410 questions
Auslogics Driver Updater should I cancel or wait for installation to finish?
I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Auslogics BoostSpeed が上手く使えません
マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?
impossible de supprimer adobe acrobat cause FullTrustNotifier.exe
bonjour,
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Comment supprimer adobe acrobat reader ensachant que lorsque je commence la procedure, il stoppe la uninstall car fullTrustNotifier.exe n'est pas marque comme installé, j'ai pourtant desactive le Adobe genuine notifier dans les services windows, supprimer les cles de registre notifierClient et supprimer manuellement les repertoires, mais je ne peux pas desisntaller depuis l'appli windows des programmes ni meme modifier, corriger, ou installer une autre version.
Toute aide est la bienvenue et le logiciel d'adobe pour nettoyer les mauvaises desinstallation: AdobeAcroCleaner, ne fonctionne pas, il ne repond pas en 10 sec apres le lancement..bref, tout pour plaire
Merci
Cordialement
Maintaining Boostspeed
The latest version appears to be 13.0.0.6. Do you intend to maintain this product? as rapidly as things are changing it appears this product is not going to keep up.
taskbar\system errors\explorer.exe\overrun in slack based buffer
Since my first question my problem is getting worse. Now I'm unable to open the control panel the shortcut on my desktop disappeared as I tried to open it. Troubleshooter samething. I cant get a lot of things to open anymore. Cant contact Dell, Microsoft, boost speed 13 still works, but for how long? Please help me before I chuck this thing in the garbage
Explorer.EXE error code\ taskbar
About a week ago that code popped up with this text attached to it." The system had detected and overrun of slack based buffer in this application." Since then my taskbar has totally disappeared. I looked online and found some fixes, I've tried about 30 of them now and nothing works.. I've gone into the control panel to open the taskbar directly, it will not open.
Does this leave adult website traces
So these "rammerhead" links like rammer.rude.li ive been using for accessing anything that is adult and is purported to have privacy becuase its a browser inside your browser that has a different IP to prevent ISP from seeing your activity but it is deteced in adult website traces in privacy of auslogics? is this not really private and is just a false sense of security like incognito?
indexação é apagada
Qual a chave que devo desmarcar na hora que faço a limpeza fina do windows com o Bootspeed 13 ? Pois sempre que faço uma limpeza fina profunda eu perco a indexação de arquivos e sou obrigado a dar o comando pra re- indexar, não só os arquivos com0o tambem a indexaçaõ do Outlook. O que acaba me obrigando a comandar uma nova indezação e isso demora muito.
fbaiao@netfb.com.br
fbaiao@netfb.com.br
Auslogics BoostSpeed13
Why can I not remove any brower add-ons (FF, Chrome) through the internet Optimizer? It shows the add-ons but says a setting or synchronization is preventing the process?
Thanks in advance - Scott
Thanks in advance - Scott
Proper Clean Up steps for Auslogics BoostSpeed13
Is there / what is the proper order in which to use the many tools for optimization and clean up with Boost13?
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
Any why is BoostSpeed13 not listed in software subcategory?
Thanks in advance - Scott
The version of AMD software is no compatible with your current installed AMD graphics driver.
I have downloaded and installed the latest version of AMD Software Adrenaline Edition 24.1.1 and it worked just fine.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Cubase and low DSP, ISR latency
Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
startupmanager
I got an errormessage from startupmanager.exe with a bug-report, see attachment. What to do about it?
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
I left my laptop idle for a few hours. When I returned this errormessage was in front.
The following applications were open: Excel, Wordpad, Windows Explorer, Chrome, Firefox, WhatsApp, FileZilla.
Adding Subtitle to Movie
I have a mp4 video (movie) file and the corresponding srt (Chinese) subtitle. I want to add the substitle to the movie and save it with the subtitle either selectable (on/off) or permanently embedded. I have tried to follow procedure numerous times but I am missing or misunderstanding something. How do I do it?
Gostaria de ter
Bom dia!
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
É possível que a AUSLOGICS adicione ao BoostSpeed algo como o Partition Master, algo que ajude a solucionar problemas mais profundos nos HDDs?
Versionsunterschiede von DiskDefrag zu DiskDefrag Ultimate
Was ist der Unterschied der DiskDefrag zu DiskDefrag Ultimate die Im Auslogics Store angeboten wird?
Der Preis von 21,56 € ist ja beiden identisch.
Der Preis von 21,56 € ist ja beiden identisch.
auslogic
Hi, sorry for my poor Englsh... I started reg clean in auslogic but it made some changes in my pc that I did not like. How can I make a recovery?
installation logiciel
Bonjour, je n'arrive pas à installer un Logiciel , j'ai une erreur 1720 de windows installer
Auslogics Driver Updater should I cancel or wait for installation to finish?
I am trying to update my Nvidia GeForce GTX 960 driver via Auslogics Driver Updater and it's taking a very long time to install. I began the process yesterday (29/03/24) at around 7pm and expected it to take a long time to back-up the old driver setting and then download the new driver. I've come back to my computer at 30/03/24 at 1pm and it is still installing.
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
Should I continue to wait (and if so, for how long) or should I cancel the installation and rollback to the older driver?
I have changed my power setting to High without any permission to go to sleep so the PC has not gone into sleep mode mid-process. I have also shut down most non-critical background processes (Steam, OneDrive, etc) to let Auslogics Driver Updater have as much CPU / RAM as needed.
Thank you
How to avoid file delete problems in Lightroom Classic
Lightroom creates catalog images and movg es file around as you manage the catalog and/or import files from various devices or drives. How can I avoid LR catalog issues when using Aslogics software?
Saved on PC Email
A long time ago I had AOL (not Gold) & I couldn't transfer the Saved on PC mail to Gold. My Question is: Can your File Recovery Software recover that mail from my hard drive?
Anti-virus
Bonjour !!
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
J'ai installé CCLEANER mais crains qu'il détruise des fichiers considérés comme étant des virus mais qui n'en sont pas comme par exemple "setup.exe". Windows Defender a complètement détruits des fichiers qui n'étaient en aucun cas des virus. Je n'ai pas réussi à les récupérer.
Dois-je craindre la même chose avec CCLEANER ?
Je vous remercie d'avance pour la réponse que vous voudrez bien me donner ...
Cordialement,
Eric
Не работает веб-камера
После последней настройки, с помощью вашей программы у меня перестала работать веб-камера и микрофон в программе Zoom. Микрофон удалось включить путем рекомендации от Zoom разрешения доступа приложениям к микрофону. Но решения с включением веб-камеры нету. Как решить проблему?
auslogic
Hi, sorry for my poor Englsh... I started reg clean in auslogic but it made some changes in my pc that I did not like. How can I make a recovery?
updates
i have updated the first driver in the list of drivers to be updated many times, why does it continue to on the list.
i update drivers 2 or 3 times a day but the list doesn't get any shorter,why.
The version of AMD software is no compatible with your current installed AMD graphics driver.
I have downloaded and installed the latest version of AMD Software Adrenaline Edition 24.1.1 and it worked just fine.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
But after the first reboot, all games stopped working and, when I tried to check AMD Software Adrenalin Edition, it says the software is not compatible with the driver.
Then, I have tried the AMD Software Compatibility Tool, that says everything is OK.
After a few uninstalls - with Revo Uninstaller total cleaning - and reinstalls, I'm still trapped in this loop.
So I'm contacting you guys to see if you can help me in this quest.
Thanks in advance.
Maintaining Boostspeed
The latest version appears to be 13.0.0.6. Do you intend to maintain this product? as rapidly as things are changing it appears this product is not going to keep up.
Change DNS
I am getting the message: 'Attempt to change DNS detected' Adapter: 'Wintun userspace tunnel #223'
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
How do I deal with this? There is a 'settings' bar but it does nothing when I click on it.
Thank you,
Geoff Parsons
Auslogics BoostSpeed が上手く使えません
マイクロソフトのエッジが邪魔をして、「稼働中のプログラムを全てを終了する」という機能が、突然使えなくなって、これを「手動で終了させよ」との文字が出ますが、出来ません。方法をご教示ください。また、何故、今までスムーズに出来ていたのに、何か私が間違えた設定をしてしまったのでしょうか?
Cubase and low DSP, ISR latency
Hello
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
I would like to choose best performance and kick off unnecessary apps and perform tweaks
to have best available DPC latency on my computer in order to make music production.
I have applied BootSpeed tweaks, also affinity for my NVidia GPU, uninstall unneeded apps, disable my intel speedstep, choose power plan to make high performance (disable sleeping for devices), I have updated win11, I disabled unused features such as bluetooth, fax and unneeded devices, disabled HPET etc., hw connected as possible - ports verified, more in detail, sfc and dism- processed, ok results, I provide also those steps and my configuration for your opinion on this in order to recommend me additional steps, or what to do more for best possible result in my configuration
I understand, that its a lot of information at once, I just spent time to get this information and collect and I can send my current configuration in order too.
In general, I have question related to DPC latency once I am able to go around 100 microsecs., but not less - the way is, that I have 20-50 microsecs and after some time I go to around 100 (highest dpc exec.time)
I also monitored performance and got ntoskrnl and dxgkrnl/nvlddmkm and ndis with a bit higher numbers caused this.
Focused on drivers, updated and measured, not sure, how to process with better configuration still - I have disabled sleep modes and disable ipv6 etc.
I use 128/256 samples with 24bit/48000Hz for my audio configuration, the same in audio card, same in my Cubase projects and I disabled internal audio card onboarded.
Any your suggestions, where to focus, those are very appreciated to get best performance possibilities for my music production mode.
Thank you in advance
Kind Regards,
Miroslav
enregistrement de la clé
Bonjour, je n'arrive pas à enregistrer la clé, à chaque fois et tant de fois le logiciel me demande enregistrer la clé activer la version pro.
Recovering Deleted Files
How do I recover my delted One Drive files that were deleted when I upograded to Pro Vestion 13