Auslogics Shell Extensions and Startup
I recently looked into the Auslogics Startup Manager and Shell Extensions and I was alarmed to discover that 2 programs are listed as Dangerous. I have checked the web which lists these 2 program as 58% malicious. The programs relate to the Motherboard hardware installation. They are ASUS.com and atkexComSvc.exe. According to the various web sites the way to remove them is to go to Control Panel Programs and Features and to uninstall. But on my configuration they are not listed in the program list. Auslogics reports them as Dangerous. How do I use Auslogics to disable/remove/unistall?
Corel Paintshop Pro 2020
It seems each time Boostspeed runs, I have to reload Corel Shop 2020 because it will not statr. I thought this might be a corel problem because the same thing was happening with the previous version.
However, the issue is happing with the 2020 version.
There miust be some issue with the files that BoostSpeed is negating.
BoostSpeed actions on Windows 10 Shut Down
I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.
My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?
Regards, Harry McBride
Fix Windows update error code 0x80073712
How do I fix Windows Update error code 0x80073712 using your BoostSpeed 11 software on my Windows 10 Pro computer. Your article on fixing this error code said you could repair is problem with your BoostSpeed 11 program.
Thank You.
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
pendrive got corrupted when i applied free up space to it by auslogics boostspeed
two days ago i have performed an action named "free space wiper" to my pendrive because i wanted to format my pendrive but befor i proceed to this action i proceed to free space wiper and i have applied to my pendrive , i don't no why but the operation stoped automatically on 33% , then i have tried to restart that operation but my pendrive was not listed on removable devices, then i have eject and remounted but still my pendrive was not listed on removable devices , then i mounted my pendrive to another system luckily that system identified my pendrive but when i tried to perform format operation to my pendrive , that shows me an error that" this disk is write protected" and after that "windows can't format removable drive:H" .....
and that's how my pendrive got corrupted by performing an operation "free space wiper"
toggle "attempt to change DNS" notification.
This appears to be a notification issue. I frequently switch my network usage to wireless, from ethernet, and back again. How can I configure Speedboost 11 NOT to notify me each time this occurs? Thank you!
Disc doctor
Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this
Is your softwares a virus?
Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.
Best regards,
Juarez Almeida.
Blocked URL's
Sir,
I don't know how to use Auslogics BootSpeed11 yet and just did something like scanning etc... .
Now, could it be that by using this program that some websites be blocked by, because of security issues for example ?
If so, how can I get this blocked sites back to use ?
I don't think this should be happen but it's just a question.
It is this site I can't get back because as is mention ---->404 - File or directory not found:
https://client.atlasfmi.com/en-US/Dashboard
Thank you so much for your support.
Alex Janssens (Iepenburger)
BoostSpeed Messages
I am not using the computer a lot, but BoostSpeed is regularly giving me messages to do scans or to defrag my SSD. How can I reduce the frequency of these messages?
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
Unable to uninstall application using Uninstall Manager of Boostspeed 11
I installed SmartDraw2020 application (free version) from the Net. Now, when I want to uninstall it, it is not showing up either in control panel or in BoostSpeed under Uninstall Manager tab. There is Uninstall option for this App when I access through Windows 10 Start Menu (see screenshot attached), but it is not uninstalling from there, due to some error (Could not open Install.log file message).
I am surprised why it is not even listed in Boostspeed under Uninstall Manager. Can you please help me?
猫モードについて
家族も本ソフトを持っておりますが、家族の環境ではメンテナンス画面で猫モードの表示がありません。
設定などによって猫モードが表示されないといった条件などがありますでしょうか。
Зависание прогаммы
Почему Auslogics BoostSpeed 11- 32 бита, когда будет для 64 битных windows 10?
Постоянно при запуске зависает намертво.
отключение не нужного
как в этой программе можно ли отключить все не нужно и что бы пк летатал пк нужен исключительно для игр и хотелось бы отключить все не нужное ну я не знаю половины тут не чего если можно подскажите что делать
h78
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
Reklamation !
Wann hören Sie endlich auf mit Ihrer Reklame zu Bombardieren .Es ist sehr Làstig !!!! mit gruss M.Monnier
Пропажа значков
Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
System Scan
When I am doing a system scan the scanner takes almost 30 minutes or more when it gets to temporary files. Is there something I can do to speed this up?
Start up file deleted
How can I restore my file after auslogic Boostspeed deleted the program file? Meantime, i cant open a program.
code
I cannot retreive my code for boostspeed 10 I got early this year, can you send it to me so I can sign up for bootspeed 11 PRO
Thanks a lot
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Paid for Pro version via paypal yesterday but no activation code sent
Hello, I paid for your pro version via paypal yesterday but have not receivedan activation code. I could possibly have given a wrong e-mail address.
Name is David Jamieson and e-mail should be *********** although I sometimes use ************
Can you please check what is wrong? I will have to contact paypal to stop payment if I don't get a quick answer. Thanks in advance, David JAMIESON
Transfer of Auslogics boot-speed and main question about my current laptop situation
Greetings Aus Q,
Go ahead and ding me if this is perceived as more than one question.
Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.
Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.
A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?
B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?
C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?
D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.
Thank you,
Jim Copeland
Нужен ли антивирус если есть Bootspeed ??
Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??
Display of Registry Cleaner
I have installed BoostSpeed on my desktop where it works fine and also installed on my HP Mini Laptop where the display resolution is limited to a maximum of 1024/800. When I want to run the Registry Cleaner the "Scan" button is out of range on the screen and therefore I cannot execute the Cleaner. I have tried everything I know to alter the size of the program display but cannot.
Is there any way to execute the Cleaner since I cannot have access to the scan button? This message was prepared from my desktop so any information sent to you is not from the Mini. I will resend from the Mini if you require.
AusLogic # BoostSpeed users
Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned