251 questions

Bootspeed 13

What about Bootspeed 13? Is it possible to do somethings to have Bootspeed 13 in place of Bootspeed 12 without payement?

1327 views
Feb 25, 2022 at 11:38 PM

misea jour Auslogics

Bonjour à vous,

Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).

Merci pour votre aide.

Cordialement

AB.

696 views
Nov 16, 2021 at 12:47 PM

Bootspeed 12 hung at 13% complete

Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?

851 views
Nov 15, 2021 at 10:43 PM

Won't allow install

I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.

1066 views
Nov 08, 2021 at 04:36 PM

Icone

Bonjour,

Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert

Cordialement
Denis Schmitt

776 views
Nov 07, 2021 at 04:32 PM

Мой Сканер

Вопрос не о Spotify а AutoLogics BoostSpeed 12 Можно ли исправить определенные ошибки а не нажмиать Исправить Все?

658 views
Nov 02, 2021 at 04:05 PM

No Disk DeFrag menu option in Auslogics 10

I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".

what's going on?

thanks,

Brian

885 views
Oct 31, 2021 at 03:18 PM

Transferring Speed Boost, Defrag and Registry Cleaner to new computer

Need to do a clean reinstall of the operating system. Do I need to uninstall products before doing this.

886 views
Oct 29, 2021 at 06:26 PM

Работа ключа ЭЦП (Электронная цифровая подпись)

Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).

Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!

716 views
Oct 28, 2021 at 08:59 AM

О пояснениях к информации в Startup Manager

Здравствуйте! Программа Startup Manager выдала информацию, которую я Вам направляю в прилагаемом скриншоте. Вопрос по программе Orphaned SecurityHealth из раздела Реестр/запустить.
По имеющейся информации, производитель программы - неизвестен, рейтинг - неизвестен, существует - нет. Смотрел в интернете, нашел только описание о SecurityHealth, для которой все указанные выше характеристики указаны. Что это за программа у меня в операционной системе? Нужна ли она?

946 views
Oct 13, 2021 at 08:44 AM

BootSpeed 12 pre-purchase question

Hi,
I'm considering the purchase of BootSpeed 12 Pro, but I'd like to know if you have any usable discounts at this time.
Thanks

719 views
Oct 08, 2021 at 01:47 PM

empty folder cleaner

Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive

1018 views
Oct 05, 2021 at 12:00 PM

AUSOLOGICS 12 UPDATE NOTIFCATION

Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul

885 views
Oct 01, 2021 at 02:23 AM

update

is there an update to my didk defrag 10?

1384 views
Aug 31, 2021 at 01:33 AM

Автозагрузка Auslogics File Recovery 10.1.0.1

Здравствуйте, у меня вопрос по программе "Auslogics File Recovery 10.1.0.1". Она постоянно загружается при запуске Windows 7 Pro. (в трее). Хотя я и убирал запуск этой программы из автозагрузки, всеми способами. Помогите пожалуйста решить вопрос с отключением автозапуска "Auslogics File Recovery 10.1.0.1".
Спасибо

770 views
Aug 30, 2021 at 12:34 AM

Defrag

I'm using your standard Auslogics Disk Defran 10, and can never get the level of defrag to less that 13% on my Win 7 disk. No other defrag programs have been able to do any better, the inherent Win defrag running for hours with no improvement.
Any idea how I can resolve this?
Thanks

1184 views
Aug 29, 2021 at 12:31 AM

BoostSpeed 12 deleting my Spotify playlist files

EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?

880 views
Aug 25, 2021 at 03:48 PM

Regarding RAM Optimization

Hi, This's Mainak. Today I Activated Your License. Can You Help Me Out How To Enable "RAM Optimization".

Would Like To Have Reply On This.

Thanks
Mainak

1010 views
Aug 19, 2021 at 05:33 PM

empty folder cleaned doesn't work

When I click on the box to do away with empty folders, nothing happens. It used to work but I stopped it in the middle of its job.

811 views
Aug 14, 2021 at 11:52 PM

Сброс настроек входа в систему Windows

Добрый день!
Каждый раз при использовании сканирования системы утилититой, после перезагрузки сбрасываются пароли для входа в Windows. Настройки сканирования ни к чему не приводят. Спасибо.

982 views
Aug 09, 2021 at 03:41 PM

Google Drive File Stream Stops Working

How do I prevent BoostSpeed from interfering with Google Drive File Stream? Each time I scan, I lose connection to the Google Drive File Stream and have to uninstall and re-install it.

819 views
Dec 12, 2019 at 02:08 PM

The Select full screen/ minimise button is no longer showing at the top right of the screen.

When I first in stalled boost speed 12 it worked fine but now the minimise button is no longer showing. I did implement some of your window 10 tweaks, so could any of these be the reason.
Also I have tried the reinstall the version version 12.0.02 and installed version 12.0.0 but although the button is there at the start, it soon disappears and I can not get it back.

819 views
Jan 25, 2021 at 11:03 AM

Dégragmentation

Bonjour,

Lorsque j'effectues une défragmentation de mon ssd avec l'option pour sdd, ils reste des carrées en rouge.
J'ai sélectionné dans les options 'tous les fichiers'.

Egalement l'indicateur ne se met pas a 0%

Cordialement
Denis Schmitt

817 views
Mar 21, 2021 at 05:42 PM

Boostspeed 11?? version 10 exists already

My version of 10 expires in December 2019. Do I have take out new contract and forget about balance on version 100>>
Otherwise I have to keep version 10 until december and then switch???
regards
Eddie
Auslogics BoostSpeed 10
XXXXX-25AX7-GEWGG-9J4AA-XXXXX - expires december 2019

815 views
Jul 16, 2019 at 05:59 AM

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

815 views
Apr 14, 2021 at 08:05 AM

Autostart

warum wird disk defrag 10 ständig mit geladen beim start - es ist nicht möglich den autostart zu unterbinden - auf dauer ist es mir zu mühseelig ständig disk defrag zu deinstalieren und vor gebrauch wieder zu instalieren - meinem chef muße ich das programm auch wieder ausreden nachdem ich ihn davon überzeugt hatte es auf allen rechnern in der firma zu instalieren

813 views
Jul 23, 2021 at 05:30 PM

Deep disk cleaner

Bonjour
Un message m'indique que Deep Disk Cleaner ne peut pas étre lancé lors du démarrage de Boostspeed. Comment puis je le réinstaller ?
Merci de votre réponse.

Cordialement

Laurent MESNIER

813 views
Jun 05, 2020 at 04:53 PM

Оптимизация и дефрагментация

В чем коротко отличие оптимизации от дефрагментации HDD ?

812 views
Apr 17, 2021 at 05:57 PM

empty folder cleaned doesn't work

When I click on the box to do away with empty folders, nothing happens. It used to work but I stopped it in the middle of its job.

811 views
Aug 14, 2021 at 11:52 PM

BoostSpeed

Hi,

1 . There was NO Sucategory that matched my Question so I picked 3D Builder <-- ignore please.

This morning was the second time that my laptop was taken over by a “disk repair” function that I think is linked with BoostSpeed. I start up my laptop and something begins churning away telling me that it will take 8 hours to complete. Actually it could not tell time correctly because it took 3 ½ hours before I could use the laptop.
Q: How to prevent this happening again? At least giving me the option to say OK do it now or wait?

Thanks,

Michel

811 views
Sep 29, 2019 at 08:30 PM

rescan

When you do a rescan, why don't you just have go ahead and do it, instead of having to click on scan again? Stupid question
Thanks Roger L Batchelder

809 views
Nov 16, 2020 at 04:48 PM

Пропажа значков

Сделал оптимизацию и пропали значки с панели интсрументов, не могу найти как вернуть. Отметил на скриншоте

805 views
Oct 09, 2019 at 12:18 PM

Браузер Opera

После сканирования удаляет все пароли как отключить

805 views
Apr 19, 2021 at 05:41 AM

AusLogic # BoostSpeed users


Where does display state the maximum number of user available with the product key assigned; and where does it show how many have been assigned; and where do they give the user name of the assigned

802 views
Feb 04, 2021 at 10:37 PM

Defragmenter related question

There was no option for auslogics defragment so i chose a wrong category.My question is about defragment.Does defragmenting the hard disk HDD daily damage the hard disk or corrupt it ?

800 views
Mar 20, 2021 at 05:50 AM

Нужен ли антивирус если есть Bootspeed ??

Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??

797 views
Oct 24, 2020 at 04:09 PM

ключ

как узнать свой ключ программы для переустановки.где он хранится?

797 views
Aug 09, 2020 at 02:41 AM

Select language

Hello, i cant find a "Language" button to change it. Help me pls

796 views
Sep 27, 2019 at 12:17 AM

Missing subcategory

What is the correct subcategory for a software question for Auslogic products such as Boostspeed, Disk Defgrag, etc.? The "Ask a Question- New Question" screen will not allow a Subcategoty that is not on the drop down list.

796 views
Jul 21, 2021 at 09:41 PM

Must re-enter product code in Fences after weekly scheduled maintenance

Hello,

Boostspeed runs every Sunday morning as part of scheduled maintenance I set-up. After it runs, I am prompted to re-enter my product key for Fences. I do this and Fences works fine. This is a nuicance though as I should not need to do this - the Fences registration is valid. Given the timing is consistent, I am assuming Boostpeed is causing this issue.

Several weeks ago, I did exempt my Anti-Virus software from scanning the Fences folder which contains the registration certificate. However, the prompts continue.

If Boostspeed is indeed causing this issue, is there a way to have it avoid removing/maninpulating the registration of this software so I don't have to re-enter the product code weekly?

Attached is the dialogue box that appears requesting to re-enter the product key.

Thanks,
Rich Sullivan

795 views
Mar 22, 2021 at 08:41 PM