1859 questions

Напортачил...

Я перенёс папку "Загрузки" из положения по умолчанию на диск D, но не создал отдельной папки, и теперь "Загрузки" - это весь диск D. Получается бардак.
При попытке вернуть всё по умолчанию или перенести в другое место, пишет: "Не удалось сформировать список обычных подкаталогов в "D:\System Volume Information".
Отказано в доступе.

Как вернуть положение по умолчанию???
997 views
Oct 25, 2020 at 11:38 AM

Нужен ли антивирус если есть Bootspeed ??

Нужен ли антивирус если есть Bootspeed ?? Ваша программа спровляеться с вирусами и майнингами??

1009 views
Oct 24, 2020 at 04:09 PM

about mouse

my pc keyboard and mouse is not working properly
1086 views
Oct 24, 2020 at 06:27 AM

ask

i have licence for home version
and i install pro version
how can i back to home v
1058 views
Oct 23, 2020 at 04:28 PM

Logitech C920s

I have a Logitech C920s webcam. Everything was working perfectly fine until Wednesday evening. At that time I started doing a bunch of maintenance within BoostSpeed. Something in my system was changed, and now I get a BSOD whenever I boot my computer when the webcam is plugged in. If I remove the webcam from the USB port, then the computer boots fine.

I've run two different anti-virus programs (including your Anti-Malware) and I also have your driver updater. Plus I made sure that I have the latest version of Logitech's LogiCapture software. And it does not appear that there were any Windows updates (other than Defender) since last week.

So...at this point I cannot use my webcam and I'm fairly certain it was due to some change made within BoostSpeed.

Please help me fix this. Is there an audit log in BoostSpeed that shows what settings were changed?
1151 views
Oct 23, 2020 at 11:28 AM

WIndows Security closes when opened

Hi I'm Raffy and a New member of the Auslogics

When I open Windows Security Application it closes immediately

how do I fix it

1083 views
Oct 22, 2020 at 01:19 PM

PROVING

How to prove my performance specifically that mu processor is from type U
my device is : core i 7 8th gen
ram 8 GB
hard HDD 1TB
hard SSD 500 GB
NIVIDEA GEFORCE MX130
1035 views
Oct 22, 2020 at 01:46 AM

立ち上がり時間が掛かるようになった事への質問

当初起動時間が15秒程度でしたが、今は40秒程度掛からないとwindowsが立ち上がらなくなっています。立ち上がりの時間短縮の方法は、ありますか?
1122 views
Oct 20, 2020 at 06:43 AM

Dudas

¿Qué hacer si mi windows se traba?
¿Qué hacer si mi windows tarda mucho en apagar y reiniciar?

762 views
Oct 19, 2020 at 05:28 PM

Microphones disabled

After I installed Auslogics and ran all the tests, my camera and microphone were disabled. I managed to turn the camera back on but not the microphone even after going into my Privacy settings and enabling it. It happened on both machines, one with a Logitech headset and the other with a Jabra 510 speaker. Both microphones are still not functioning. Please advise. I am running Windows 10 on both desktops.
1174 views
Oct 16, 2020 at 04:14 PM

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?

1372 views
Oct 14, 2020 at 03:43 PM

Unable to make screen lighter or darker

I don't remember what I did when I used the Auslogics BoostSpeed 11 free version. I can't recover the previous windows versions, because they were deleted. I went to the recovery center and it didn't help me with retrieving my lost files. Prior to trying this software, I was able to control the brightness of my screen. I have tried to load the HP graphics, and it says that my computer doesn't meet the requirements.
1158 views
Oct 14, 2020 at 09:09 AM

Skipped traces

Lanovo with windows 10

Just upgraded to latest BoostSpeed 11 and have a problem I NEVER had with the precious version ~ 245 traces in the broswer SKIPPED! Made repeated attempts, alwys 245 skipped! Not good!-

PS, forcing a "Subcatagory" selrection makes ZERO sense. the categoriars are inane!

1055 views
Oct 12, 2020 at 10:59 PM

audio

Perchè quandop accendo il pc l audio non funziona?Devo sempre disabilitare i suoni?grazie

936 views
Oct 12, 2020 at 01:42 PM

Word Document Files

Does your Duplicate File Finder work only on image, video, audio, archives and application files?
How to find duplicate Word document files, pdf files etc ?

1419 views
Oct 12, 2020 at 04:46 AM

unidentified files following upgrade to Win 10 version 2004 prevent defragmentation

I have recently upgraded my Win10 x64 PC to version 2004 from Windows update. Prior to the upgrade the PC was clean and fast and the system drive was defragmented using Auslogics Defrag Ultimate. Fopllowing the upfgrade and subsequent cleanup, I ran defrag again and the drive now has approximately 20% of its used capacity filled with files that Auslogics Defrag will not identify (light green block icons, mouse click for file info invokes the prompt "This block contains file system service data. Detailed view is not available".

This is obviously some several GB of data judging by the number of blocks occupied in this manner - but I am unablæe to find out what these files are, what they are called, what purpose they serve or where they are on the drive. They are spread out across the system drive and thus prevent defrag running a free space defragmentation, and thus casue even more fragmentation when new files are added to the drive.

I have tried tio google this problem but have not found any reference to it. Auslogics defrag is the only untility that tells me these file exist - but no more than that.

Can you advice - what are these files, and how do I get rif them and run the usually perfect free space defrag?

thanks / Adrian
798 views
Oct 09, 2020 at 06:24 PM

Desktop

I have lost my icons on the desktop!
1028 views
Oct 08, 2020 at 02:28 AM

No reconoce Disco duro Externo

cuando conecto mi Disco Duro Externo, la pc no la reconoce.

1218 views
Oct 07, 2020 at 08:05 PM

Как корректно обновить программу Auslogics?

Здравствуйте. Сегоодня вышла новая версия программы и возникает резонный вопрос - как установить обновление? Придется полностью удалять старую версию (с помощью спецпрограмм типа Revo) и устанавливать новую? Или есть еще другой вариант?

912 views
Oct 07, 2020 at 08:12 AM

Lock-screeen blury

Hello!
When starting my computer (or when locked) I'm allways directly prompted for password or pin, whith a blury picture in background.
However I like those beautyful pictures and would like to see them clearly prior to logging in. What to do?
/Björn-Ove
1169 views
Oct 05, 2020 at 09:43 AM

Intel bluetooth drivers

Hi there, im having issues with my bluetooth headset. Sounds choppy. Tried unintalling my bluetooth drivers but they cant be found?

1399 views
Aug 06, 2020 at 11:12 PM

How to fix (delete) dead shortcuts?

After fixing of whole system {using default settings) I still see dead links to apps or files which have been moved or deleted while ago.

Ho to fix/delete dead shortcuts/links?

Thanks

1389 views
Mar 22, 2021 at 03:45 PM

BoostSpeed 12 clobbers Voice Recognition.

I am running Windows 10 Build 19042-2009 BoostSpeed 12 Pro. I use Microsofts Voice Recognition with Language Microsoft Speech Recognizer 8.0 for Windows (English - US). When I installed BoostSpeed and run the scan and resolve. It clobbers Voice Recognition. I get this error message after. "Speech recognition could not start because the language configuration is not supported.The recognizer language must match the language of the user interface." Checking the configuration shows that the language configuration is still what it was before it stopped working.

I run the rescue undo, and it still does not allow voice recgnition to run. I have to reinstall windows to get it to work. I have excluded Microsofts Speech folder from appdata and protected several keys in the registry to try to prevent this. Nothing I do seems to resolve the situation.
Please help.

Thank you
1385 views
Dec 26, 2020 at 01:58 AM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1385 views
Apr 29, 2020 at 10:41 PM

empty folder cleaner

Hi. When i go into empty folder cleaner it will find; i.e *582 empty folders, i press delete, and when its finished it says 520 empty folders found and deleted 258 of them. They go to the recycle bin, which i then empty, but when i do a re-search for empty folders they are all back again. It never actually clears the whole amounts found. *These are the actual readings of my last scan, but the numbers are very close to what they are with every scan. Can you help please? Clive

1382 views
Oct 05, 2021 at 12:00 PM

Система пишет , что принтер не подключен

Доброго времение суток! После сканирования компьютера Boos и обновления драйверов с помощью Вашей программы, система стала выдаать ошибку 45 при раюоте принтера HP 1020. Как это исправить?
1381 views
May 18, 2020 at 02:51 PM

Regular luz de la pantalla

Quiero saber porque con windows 10 no puedo regular la intensidad de luz de la pantalla. Quiero aumentar o disminuir su intensidad de brillo y no puedo.

1380 views
Nov 27, 2019 at 11:03 PM

administrator blocked auslogics

I have been using auslogics for multiple years now... I recently bought another key today. Today the software wont open because it pops up with a message indicating this software has been blocked by the administrator. However, I am the administrator.... So I am confused because now I can not run the auslogics software. Can you help.



Kind Regards,

Michael Figueroa
1380 views
Jan 19, 2022 at 10:17 PM

PC Crashing/Freezing

To Whom It May Concern,

In recent weeks, I have been experiencing intermittent crashing/freezing of my PC. This sometimes happens 1/3 times a day or I can go a few days without it occurring at all. It is not, actually, a BSOD - just a "straightforward' freeze or crash.

When accessing the Windows Event Log, the common denominator would appear to be identifed as follows:

Unable to open the Server service performance object. The first four bytes (DWORD) of the Data section contains the status code.

I would consider myself reasonably computer savvy, describing myself as a software 'Geek', in addition to having set-up remote computing facilities. However, this is difficult to readily identify and despite, browsing the Internet extensively, I find I cannot resolve or prevent this from crash from occurring.

The only 'fix' I have reviewed is accessing 'Windows Services' that requires the 'Server to be restarted' but as this is already running (having reset itself?) I cannot, actually, do anything:

https://social.technet.microsoft.com/Forums/en-US/cd53a3ed-3833-4a62-8784-2ab3fa0c464e/unable-to-open-the-server-service-performance-object-the-first-four-bytes-dword-of-the-data

Any advice, recommendations or support you an afford me would be very much appreciated.

I am grateful for your attention, time, effort and anticipated co-operation in assisting me to resolve this perplexing and frustrating issue.

Kind regards to you and your colleagues at Auslogics

Ian

Ian Willsher
1379 views
Nov 03, 2020 at 11:11 PM

disk defrag integrated into boostspeed 11.5

I have both the boostspeed 11.5 and the defrag ultimate
Question:
It seems like the integrated defrag in boostspeed 11.5 is the old version not the new ultimate

What would be the advantage of getting the ultimate version if it is not integrated - what does the integrated version NOT do that the ultimate version does?

1378 views
Jun 17, 2020 at 06:05 PM

Cannot get my computer to read SD cards

I've used your device driver updater and still cannot get my computer to recognize an SD disk.

1377 views
Jun 25, 2020 at 09:54 PM

I just upgraded from 10 home to 10 pro

I recently upgraded my ASUS ROG G551JW from Windows 10 Home to Windows 10 Professional. After upgrading and re installing my apps, running some Auslogics tools, and updating my drivers. I seem to have like every Add On installed and a bunch of virtual this or virtual that, Vwifi and Vethernet. My External SSD (disk letter G) is gone, Ive always had the external SSD running Read and Write to basically have it help the computers performance. I cant Install some apps or change some setting because i will either get some kind of error or it saying that it cant be done on sysWOW32 or 64 im not sure, but something like that... I would greatly GREATLY APPRECIATE if a Tech at Auslogics can remote connect to my pc and take a look at what ever problems he may notice. I received 3 questions when I joined pro and this is my last available question and would really love to have someone who knows about computers, to take a look at it. THANK YOU. Stay safe everyone...

p.s I added one screenshot i had of one of the many problems im encountering.
1376 views
Jul 06, 2020 at 06:56 PM

старая программа на дисе (с) 64 битная называется 7 максисальная

как я могу убрать лишние файлы и програмы остатки 64 битной системы,очистить диск (с)

1375 views
Feb 10, 2020 at 02:40 AM

неисправность воспроизведения через блютус

музыка через блютус стала подклинивать

1374 views
Jun 20, 2020 at 05:15 PM

windows 7

I can't install windows 7 SP1

1372 views
Jun 06, 2020 at 08:38 AM

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении

Ноутбук не включается без подключения к сети переменного тока и выключается при её отключении.
Обновил всевозможные драйвера, обновил биос(правда теперь появилась надпись при запуске "Checking media...").
Проверил состояние батареи через консоль(часть отчета прикрепил файлом) и там осташееся емкость 12 октября остановилось на одном значении, т.е. батарея не заряжается и не разряжается.
Что делать в данной ситуации, чтобы ноутбуком вновь можно было пользоваться автономно?

1372 views
Oct 14, 2020 at 03:43 PM

selezione cartelle

Salve, vorrei sapere se nella versione registrata si ha la possibilità di selezionare le cartelle riguardo alla ricerca di duplicati o altro ?
cosa che invece non mi è stata possibile nella versione di prova del vostro "AUSLOGIC BOOTSSOEEDE11-
UTILIZZO windows 7
Grazie Massimo

1371 views
May 11, 2020 at 10:14 AM

ssd external defrag

I have an external drive, SSD, attached to my computer thorugh usb3.
When I try to optimize it, it takes forever, and seems not to move along....is this an issue? or how can I defeag the external?

Thank you
1370 views
Sep 21, 2020 at 01:37 AM

not fixed

Hi I found your website on the promise that it would sort out the 8000ffff eroor? It hasn't, can it be sorted?
1370 views
Dec 30, 2020 at 11:02 PM

Disable Edge Swipe in Win10 B2004 update

Hi Folks,
Thx much for your help on prior question!

Please tell me how to permanently, (as in no 'edge swipe restart' on system restart), disable Edge Swipe.

F&*!#ing MSFT does it again; Win10 uppdate 2004 kills cortana local/system search ability, which disappears even finding any settings re Edge Swipe.

Please tell me how to kill kill kill kill forever Win10 Edge Swipe.

Thx very much, Folks!
Scotty :-)
1370 views
Jul 23, 2020 at 11:45 AM