I hated too waste a question, I'm running version 188.8.131.52.
When i try to update to newer version 184.108.40.206 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).
Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!
Здравствуйте! Программа Startup Manager выдала информацию, которую я Вам направляю в прилагаемом скриншоте. Вопрос по программе Orphaned SecurityHealth из раздела Реестр/запустить.
По имеющейся информации, производитель программы - неизвестен, рейтинг - неизвестен, существует - нет. Смотрел в интернете, нашел только описание о SecurityHealth, для которой все указанные выше характеристики указаны. Что это за программа у меня в операционной системе? Нужна ли она?
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 220.127.116.11 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
I purchased Disk Defrag, and later purchased Boostspeed. Under Boostspeed Disk Defrag I have always been able to Defrag & Optimize. I always run Defrag first (after disk cleanup), then I run Defrag & Optimize. I run these every Monday morning. I use about 19% of my 1T hard disk space. The only other programs are the automatically scheduled startup programs with staggered start delays up to 2 hours, so they should not significantly affect Defrag & Optimize.
Until 2 months ago, the longest Defrag & Optimze ran in 45 minutes or less. The maximum optimized files was about 45,000. When the Microsoft Windows update for June was implemented, the Defrag & Optimize ran over 3 hours. 2 days ago Defrag & Optimize ran for 5 hours 26 minutes with about 64,000 files optimized. The previous Defrag & Optimize was 6 days earlier.
I am a retired college educated computer professional (with all titles from programmer through analyst and manager) with over 40 years of experience. I have defragged computers for well over 25 years.
My question is "why is the Defrag & Optimize running so long and what can I do to speed it up?".
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
I have the pro version of Boostspeed installed on my PC.
I have turned off everything I can in respect of notifications, maintenance, start with Windows etc ... however the programme will - intermitently start up with windows (unwanted) or will frequently start when another programme is in use, placing the 'dashboard' screen over the active programme.
Both scenarios are intensley annoying to the point where I am giving serious consideration to removing the programme altogether.
Your advice would be appreciated.
Incidentally, please ignore the Subcategory as Auslogics does not appear in the crop down menu and I cannot send the message without something being in this field?????
I used Boostspeed 11 for some time and never had temperature issues, after de Boostpeed 12 upgrade I noticed that the fan started to make annoying noises and checked the temperature of my Laptop with the Core Temp 1.16 program which says the temp goes above 90 degrees Celsius.
Tried to install 12 again with no result.
Now back to 11 again and the temperature is normal again.
My question is this a normal behaviour of the 12 version of boostspeed?
bonjour, ce n'est pas une question relative a un probleme .. je voudrais savoir comment programmer et installer le lpgiciel pour quil gere seul la meilleur mise en bonne condition de fonctionnement de mon pc sous windows 10 ? Cdlt à vous lire
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
Thank you so much for your support.
Alex Janssens (Iepenburger)
When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
Not really settings. See below!
When running, Boost Speed 12 R 18.104.22.168 and Bit Replicator run very hot with littlel or no explanation! I realize that at start up they will kick in. Later it should not be active.
After a scan, the system is showing 51% on BoostSpeed?????
What is going on?
1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.
This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?