Device-related issues

I have a Jabra Speak 710, connected through a Jabra Link 380 bluetooth device.
My computer (Thinkpad, with Windows 10 Pro Version 22H2) does not recognize the speaker as a sound device.
When connected to the computer through the USB cable, the speaker is visible in the catagory Other Devices iso Audio Devices.
The speaker and the link are working fine on another computer of mine, and also on my smartphone.
I reached out to Jabra support, they have helped me resetting the firmware, removing and reconnecting the device etc. but nothing works. I even got a new speaker from them, but still no change.
The problem started after installing an update of a driver. Undoing the update did not help.
I have even done a full re-installation of Windows, which has removed all customized settings, but problem still persists.
When starting up the computer, there is a very brief connect with the speaker (the speaker says : "PC connected"), but immediately followed by a disconnect (the speaker says : "PC disconnected")
I think there is an entry in the registry that prevents connecting with the speaker, but I am not able to identify it.

How do I go about fixing the right click in windows 10 using your basic program?

I have a Samsung Portable SSD T5 (1Terabyte) connected to my Lenovo Ideapad PC Laptop (running Windows 10 64bit) via the USB 3 port.
Windows and Samsung SSD software are both up-to-date. When I run the Windows 10 Disc Optimiser it does not detect the Samsung SSD and only shows my harddrive SSD therefore I cannot optimise it using Windows 10. I have tried connecting it to the other USB ports on my PC (these are both USB 2) but the result is the same.
Do you have any idea what can be causing this and is there a solution ?
(My Samsung SSD is detected by BoostSpeed 11 in the "Optimize" section)
I have included a screenshot of the Windows 10 "Optimise Drives" window on my PC if that helps.
Many thanks for your kind attention.

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.

Why The Hard Disk of windows sometime use at 100 percent and really slow down computer ?

my Ipv4 and Ipv6 is showing it is not connected. ive tried a number of fixes including going to command prompts, ive tried going back to a restore point, however i keep getting an error message saying that files are corrupted and cannot be restored to a previous point. ive run windows trouble shooter, i get this error message 0x800f081f. even when i hard wire my computer using an ethernet cord, my internet does not remain on constantly, it will log me off the internet and back on multiple times. do you have a program that can clean up these window based errors, to be able to restore my computer? i believe the last update i got was 12-13-2020, the day prior to that, my wireless was working. anything you can suggest?

Tengo una laptop Lenovo T470 y un teclado externo Microsoft Ergonomic keyboard 4000
Compre la lic de BOOTSPEED y tambien la licencia de DRIVER UPDATER
Cuando actualizo los drivers ya no funciona ningun teclado
Esto ya me sucedio dos veces y esta es la tercera ocasion
Necesito me ayuden a resolverlo
Para redactar este correo estoy utilizando el teclado en pantalla

Screen flickering occurs while downloading ".acsm" files.

Hello all, happy holidays!

Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.

I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point

JBL Cannot connected as Stereo Device

Bonjour,
Suite à des modifications de BootSpeed, la webcam de mon ASUS VivoBook Pro 17 N705FD ne fonctionne plus.
Elle a commencé à se mettre en 4/6, puis elle est maintenant déconnectée !
J'ai désinstallé le programme et coché l'option "restaurer les changements éffectués", mais cela n'a pas résolu le problème.
Best regards,
loupherv

hi there, i am having a issue with my disk usage, my disk usage is at 100% a lot of the time when nothing is showing up in task manager as far as usage, any help on this issue would be greatly appreciated,
kind regards
pete

При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.

I have had this problem multiple times.
Usually I just delete all sound drivers using Device Mgr.. then restart..
But..
Why does sound fail?
Is there a way to fix through AusLogics?

how can I restore my mobile hotspot?

I'm thinking about installing "xtra PC" to rev up my Desktop. Does it really work?
If not, does boostspeed have a way of identifying bloatware?
Thank you!

i am not getting any sound into speakers from pc

Drive is 81% fragmented and disk defragmenter does not defrag, just states completed. How to get the drive to defrag/optimize?