My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
Installing Auslogics boost speed
Can Auslogics BoostSteed be installed on a second computer?
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Boostspeed
Boostspeed 12 startet immer wenn Windows 7 geöffnet wird.
Wie kann man das verhindern?
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
Performace Issues
Recently, Whenever I reboot my system and run "scanner" I end up with 74 performance issues (file extension) like:
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.asf\OpenWithList
Resolve supposedly corrects the problem, as with rescan, no issues remain. They reappear after reboot!
FYI, ccClean finds no registery issues.
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
Auslogics not recognising my ssd
I recently upgraded my hd to a ssd..
On some pages of Auslogics it shows new ssd and capacity but on others it still shows old removed hd.
Can you advise please
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
I want boost speed to startup when win 10 starts
I cannot get this boost speed 11 version to create a staru up buttom to check or uncheck. So, currently I must start my pc. Then start boost spped 11 and diminish to the lower tray daily. I would like to set it to Start each time my pc is turned on automatically.
I do get a failur when I try to set this auto run featur from the settings within boost speed 11. I seaprch online and cannot find an answer.
О пояснениях к информации в Startup Manager
Здравствуйте! Программа Startup Manager выдала информацию, которую я Вам направляю в прилагаемом скриншоте. Вопрос по программе Orphaned SecurityHealth из раздела Реестр/запустить.
По имеющейся информации, производитель программы - неизвестен, рейтинг - неизвестен, существует - нет. Смотрел в интернете, нашел только описание о SecurityHealth, для которой все указанные выше характеристики указаны. Что это за программа у меня в операционной системе? Нужна ли она?
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
Microsoft Office 2013
I used your system yestrday for the first time attempting to release space on my PC.
however,what appears to have happened is that my programme has disappeared and access to all my Office files with it.
Can you undo what has happened as it is very inconvenient?
Kind regards,
Pete Davies
Empty Folder finder
I have run this a few times and it always finds new empty folders. Why does this happen? Also there are always some that can't be deleted. Again why please?
Pauline
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
BootSpeed 12 pre-purchase question
Hi,
I'm considering the purchase of BootSpeed 12 Pro, but I'd like to know if you have any usable discounts at this time.
Thanks
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Работа ключа ЭЦП (Электронная цифровая подпись)
Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).
Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!
Мой Сканер
Вопрос не о Spotify а AutoLogics BoostSpeed 12 Можно ли исправить определенные ошибки а не нажмиать Исправить Все?
New in blog
See allRecommended
Download size: 12,8 Mb