriert (keine Pro-Version mehr).
Wenn ich den Registrieren-Dialog ausfülle mit meinem Linzenzschlüssel, erscheint zwar die Meldung das BoostSpeed registriert wäre, der Button unten rechts verschwindet nicht.
Daraufhin dachte ich, ein Neustart von BS würde das schon beheben, allerdings erscheint dann die Meldung, dass die App aus Sicherheitsgründen blockiert wurde (siehe Anhang).
Wie bekomme ich mein Boostspeed wieder voll registriert?
MfG,
P. Kaatz
Windows Update, something went wrong
ホルダーが「空」になる
Analyse pour ajustements Windows
lorsque je fais l'analyse pour l'ajustement Windows , l'analyse ne va pas plus loin que 29% et puis j'attends des heures et c'est toujours à 26%.
Pourriez vous m'aider,
Cordialement
Hendrik Zutterman
right mouse click
Windows 11
Also, I have Norton Anti-virus. Are the two programs compatible or working against each other?
Browswer history
pop up for ugrade when I already subscribe to boost 12
Old Windows Versions
Why isn't it removing "Old Windows Versions?"
Updates to file finder and boost speed
Almost on a daily basis I am getting notification of duplicate file finder and BoostSpeed 12 has a new update. I click onto download, I see where it is downloading, but when I go to install the update it does nothing. It doesnt tell me it has completed installation or given me a notce that it failed. This has be going on since I puchased Logistics. I guess it is not my fault for not following up on this, since I'm not getting my monies worth.
If you could help to get the problem solved or tell me what I've been doing wrong, sure would appreciate it.
Thanks and have a Happy New Year!
Mary Jane West
Logging in to dashboard
How can i put a shortcut on Start page (or Taskbar) to log in to my Auslogics dashboard?
RDP keeps disabling on every machine that has boostspeed installed
I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.
After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.
I found this post
https://qa.auslogics.com/question/225
And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
Windows upgrade
Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?
Regards
Petar
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Проблема со спящим режимом
Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...
原因不明起動しない
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する（チカチカ。。。正常）
１分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる（現在のように）
上記の状態が前触れもなく発生する
Two issues:Text freezes and unsatisfactory settings
Also - despite my choice of most comfertable writing thumbnail - set my screen too bright with choppy text.
Please advise
Jessica
NVIDIA 제어판이 안 켜져요
NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?
Auslogics registry cleaner
Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.
System: Windows 7 Home Premium
Bad performance Windows 10
Is there anything i can do for make my pc much responsive and no slowdown? for free
everytime i open anything that using high resources (Google Chrome, firefox, editing app, another apps)
its fine, nothing slow with the google chrome and the apps
but when i closing the Apps that already took up my PC resources 70%,
the CPU and RAM usage back normal
and the windows is very very slow
like the Start Menu is Delay , File explorer slow launch (launch when 5-6 seconds)
anything i can do?
thanks
ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY
Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?
viewing bottom of page.
Start buttons etc., at bottom of page are often off the page.
taskbar is at top of screen
reducing page size ratio is no help
Please help.
Auslogics Configuration of Windows old version
I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.
Fernando Salmeron
Csnnot access new PC from other PCs on LAN
I made the new PC discoverable and not pwd-protected, just like the other three. I set up the Documents folder in the new PC to be shared by Everyone with Full permissions. All four PCs are running Win 10 (ver. 2004). All are wired Ethernet desktop PCs except one existing PC is a Wi-Fi laptop.
This situation is weird because everything works fine when I go to the Search box (next to the Start icon) on any of the other PCs and type \\NewPC\Users\UName\Documents\. The same good result occurs when I set up a shortcut targeting \\NewPC\Users\UName\Documents\.
There is no hardware/connectivity problem because the new PC is seen by all the others and I can access the shared Documents folder\files in either of the two ways just described above.
Am I missing a setting, or something else? Thanks for any help.
гибернация
Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.
Problèmes registre
Error al actualizar windows
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb