Auslogics Shell Extensions and Startup
I recently looked into the Auslogics Startup Manager and Shell Extensions and I was alarmed to discover that 2 programs are listed as Dangerous. I have checked the web which lists these 2 program as 58% malicious. The programs relate to the Motherboard hardware installation. They are ASUS.com and atkexComSvc.exe. According to the various web sites the way to remove them is to go to Control Panel Programs and Features and to uninstall. But on my configuration they are not listed in the program list. Auslogics reports them as Dangerous. How do I use Auslogics to disable/remove/unistall?
Corel Paintshop Pro 2020
It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.
BoostSpeed actions on Windows 10 Shut Down
I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.
My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?
Regards, Harry McBride
Fix Windows update error code 0x80073712
How do I fix Windows Update error code 0x80073712 using your BoostSpeed 11 software on my Windows 10 Pro computer. Your article on fixing this error code said you could repair is problem with your BoostSpeed 11 program.
Thank You.
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
Disc doctor
Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this
Is your softwares a virus?
Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.
Best regards,
Juarez Almeida.
Blocked URL's
Sir,
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
https://client.atlasfmi.com/en-US/Dashboard
Thank you so much for your support.
Alex Janssens (Iepenburger)
BoostSpeed Messages
I am not using the computer a lot, but BoostSpeed is regularly giving me messages to do scans or to defrag my SSD. How can I reduce the frequency of these messages?
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
Unable to uninstall application using Uninstall Manager of Boostspeed 11
I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).
I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?
猫モードについて
家族も本ソフトを持っておりますが、家族の環境ではメンテナンス画面で猫モードの表示がありません。
設定などによって猫モードが表示されないといった条件などがありますでしょうか。
Зависание прогаммы
Почему Auslogics BoostSpeed 11- 32 бита, когда будет для 64 битных windows 10?
Постоянно при запуске зависает намертво.
отключение не нужного
как в этой программе можно ли отключить все не нужно и что бы пк летатал пк нужен исключительно для игр и хотелось бы отключить все не нужное ну я не знаю половины тут не чего если можно подскажите что делать
h78
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
Reklamation !
Wann hören Sie endlich auf mit Ihrer Reklame zu Bombardieren .Es ist sehr Làstig !!!! mit gruss M.Monnier
Disc doctor
Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this
h78
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
Upgrade to BoostSpeed 11
I paid for this software before it went to version 11. Now that it updated to 11 I have to purchase it again?
Blue Screen
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
Suggestion to mute certain notifications
I have an anti-virus program that always run and notified by Boostspeed (an item just added into.... start-up), "C:\Program Files\Bitdefender\Bitdefender 2017\bdagent.exe" , in the Registry/run of the Startup Manager. How can I mute this particular notification from poping up? It is too frequent.
I suggest an exception based notification where we can right-click a particular line in the Startup Manager to mute the message, but still allow it to execute (on startup).
thank you, hoping this feature will still be in version 12.
By-the-way, I could not find "Bitdefender" in the subcategory drop down list for this subject.
BoostSpeed 11
Приветствую уважаемые! Во-первых:после оптимизации жёсткого диска"С" SSD c ОС , диск перестал открываться в предварительной программе запуска(BIOC) Windows 10 pro версии 1903, прекидывал диски местами результатов нет " Мёртвый" подскажите как его реанимироваь??? Пришлось записывать ОС на обычный жесткий диск. В цело мне ваша программа нонравилась - поддержка обяного жесткого диска значительно лучше чем другие...
Support?
Hi! Is there a plan to support the Opera GX browser? I have been using this broswer for my web serching needs. It's pretty good. However, Auslogis BoostSpeed is not recognizing the browser as a supported browser. Thank you for taking the time to read this question.
проблемы с Auslogics BootSpeed 11
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
Некорректная работа со сторонним ПО
Здравствуйте.
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Система:
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
Internet Optimization
Hello. i get free version of boostspeed and i see there is internet optimization that needs pro version and before i try to upgrade i want to ask what it is about, how dose this optimazies my internet? i have problems playing online games and i hear that windows 10 needs optimization for better gaming experience, dose this will help?
Is your softwares a virus?
Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.
Best regards,
Juarez Almeida.
Transferring Speed Boost, Defrag and Registry Cleaner to new computer
Need to do a clean reinstall of the operating system. Do I need to uninstall products before doing this.
older auslogic boostspeed
dsregard " category please , nothing made sense to fit so i just picked whatever to make the forrm work
dear auslogic ... allthough this might seems milydy entertaining .. its serious ... i find my purchased boostspeed 11 very handy for some things and situations , but i still go back for boostspeed 10 for some other situations ... however * dont get ticked off now( ... for bs10 i was never licenemed ... allthough my interest for your products started thhrtr actually ... enough boutt that... sofirst i thought i just let my free tries@ of bs 10 run out and the by then mandatory buy it or get lost whould steer my to the right page.... now as mentioned first it was just mildy annoying ... now ... wanting to have apaid 10 for LOOONG its beging to feel stupid mildy put .. always being directed to get 11 .. that i allready have... so here i I am ... at the very source of the cracjer factory asking u PLEEEAAAASE .. FFS .. can i very very please tosss some coin in your direction for a LEGIT ten ... sure enough half my youth p2p ...
howver even if i got a lax mindset on piracy i actually feel strong on the issue + if you find yourself using one thing over and over its superjustified coughing up , and for bs 10 ... in all honesty i felt that wanted to for LOOONG . just been some gaps between my tring to find TEN ... alll about 11 ... so very please ausligic folks and yes might u even take 10s FULL rate even if it might be percievied @obsolete@ ... i dont care i just very much want a legit 10 copy. a totally other idea , i do batch layman stuff , minor programing so to speak... yet to master for and loops else i might gone deepr with this idea. that be .. i lie to propose this for windows slimmer.. when i go about this manually i do say lang coeds string seaches within winsxs ,soppose im french for instance .. wanna ditch ALL locales cuz... i i fucking just want the frenchones for my os , UNLESS i got a BIIIIG family >p .. so there hes like explorer search withing top of winsxs *_en-US_* and i get ALL files from that language , alll get folder with files might not tagged but safe to assume same language since found in folder. like just getting system32 root folder , gather up all lang folder there to a list , then run searches like that. unless most people surley be contentnt with 3/4 languages, and belive me when i say , its VERY noticiable gain in space getting rid of 20-25 sane shit just in jjibberish not meant for you... so why MS bundles i can understand , but why they dont trim ones mentioned to not be using down is boyond me.... well anyhow auslogic ... please write me back regard me gladly tossing coin your way for boostspeed 10 ... cuz it be veryy happy for it .. &cheers &bj;rn Sahle ,
File Shredder
I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?
Как корректно обновить программу Auslogics?
Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?