Display of Registry Cleaner
I have installed BoostSpeed on my desktop where it works fine and also installed on my HP Mini Laptop where the display resolution is limited to a maximum of 1024/800. When I want to run the Registry Cleaner the "Scan" button is out of range on the screen and therefore I cannot execute the Cleaner. I have tried everything I know to alter the size of the program display but cannot.
Is there any way to execute the Cleaner since I cannot have access to the scan button? This message was prepared from my desktop so any information sent to you is not from the Mini. I will resend from the Mini if you require.
Некорректная работа со сторонним ПО
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
How con I delete coockies selectivly in Auslogics 11
older auslogic boostspeed
dsregard " category please , nothing made sense to fit so i just picked whatever to make the forrm work
dear auslogic ... allthough this might seems milydy entertaining .. its serious ... i find my purchased boostspeed 11 very handy for some things and situations , but i still go back for boostspeed 10 for some other situations ... however * dont get ticked off now( ... for bs10 i was never licenemed ... allthough my interest for your products started thhrtr actually ... enough boutt that... sofirst i thought i just let my free tries@ of bs 10 run out and the by then mandatory buy it or get lost whould steer my to the right page.... now as mentioned first it was just mildy annoying ... now ... wanting to have apaid 10 for LOOONG its beging to feel stupid mildy put .. always being directed to get 11 .. that i allready have... so here i I am ... at the very source of the cracjer factory asking u PLEEEAAAASE .. FFS .. can i very very please tosss some coin in your direction for a LEGIT ten ... sure enough half my youth p2p ...
howver even if i got a lax mindset on piracy i actually feel strong on the issue + if you find yourself using one thing over and over its superjustified coughing up , and for bs 10 ... in all honesty i felt that wanted to for LOOONG . just been some gaps between my tring to find TEN ... alll about 11 ... so very please ausligic folks and yes might u even take 10s FULL rate even if it might be percievied @obsolete@ ... i dont care i just very much want a legit 10 copy. a totally other idea , i do batch layman stuff , minor programing so to speak... yet to master for and loops else i might gone deepr with this idea. that be .. i lie to propose this for windows slimmer.. when i go about this manually i do say lang coeds string seaches within winsxs ,soppose im french for instance .. wanna ditch ALL locales cuz... i i fucking just want the frenchones for my os , UNLESS i got a BIIIIG family >p .. so there hes like explorer search withing top of winsxs *_en-US_* and i get ALL files from that language , alll get folder with files might not tagged but safe to assume same language since found in folder. like just getting system32 root folder , gather up all lang folder there to a list , then run searches like that. unless most people surley be contentnt with 3/4 languages, and belive me when i say , its VERY noticiable gain in space getting rid of 20-25 sane shit just in jjibberish not meant for you... so why MS bundles i can understand , but why they dont trim ones mentioned to not be using down is boyond me.... well anyhow auslogic ... please write me back regard me gladly tossing coin your way for boostspeed 10 ... cuz it be veryy happy for it .. &cheers &bj;rn Sahle ,
Remote Desktop Service is disable by some process
My IT department believes some way the Auslogics BoostSpeed 11 software is disableing the Remote Desktop Service. I work from home offten and I need to connect to this PC to develop and technical support of our users. How can I find if your application is changing the service to disabled?
Can't install update
On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.
Please open "Screen Shot" of error.
Thank you for your help in this matter.
Long Time Auslogice Customer
Приветствую уважаемые! Во-первых:после оптимизации жёсткого диска"С" SSD c ОС , диск перестал открываться в предварительной программе запуска(BIOC) Windows 10 pro версии 1903, прекидывал диски местами результатов нет " Мёртвый" подскажите как его реанимироваь??? Пришлось записывать ОС на обычный жесткий диск. В цело мне ваша программа нонравилась - поддержка обяного жесткого диска значительно лучше чем другие...
добрый день, как ваша система моет навредить компьютеру или системе, она внесла изменения на пк отключила достуа к микрофону и камере, но я включил, я попытался сделать востоновления виндоус но очень долго востонавливаетет реестьр, я так и не дождался и перегрузил пк и теперю боюсь что ваша программа внесла изменения и придется переустоновливать виндоус, что делать, так вроде вск работает, как проверть, правильно ли работает щас система? спасибо
in which languages is auslogics available?
I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.
Is there a setting in Auslogics BoostSpeed that might affect that VPN?
I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.
Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.
Whenever I use the tools (scanner, cleanup), afterwards I always have to do a repair (reinstall) of my Office 2016 products. How to clean my computer without messing up Office 2016?
When i wanted to pay for Auslogic Boostspeed 11 i couldn't complete the payment. That was because i use paypal and dont use a card for paypal.
The fact is that i dont use any type of creadit card or such, i only have a bankcard that i dont leave out for web buys. That is why i have used Paypal for such transactions.
Auslogic is so far the only company that tells me i need to have a card connected to my Paypal account.
The thing is as you demand that customers must use a card you are actually promoting some people to find a cracked version for Boostspeed 11 and use that. you are loosing out on sells by refusing to let people use paypal straight as it is.
Anyway, i hope you all have a nice day and take vare of yourselfe.
I updatet to boost speed 11 a couple of days bevor .
Is it possible to change the language into german ?
I cannot read englisch as a river is floating, i only use schoolenglish.
In boostspeed 11 there's a many stuff included, that is new for me.
I understand the window of the older version better .
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Auto Restore to earlier date
Is there a way AL BS can be used to create a system restore point (like in windows) to an earllier date?
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?
One Click Scanner
The former version of BootSpeed -one click Scanner was running much faster that the new one (version 11).
Is that logical ?
(forget the hereabove Subcategory)
Hello, i cant find a "Language" button to change it. Help me pls
Hi when ever I check my computer with malwarebyte it detects my bootspeed as a problem. it deletes bootspeed. Have you come across this problem? How do I fix it?
Japanese IME Not Working After Using Auslogics Boost Speed
As it says on the title - after using Auslogics Boost Speed to clean up my computer, my Japanese IME stopped working. The options to input using the various keyboards disappeared and reinstalling the language did nothing. Restarted my computer, tried fiddling around and it won't come back. I've attached a picture of how it should look normally and how it looks now. Any help with getting it back would be appreciated.
How can I move "BootSpeed 12" to clean up my wifes computer?
booster 11 for windows 10
i downloaded the booster 11 for windows 10.
the booster 11 shows as 32 bit. ideally i need a booster 11 64 bit.
i am using windows 10 on a 64bit system.
do i have to reinstall for booster 11 for 64 bit. if so, can you send me the link as it just auto-downloads the 32bit.
another questions is i have anti-malaware and everytime i shut down the computer and restart the next day, i have to reinstall all over again.
is it because of my anti-virus norton that i use? can you assist me on that as well.
I have asked this question before and the help I got didn't help one bit.
The Dashboard keeps popping up at the most inconveniant times to the point of be annoying.
When the Dashboard pops up everything stops until I acknowledge it or close it.
It always pops up while I'm gaming, while working with photos, reading my e-mail, and even while I'm working with my annimation programs and interfears with anything else to the point I'm beginning to think you created a virus program.
This has got to stop.
The other previous versions never did this and Im not the only one having the same problem.
I have several friends and family members I talked into buying this program who are having the same problem with theirs also.
Thats Seven (7) people besides me who are about to ask for refunds if we can't stop the Dashboard popups.
I have tried everything I could find from unchecking notices to automatic maintinance and the popups still continue.
Even the suggestions you gave me didn't help stop the pops.
Our 60 days is coming up on the 17th of this month for asking for our refunds.
Help us or refund us.
Thanks again, I think,
Taboptimizer is causing a 32 bit program to crash
How do I disable Taboptimizer in BoostSpeed 11. I have verified that is is a program in the BoostSpeed directory on the Windows 10 computer. If I do not run BoostSpeed, then I do not have the problem. I can send crash logs if that helps. I would rather just disable Taboptimizer or not use it.
software is slow
How do I increase memory resources to a particular progam/software using auslogics
Use of BoostSpeed Pro 11 on my wife's computer
8 November 2020
Dear Sir or Madam:
Could you please tell me if I can use my BoostSpeed Pro 11 on m wife's computer, and if so, how do I do it?
I look forward to hearing from you.
Windows 10 logon password via Auslogics
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager
Richiesta di un consiglio
desideravo un Vs. consiglio:
sono già in possesso di Auslogics Disk Defrag 9.
Per migliorare in generale le prestazioni del mio computer sono indeciso se acquistare:
A) Driver Updater
B) BoostSpeed 11
domanda: BoostSpeed 11 include già anche Driver Updater ?
... non vorrei acquistare programmi uguali ...
Cosa mi consigliate di acquistare? Driver Updater oppure BoostSpeed 11 ?
Grazie e un cordiale saluto.
Virus ID'd as trojan in the deepscan exec
It is ruining my use of Auslogic to keep my computer clean and optimized. This 'trojan' apparently slows all the performance and my web browsers! Do you all have a fix. I had reinstalled once and still had the problem. Now, my auslogic is not doing its job in cleaning 'junk' from my drive! Got any solution?! The file was deleted by Kaspersky!
Не запускается Aslogics BoostSpeed
Добрый день, приобрел годовую подписку на Aslogics BoostSpeed 11. На компьютер и ноутбук установилась нормально и отлично работает (система Windows 10). Но на второй ноутбук установилась с трудом и не запускается, при запуске вылетает окно (принтскрин во вложении). Скачивал с сайта и переустанавливал несколько раз - не помогает, программа не запускается. Система Windows Vista Home, ноутбук ужк возрастной.
stop removing saved information during cleanup
how to keep boostspeed from removing my passwords and form data information from edge browser. I saw it once, but like everything, I cant find it now (LOL)
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
Thank you so much for your support.
Alex Janssens (Iepenburger)
What about Bootspeed 13? Is it possible to do somethings to have Bootspeed 13 in place of Bootspeed 12 without payement?
Auslogics Notice: High System Resource Usage Detected"
I continue get an Auslogics Notice when signing on to my computer which reads: "High System Resource Usage Detaected... you may experience extreme PC slowdown". Is there anything I can do to alleviate this warning? If so, what can I do and how do I do it. Thank you for responding.
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Auslogics softweare Goods normal or better other brand name Goods
BoostSpeed actions on Windows 10 Shut Down
I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.
My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?
Regards, Harry McBride
Logging in to dashboard
How can i put a shortcut on Start page (or Taskbar) to log in to my Auslogics dashboard?