My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
Installing Auslogics boost speed
Can Auslogics BoostSteed be installed on a second computer?
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Boostspeed
Boostspeed 12 startet immer wenn Windows 7 geöffnet wird.
Wie kann man das verhindern?
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
Lost Hystory
Why I lost my all hystory on Chrome after clean up with BoostSpeed11?
How disable cleaning/deleting hystory and cache in tyhe app?
System Scan
When I am doing a system scan the scanner takes almost 30 minutes or more when it gets to temporary files. Is there something I can do to speed this up?
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
Start up file deleted
How can I restore my file after auslogic Boostspeed deleted the program file? Meantime, i cant open a program.
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
Нужен ли антивирус если есть Bootspeed ??
Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Transfer of Auslogics boot-speed and main question about my current laptop situation
Greetings Aus Q,
Go ahead and ding me if this is perceived as more than one question.
Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.
Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.
A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?
B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?
C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?
D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.
Thank you,
Jim Copeland
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned
Regarding RAM Optimization
Hi, This's Mainak. Today I Activated Your License. Can You Help Me Out How To Enable "RAM Optimization".
Would Like To Have Reply On This.
Thanks
Mainak
Display of Registry Cleaner
I have installed BoostSpeed on my desktop where it works fine and also installed on my HP Mini Laptop where the display resolution is limited to a maximum of 1024/800. When I want to run the Registry Cleaner the "Scan" button is out of range on the screen and therefore I cannot execute the Cleaner. I have tried everything I know to alter the size of the program display but cannot.
Is there any way to execute the Cleaner since I cannot have access to the scan button? This message was prepared from my desktop so any information sent to you is not from the Mini. I will resend from the Mini if you require.