My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
Installing Auslogics boost speed
Can Auslogics BoostSteed be installed on a second computer?
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Boostspeed
Boostspeed 12 startet immer wenn Windows 7 geöffnet wird.
Wie kann man das verhindern?
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
Remote Desktop Service is disable by some process
My IT department believes some way the Auslogics BoostSpeed 11 software is disableing the Remote Desktop Service. I work from home offten and I need to connect to this PC to develop and technical support of our users. How can I find if your application is changing the service to disabled?
Unable to uninstall application using Uninstall Manager of Boostspeed 11
I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).
I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?
boostpeed 11
I've uninstalled and reinstalled boostpeed 11 four times now. Is there a bug on the task scheduler. it's kee[s crashing the program. and I have to manually start the maintenanace daily now.
iphoneの件
iphoneのバックアップを取る為、itunesにてバックアップを取るが。本商品でクリーンアップするとバックアップが消えてしまう為、バックアップ情報が消えない設定は教えて欲しい。
Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web
Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович
Latest BoostSpeed Version
This is becomming annoying. I keep getting alerted that a new version of BoostSpeed is available. I've downloaded 12.0.0.2 and ran the installation which prompts that it is removing with re-start and then I have to manually install the latest download. After three successful runs with this I still end up with version 12.0.0.1 What gives?
Error mesage
I recently installed Microsoft Office 2019 on my Win 10 computer. Each time I use your Bootspeed 11 software, and when I access my Office 2019 software, I get an error message "Operatng system is not presently configured to run this application". What can I do to correct this? I am reluctant to use Auslogics software if it continues to prevent me from accessing my MS office software. Please advise. Thank you.
bootspeed 5
I have bootswpeed 5 on windows 7. I recently purchases 11 for other windows 10 computer.. I downloaded 11 on windows 7 and now have access to bootspeed 5 and 11 on this 7 computer. Revo uninstaller does not show 5. best way to uninstall bootspeed 5? thanks, jimz
Pop-Up Product Sales Window
Hi-
I just recently purchased your Bootspeed system--which is great and full of great features that I typically have to buy many programs to do. I keep getting an ad pop-up to buy your other products and when I check off DON'T SHOW AGAIN, it just does that. It's annoying and a turn off..
Thanks,
Steven
Недопустимое значение реестра при попытке открыть JPG файлы
Здравствуйте!
Не могли бы помочь со следующей проблемой.
После сканирования и устранения ошибок программой BootSPeed при попытке открыть файлы JPG кликом мышки появляется сообщение "Недопустимое для реестра значение".
Спсибо,
Валерий.
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
Error Message
Greetings,
Please open "Screen Shot" of error.
Thank you for your help in this matter.
Long Time Auslogice Customer
V/r
J. Aguero
Updating to the newer software
Everytime I try to update the software, it goes through all the steps, but does not do the update. It continues to show the original version and reminds me to update again. I have tried this about 10 times with no success.
Fix Windows update error code 0x80073712
How do I fix Windows Update error code 0x80073712 using your BoostSpeed 11 software on my Windows 10 Pro computer. Your article on fixing this error code said you could repair is problem with your BoostSpeed 11 program.
Thank You.
VPN FortiClient
I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.
Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.
I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.
Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.
IMEがスキャン後停止する。
Windows10のinsider Programに参加しています。 Boostspeed10を1年半ほど使っており、Win10 build188xxごろまでは問題がありませんでした。ところがそれ以降のビルドから、IMEが無効になるようになり、Windows のバグかと思っていました。
ところが、ふと思いついてBoostSpeedのスキャンで削除したファイルを戻すと、IMEが復活しました。 Windowsのアップデートの際にBoostspeedとバッティングするような変更があったのかもしれないと思っています。
今、Boostspeed11を使っており、システムにかかわる項目を大幅に外して使っています。
いつも使うのは クリーンアップと保護です。
トラブルはIMEだけですので、IMEにかかわる項目だけ外してスキャンしたいとおもいます。
クリーアップ・保護の項目で外すべきものをお教えください。