Auslogics not recognising my ssd
I recently upgraded my hd to a ssd..
On some pages of Auslogics it shows new ssd and capacity but on others it still shows old removed hd.
Can you advise please
High Resource Usage Detection
I keep getting a High Resource Usage Detection message even when I haven't got a lot of programmes open, and my laptop gets very hot. I have looked through Auslogics Boost Speed 11 Menu but can't seem to find a tool that may help with this.
Could you please advise which tool I should be looking to use in order to put this problem right.
License
Dear All,
in 2015 I've purchased the Auslogics BoostSpeed 7 Premium and shortly was released a update and the software after update asked to be paid again which I've consider to be a unfair practice.
I am asking to provide me the posibility to install the software that I've purchased since at this moment in not possible to download the software from internet.
Kind regards,
Danil
Displaying wrong color/crap in photos
Hello
After using boost speed I discover that my paintshop pro and canon software dont display photos properly.
As you can see in attached file it is totaly wrong and also on canon.
I have done a complete reinstallation af paintshop pro according to advice from corel and it didn help.
So boostspeed has done something, but I dont know where to restore from.
Please help.
Thanks
Regards,
Erik
Taboptimizer is causing a 32 bit program to crash
How do I disable Taboptimizer in BoostSpeed 11. I have verified that is is a program in the BoostSpeed directory on the Windows 10 computer. If I do not run BoostSpeed, then I do not have the problem. I can send crash logs if that helps. I would rather just disable Taboptimizer or not use it.
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Kaspersky will not run
Following the registration of Boostspeed 11, when I try to run my Kaspersky Total Security scan it stops at 1% and will not scan any further. Is there a setting in the Boostspeed 11 that is causing this and what do I need to do to rectify this
I want boost speed to startup when win 10 starts
I cannot get this boost speed 11 version to create a staru up buttom to check or uncheck. So, currently I must start my pc. Then start boost spped 11 and diminish to the lower tray daily. I would like to set it to Start each time my pc is turned on automatically.
I do get a failur when I try to set this auto run featur from the settings within boost speed 11. I seaprch online and cannot find an answer.
Foreign language for BootSpeed 11
Is there a french translation for BootSpeed 11 ?
If no, do you plan to translate it next?
With thanks for your answer.
cordially
Patrice Vivin
default_error_stack
While running the BoostSpeed full system scan, it was taking forever, (around 50 minutes to get to 25% of scanning files). I checked the details and found that it was working its way through the default_error_stack files (several hundred thousand of them) in the windows\system32 folder. because of this I stopped the scan and now need to know how to get rid of these files or get BoostSped to bypass them
Need license key
I upgraded from Boostspeed 10 Pro (license key: G2AEG-XXXXX-3WNYY-XXXXX-G79JL) to Boostspeed 11 Pro. However, I did not reveive a license key for version 11. I have attached a copy of the transaction. Can you help me with this? Thanks.
Not loading
Dashboard, one click scanner, clean up, etc.etc.etc not loading.
What needs to be done to do so?
logiciel trop lent et pas trés maniable
Re bonjour Auslogics Team,
Ne me trouvez pas trop insistant mais j'essaie par tous les moyens d'utiliser votre nouvelle version ABSP 11.
Il est trop lent,il bloque ma machine en permanence alors qu'avec le 10.24 et avant cà fonctionnait super.
Faites quelque chose dans cette direction.J'ai essaié de rajouter un ficher langue LNG français mais cà ne marche pas
avec votre nouvelle version.Pensez qu'il n'y a pas que seulement l'anglais dans le monde [L'australie est une ancienne
colonie anglaise] mais tout de même.
Salutation.r.t.
Boostspeed 11?? version 10 exists already
My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
BoostSpeed PRO not activating
I purchased BoostSpeed PRO on 5 Jul (ord#
VPN FortiClient
I must use FortiClient VPN to work and communicate with one of my jobs, at Southern Cross University, (SCU). Until yesterday it worked fine.
I have just installed the lastest version in an attempt to resolve the non-connection issue.
Is there a setting in Auslogics BoostSpeed that might affect that VPN?
Any suggestions.
I run BoostSpeed and just accept whatever 'fixes' it suggests, the default or automatic, as I am not wise enough to adjust anything myself.
Could doing that have broken something or blocked the VPN?
I am nervous that Auslogics-Boostspeed is being over active in cleansing my system, of things that I actually need to maintain, like the Forticleint VPN. Firewall settings area mystery to me. I dont change them because I do not know what I am doing.
make simple
this is too mucj tab in software
Dashboard
Once clikc scanner
cleanup
optimize,protect and so on. huh i am officer i have not 01 hour to go thorugh each, please make menu and userinterface like AVG PC Tune Up, iolo system mechanic, Norton antivirus etc. its easy,
Please do some hard work,
updating software
i get a message on my laptop for a new verion of boostspeed 11 pro. when i click lon the link and try to update, i get a purchase screen.
so, how do i update without repurchasing the software
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
Temperature raises very high when using Boostspeed 12
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
No se le da acuse de recibo cuando envia alguna informacion. (Es una recomendacion positiva Suprema.
BoostSpeed 11 Pro being used with license: Cuando el cliente envia alguna informacion a Auslogics, si Auslogics no le da un acuse de recibo, aunque pudiera ser breve, el cliente tiene dudas de si Auslogics lo recibio.
Auslogics Shell Extensions and Startup
I recently looked into the Auslogics Startup Manager and Shell Extensions and I was alarmed to discover that 2 programs are listed as Dangerous. I have checked the web which lists these 2 program as 58% malicious. The programs relate to the Motherboard hardware installation. They are ASUS.com and atkexComSvc.exe. According to the various web sites the way to remove them is to go to Control Panel Programs and Features and to uninstall. But on my configuration they are not listed in the program list. Auslogics reports them as Dangerous. How do I use Auslogics to disable/remove/unistall?
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Blue Screen
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
Некорректная работа со сторонним ПО
Здравствуйте.
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Система:
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
Suggestion to mute certain notifications
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web
Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
Skipped traces
Lanovo with windows 10
Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-
PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!