Bootspeed 13
What about Bootspeed 13? Is it possible to do somethings to have Bootspeed 13 in place of Bootspeed 12 without payement?
misea jour Auslogics
Bonjour à vous,
Je n'arrive pas à installer la derniere mise à jour de Auslogics 12 200 malgré la demande qui m'est propose dans le bas de l'écran.
Je suis donc tojjours sur la version 12 101 (je crois).
Merci pour votre aide.
Cordialement
AB.
Bootspeed 12 hung at 13% complete
Started a scan and it is in Stability with a message that says 12047, scanning please wait. Detail screen says 13% complete. Its been like this for 24 hours. What do I do now?
Won't allow install
I hated too waste a question, I'm running version 12.0.0.4.
When i try to update to newer version 12.2.0.0 the screen blinks off and then back on.
I have tried the two arrows lower rignt corner only blinks and returns to same window i'm on.
When i go too tools and use the update button i geet the same result, flash on screen and back to same screen.
Icone
Bonjour,
Malgré après avoir réaliser une optimisation de mon disque dur l'icone dans la barre de tâches reste en rouge. Que cela veux dire et comment résoudre pour le mettre en vert
Cordialement
Denis Schmitt
Мой Сканер
Вопрос не о Spotify а AutoLogics BoostSpeed 12 Можно ли исправить определенные ошибки а не нажмиать Исправить Все?
No Disk DeFrag menu option in Auslogics 10
I installed this today, paid $30.00 dollars for it (after using a free verison for years), and after one attemot at optimizing my SSD on my Acer Laptop, the prgram restarted after completion and when it did it no longer has the menu option to actually defrag anything. the only menus i have are "reports" "Portable version" "ask a question" and "auslogics store".
what's going on?
thanks,
Brian
Transferring Speed Boost, Defrag and Registry Cleaner to new computer
Need to do a clean reinstall of the operating system. Do I need to uninstall products before doing this.
Работа ключа ЭЦП (Электронная цифровая подпись)
Один и тот же ключ ЭЦП (Электронная цифровая подпись) на флеш-памяти с одного компьютера считывается и подписывает документы без ошибок, а со второго - нет, Выдает ошибку о невозможности использования или сертификат поврежден. Главное - до чистки компьютера программой Auslogics BoostSpeed 12 ключ без ошибок подписывал документы и со второго компьютера. Вопрос, что мог изменить или удалить Auslogics BoostSpeed 12 в компьютера, то перестал корректно работать ЭЦП (Электронная цифровая подпись).
Какую службу или какие настройки в Windows 10 надо изменить, чтобы Электронная цифровая подпись работала со второго компьютера и подписывала документы? Спасибо!!!
О пояснениях к информации в Startup Manager
Здравствуйте! Программа Startup Manager выдала информацию, которую я Вам направляю в прилагаемом скриншоте. Вопрос по программе Orphaned SecurityHealth из раздела Реестр/запустить.
По имеющейся информации, производитель программы - неизвестен, рейтинг - неизвестен, существует - нет. Смотрел в интернете, нашел только описание о SecurityHealth, для которой все указанные выше характеристики указаны. Что это за программа у меня в операционной системе? Нужна ли она?
BootSpeed 12 pre-purchase question
Hi,
I'm considering the purchase of BootSpeed 12 Pro, but I'd like to know if you have any usable discounts at this time.
Thanks
empty folder cleaner
Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
Автозагрузка Auslogics File Recovery 10.1.0.1
Здравствуйте, у меня вопрос по программе "Auslogics File Recovery 10.1.0.1". Она постоянно загружается при запуске Windows 7 Pro. (в трее). Хотя я и убирал запуск этой программы из автозагрузки, всеми способами. Помогите пожалуйста решить вопрос с отключением автозапуска "Auslogics File Recovery 10.1.0.1".
Спасибо
Defrag
I'm using your standard Auslogics Disk Defran 10, and can never get the level of defrag to less that 13% on my Win 7 disk. No other defrag programs have been able to do any better, the inherent Win defrag running for hours with no improvement.
Any idea how I can resolve this?
Thanks
BoostSpeed 12 deleting my Spotify playlist files
EWhy does every time i run the BoostSpeed 12 scan it deletes all of my Spotify downloaded playlist files?
Regarding RAM Optimization
Hi, This's Mainak. Today I Activated Your License. Can You Help Me Out How To Enable "RAM Optimization".
Would Like To Have Reply On This.
Thanks
Mainak
empty folder cleaned doesn't work
When I click on the box to do away with empty folders, nothing happens. It used to work but I stopped it in the middle of its job.
Сброс настроек входа в систему Windows
Добрый день!
Каждый раз при использовании сканирования системы утилититой, после перезагрузки сбрасываются пароли для входа в Windows. Настройки сканирования ни к чему не приводят. Спасибо.
defrag 10 running sooo slow
Used to run fast, I have changed the advanced settings, now running slow,
I guess you cannot know which advanced settings I have enabled, (most of them)
what do you think? and what is your best guess as to my problem?
Windows Slimmer question
After scanning for old windows libraries and initializing the cleaning process. It says process completed but no files are cleaned. Still 2.7 Gig installed on rescan and same problem on re-cleaning. What to do? Thanks
Sorry, I couldn't find a catagory for Windows Slimmer questions
CPU Usage
I'm new to the softward. Running v12.
Auslogic is running in the background, I guess. (I didn't start any actions since my recent reboot.)
It's using between 25 and 40% of my CPU capacity. I DO NOT want that to happen. If something's running on its own, how do i schedule it to run during the night.
Why is it doing that? What's running? How can I keep it from starting a process on it's own.
(I know i can hit "End task" in Task Mgr, but I wanted to know how to prevent this in the future.)
Thank you,
SjK
Blue Screen
When ever I try to update any Auslogics software to the latest version, I get a blue screen error on my laptop. This happened earlier with Auslogics Registry Defrag and now happening with Auslogics BoostSpeed.
I have to end up uninstalling and reinstalling the software.
A solution to this problem will be appreciated.
проблемы с Auslogics BootSpeed 11
Уважаемые господа!
Я получил извещение об доступном обновлении программы. Япопытался кликнуть обновление, но ссылка не кликается.... эта же проблема с отчетами, когда я пытаюсь кликнуть подробный отчет, он не кликается.
Что мне предпринять для устранения этой ошибки?
older auslogic boostspeed
dsregard " category please , nothing made sense to fit so i just picked whatever to make the forrm work
dear auslogic ... allthough this might seems milydy entertaining .. its serious ... i find my purchased boostspeed 11 very handy for some things and situations , but i still go back for boostspeed 10 for some other situations ... however * dont get ticked off now( ... for bs10 i was never licenemed ... allthough my interest for your products started thhrtr actually ... enough boutt that... sofirst i thought i just let my free tries@ of bs 10 run out and the by then mandatory buy it or get lost whould steer my to the right page.... now as mentioned first it was just mildy annoying ... now ... wanting to have apaid 10 for LOOONG its beging to feel stupid mildy put .. always being directed to get 11 .. that i allready have... so here i I am ... at the very source of the cracjer factory asking u PLEEEAAAASE .. FFS .. can i very very please tosss some coin in your direction for a LEGIT ten ... sure enough half my youth p2p ...
howver even if i got a lax mindset on piracy i actually feel strong on the issue + if you find yourself using one thing over and over its superjustified coughing up , and for bs 10 ... in all honesty i felt that wanted to for LOOONG . just been some gaps between my tring to find TEN ... alll about 11 ... so very please ausligic folks and yes might u even take 10s FULL rate even if it might be percievied @obsolete@ ... i dont care i just very much want a legit 10 copy. a totally other idea , i do batch layman stuff , minor programing so to speak... yet to master for and loops else i might gone deepr with this idea. that be .. i lie to propose this for windows slimmer.. when i go about this manually i do say lang coeds string seaches within winsxs ,soppose im french for instance .. wanna ditch ALL locales cuz... i i fucking just want the frenchones for my os , UNLESS i got a BIIIIG family >p .. so there hes like explorer search withing top of winsxs *_en-US_* and i get ALL files from that language , alll get folder with files might not tagged but safe to assume same language since found in folder. like just getting system32 root folder , gather up all lang folder there to a list , then run searches like that. unless most people surley be contentnt with 3/4 languages, and belive me when i say , its VERY noticiable gain in space getting rid of 20-25 sane shit just in jjibberish not meant for you... so why MS bundles i can understand , but why they dont trim ones mentioned to not be using down is boyond me.... well anyhow auslogic ... please write me back regard me gladly tossing coin your way for boostspeed 10 ... cuz it be veryy happy for it .. &cheers &bj;rn Sahle ,
Internet Optimization
Hello. i get free version of boostspeed and i see there is internet optimization that needs pro version and before i try to upgrade i want to ask what it is about, how dose this optimazies my internet? i have problems playing online games and i hear that windows 10 needs optimization for better gaming experience, dose this will help?
Outlook 2013
I cannot no longer open a browser in Outlook 2013 after using your registry cleaner. Let's not play games like we have been doing since July 2020. Support is a JOKE!!!
Is your softwares a virus?
Why my Kaspersky anti virus program treats your softwares as a virus and shows me constantly warnings that I am in risk?
I do not have files to show you th problem because I unisntalled all your programs until I am sure that I am not in risk indeed.
Best regards,
Juarez Almeida.
Некорректная работа со сторонним ПО
Здравствуйте.
Пользуюсь Auslogics BoostSpeed недавно. Еще не во всем разобрался.
Столкнулся с проблемой что каждый раз после сканирования компьютера и последующей очисткой вашей программой, у меня перестает работать Google Drive File Stream. Уже в исключения вносил папки Google Drive в ProgrammFiles и в папке кэша. Все равно перестает работать.
Подскажите как быть или в чем проблемма.
Система:
Windows 10-Home 64-bit, v.1809, сборка 17763.737.
Intel(R) Core(TM) i5-8265U CPU@1.6-1.8 GHz; RAM - 8 Gb.
Your Defrag program
Can you explain this? I downloaded the "free" defrag version last Saturday. It worked perfectly. On Sunday, I dod my usual maintenance, which includes defragmentation and back-up. Again, it worked perfectly. Today, when I was working I got a message indicating that a "defragment" was urgently needed. So I did yet another defragmentation. Then, for some reason which
I cannot explain, I downloaded the "pro" version of your product. Once it was completed, I did yet another defragmentation. To my surprise, there were files that required yet another defragmentation. My question is, why? Should I really trust that your software is actually doin what it is supposed to?
File Shredder
I have added file shredder to recycle bin. However, when I try to delete file with file shredder, boost speed opens it large box with deletion options. Is there any possible way to delete file from recycle by using file shredder without opening the entire software ?
Disc doctor
Disc doctor advices that I have a disc errpr pn my main drive. How do I rectify this
AUSOLOGICS 12 UPDATE NOTIFCATION
Dear Support, I have Auslogics Boostspeed 12 on my machine. There was a flash on the screen of 12.2.0.0 a recommended update.
So my question is there was nothing in that flash update telling me if its a to pay for update or for free. This need to be shown in my book. Do you see where I am coming from with this? It shows what the big fixes are with the new update but yet nothing about if you hit the link if there is a small payment involved. This needs to be incorporated as part of any firmware update in my book. Regards Paul
Unwanted Auslogics Intrusion
I have the pro version of Boostspeed installed on my PC.
I have turned off everything I can in respect of notifications, maintenance, start with Windows etc ... however the programme will - intermitently start up with windows (unwanted) or will frequently start when another programme is in use, placing the 'dashboard' screen over the active programme.
Both scenarios are intensley annoying to the point where I am giving serious consideration to removing the programme altogether.
Your advice would be appreciated.
Incidentally, please ignore the Subcategory as Auslogics does not appear in the crop down menu and I cannot send the message without something being in this field?????
Remove write protection your software put on my new external drive
How do I remove write protection from my new segate almost empty drive so I can transfer stuff to it?
slow computer.
hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri
Не отображаются элементы сайтов
Здравствуйте.
После оптимизации Auslogic BoostSpeed 11 перестали отображаться в браузере на сайтах: подложки карт местности, он-лайн графики.