My Scanner
I ran My Scanner 5 times and there still something to fix. It is like this all the time, is there something I should do before I scan?
I am including a screen catched.
Settings
The last two times now that I Have used the "Protect" feature. All of my saved log ins have been deleted. I've had to go to the rescue center, and restore the stuff that was done. I need to know how to properly configure the settins so this does not happen again.
Where can I go to initiate cache clearing?
Occasionally it pops up. But if I wish to initiate when it has not popped up? Where do I go.
Thank you.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
Глубокая очистка файлов
Здравствуйте! После выполнения глубокой очистки файлов перестало работать стандартное приложение Windows "Кино и ТВ". Исчез exe-файл - 0 байт. Прошу учесть при подготовке обновления BoostSpeed 12, а также подсказать - как востановить приложение "Кино и ТВ"?
С уважением,
Виктор Оплеснин
Must re-enter product code in Fences after weekly scheduled maintenance
Hello,
Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.
Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.
If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?
Attached is the dialogue box that appears requesting to re-enter the product key.
Thanks,
Rich Sullivan
Корректировка
Привет! У меня вопрос по программе Ausjogics BoostSpeed. Дело в том, что при каждом новом запуске загружается рекламное окно с предложением дополнить вашими прграммными продуктами мою систему. Это окно сжирает много ресурсов системы, что приводит к зависанию и потере времени, значительной потере. Как можно отключить данное окно? Ведь то , что меня интересовало, я уже приобрёл. Не хотелось бы получать разочарование от вашей продукции.
С уважением, Алексей.
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
Where is my software
Hi
I have used your software for years now.
I purchased new copies of Boostpeed and DriverUpdater
I don't have driverupdater on my computer just the web version
The webversion caused my windows not to reboot
I've had to re install everything
I would like to run driver updater but do not trust it without some sort of supervision
Can't go through this again
Registering all my purchases over again
Some still aren't working
Thank you
Thomas Horricks
Compare configuration changes in boostspeed
I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.
Regards,
Paul
BoostSpeed actions on Windows 10 Shut Down
I use Microsoft Office 2003 and one of the features maintains a list of recently used files in each of Word, Excel and Outlook. Recently the recently used files list in these three programs has been cleared following shut down at the end of the day so that when I restart my computer the next day the recently used file lists are empty and start being repopulated during the course of the day but again are cleared following the final shut down of the day.
My question is - is there a feature of Boostspeed that is clearing these lists and how do I change it so that it doesn't happen?
Regards, Harry McBride
Auslogics Configuration of Windows old version
I remember that I had an option in previous versions that allowed me to change things in Windows like Legal Rights, or Comments page before login to Windows or right after it.
However, I cant find what is that option in the current version. Could you please help me out?
I prepare storyboards for training and I would like to have a page with some personal information.
Thanks in advance.
Fernando Salmeron
Uninstall manager
Можно вернуть в Uninstall manager
количество установленных программ? куда то пропали...
Спасибо.
Зависание прогаммы
Почему Auslogics BoostSpeed 11- 32 бита, когда будет для 64 битных windows 10?
Постоянно при запуске зависает намертво.
Xтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Здравствуйте. у меня Auslogics BoostSpeed 12, программа шикарная. Но есть одни минус, когда она производит сканирование то отключается «Служба сенсорной клавиатуры и панели рукописного ввода». Эта служба нужна не только для компьютеров с сенсорными экраном, она отвечает за то, чтобы выводить слава по мере ввода букв, как в Android и IOS. Я печатаю ногой, и мне эта функция очень сильно облегчает печатать тексты в Windows 10. Чтобы Auslogics BoostSpeed 12 не отключала Службу сенсорной клавиатуры и панели рукописного ввода, в настройках программы я вынужден отключать пункт «Продуктивность», а эта сильно урезать функционал. Поэтому прошу в дальнейших версиях исправить эту проблему, чтобы Auslogics BoostSpeed 12 не отключал службу «Служба сенсорной клавиатуры и панели рукописного ввода».
Александр
integrator.exe грузит процессор
Процесс integrator.exe грузит процессор постоянно, как это исправить?
MSCONFIG settings
I am curious , do you have settings needed for faster start ups of the msconfig settings ? For it will make start ups even faster in windows 10 or more than likly even in windows 7 & 8 as well.
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Can't install update
On two occasions, I attempted to install the updated version of Boost Speed 11. Each time I got the Blue Screen of Death. That's unacceptable for the $50 I paid for the full registered version. Please advise a fix.
No se le da acuse de recibo cuando envia alguna informacion. (Es una recomendacion positiva Suprema.
BoostSpeed 11 Pro being used with license: Cuando el cliente envia alguna informacion a Auslogics, si Auslogics no le da un acuse de recibo, aunque pudiera ser breve, el cliente tiene dudas de si Auslogics lo recibio.
Auslogics Disk Defrag & Optimize
I purchased Disk Defrag, and later purchased Boostspeed. Under Boostspeed Disk Defrag I have always been able to Defrag & Optimize. I always run Defrag first (after disk cleanup), then I run Defrag & Optimize. I run these every Monday morning. I use about 19% of my 1T hard disk space. The only other programs are the automatically scheduled startup programs with staggered start delays up to 2 hours, so they should not significantly affect Defrag & Optimize.
Until 2 months ago, the longest Defrag & Optimze ran in 45 minutes or less. The maximum optimized files was about 45,000. When the Microsoft Windows update for June was implemented, the Defrag & Optimize ran over 3 hours. 2 days ago Defrag & Optimize ran for 5 hours 26 minutes with about 64,000 files optimized. The previous Defrag & Optimize was 6 days earlier.
I am a retired college educated computer professional (with all titles from programmer through analyst and manager) with over 40 years of experience. I have defragged computers for well over 25 years.
My question is "why is the Defrag & Optimize running so long and what can I do to speed it up?".
lhenricksen@hotmail.com
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?
BootSpeed 12 installation software
I just bought an additional laptop can I use my paid subscription and install it in my computer
cleaning done or not done?
Each time when I do a manual clean of: one click scanner, reg cleaner, duplicate file finder, deep disk cleaner, the page displays the following message.
This has not been cleaned since (date), Also, immediately after the internet optimiser has been run and optimised and rebooted it requires another scan to optimise straight after the reboot.
I looks as if the program does all the tasks required but does not record it as being done.
Your comments appreciated
Bill
Remote Desktop Service is disable by some process
My IT department believes some way the Auslogics BoostSpeed 11 software is disableing the Remote Desktop Service. I work from home offten and I need to connect to this PC to develop and technical support of our users. How can I find if your application is changing the service to disabled?
Remote Desktop Service
Where can I disable inside BoostSpeed 12 to not disable the Remote Desktop Service? Each time I reboot my PC I loose the ability to remote to my PC at the office because the service is disabled.
BoostSpeed Pro Version
Hello Sir,
My question is whether the software Auslogics Registry Cleaner 9 is not already included in the software BoostSpeed in its Pro Version. I will have to purchase and register both softwares? The BoostSpeed Pro Version will not be enough to bring my PC the best performance?
Thanks