1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1157 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Не работает Скайп и Outlook после установки новой версии

Если раньше после установки новой версии переставал работать скайп, то сейчас и Outlook перестал работать....
Скайп не делает звонки
А Outlook не грузится вообще....
А вроде бы раньше неплохая программа была....

1369 views
Jan 05, 2020 at 01:38 PM

Csnnot access new PC from other PCs on LAN

I have a private home LAN with three Windows 10 PCs that are sharing files & folders among themselves with no problem - I just click their PC name under Network in File Explorer. Problem is, I just set up a new Win 10 PC but when I click on that new PC's name under Network in File Explorer on any of the existing three PCs I get an error msg saying I don't have permission to access the new PC.

I made the new PC discoverable and not pwd-protected, just like the other three. I set up the Documents folder in the new PC to be shared by Everyone with Full permissions. All four PCs are running Win 10 (ver. 2004). All are wired Ethernet desktop PCs except one existing PC is a Wi-Fi laptop.

This situation is weird because everything works fine when I go to the Search box (next to the Start icon) on any of the other PCs and type \\NewPC\Users\UName\Documents\. The same good result occurs when I set up a shortcut targeting \\NewPC\Users\UName\Documents\.

There is no hardware/connectivity problem because the new PC is seen by all the others and I can access the shared Documents folder\files in either of the two ways just described above.

Am I missing a setting, or something else? Thanks for any help.
1364 views
Dec 08, 2020 at 01:58 AM

Проблема со спящим режимом

Здравствуйте! Исчез совсем из настроек системы спящий режим, после работы программы, помогите исправить, заранее спасибо за безпокойство...

1364 views
Jan 30, 2020 at 03:31 PM

Edge Chromium

I have the new Microsoft Edge Chromium browser. Boostspeed does not recognize this browser. It will only clean Internet Explorer and the original Microsoft Edge browser. Is there an update coming with Boostspeed that will include this new browser? If so, when?

1357 views
May 17, 2020 at 02:42 PM

Issues Microsoft Flight Simulator (FS2020)

Hi, I have been a customer of yours for a long time. I am satisfied with the software but now I need to ask a question or rather a report.
I have the license for 3 PCs, and on one PC I have the new MSFS FS2020 simulator. Thanks to the backup I restored the files. The problem is that after deep cleaning privacy, traces in applications, empty folders, registry files, Windows system files could no longer start the game. I thought to warn you and I hope that the problem is solved. Thanks and sorry. My configuration: CPU i7-8700.... Windows 10 PRO.... RAM 48 Gb.... HardDisk M2 NVME samsung 1Tb.... GPU RTX 2060.
1356 views
Oct 01, 2020 at 12:43 PM

Медленно загружается

Медленно загружается, особенно Google. Что делать? Версия Windows 7 Home.
1356 views
Nov 10, 2019 at 07:11 PM

battery not charging

my battery is not charging. i lost the invoice from the assus dealer in goa, india namely INTECH COMPUTERS, Porvorim, Goa. He is not giving the duplicate. checked online and saw that the warranty of this laptom expires on May 27, 2020, whereas I bought this laptop in April 2020. I smell something fishing with this dealer. took it to service centre, they say that warranty expired as above, and if at all they can help they want the invoice.

1355 views
Nov 12, 2020 at 12:01 PM

Не получается запустить.

Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)

1353 views
Dec 22, 2019 at 10:39 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1350 views
Apr 16, 2020 at 08:42 AM

Wireless not working

Hi,
I ran a cleanup of the system yesterday and it siad it would enter a new driver for me. I said OK and now the wireless is not working. I have reinstalled all files that I thought may contain the information to no avail. What can I do to rsolve this?

1346 views
Sep 12, 2019 at 10:56 PM

Use of BoostSpeed Pro 11 on my wife's computer

8 November 2020

Dear Sir or Madam:

Good morning.

Could you please tell me if I can use my BoostSpeed Pro 11 on m wife's computer, and if so, how do I do it?

I look forward to hearing from you.

Yours sincerely,
Murray Christianson

1344 views
Nov 08, 2020 at 02:47 PM

Re-enable the Windows key on the keyboard

How do I Re-enable the Windows key on the keyboard. Something in Boostspeed disabled it.
1341 views
Nov 14, 2022 at 05:14 PM

Demande Information

Bonjour,

Comment faire pour Rechercher des fichiers doublons sur un Réseau NAS

Avec mes remerciements

Courtoisement

Jacques LOGEAY

1341 views
Jul 18, 2020 at 06:14 PM

Your help please

I called tech support to fix the follwintg problem "rquires elevation" I am still getting the same thing on numerous sites. Is there
no one that can fix this? Tried you on line solution but it does not work as described.

1341 views
Jan 03, 2020 at 04:44 AM

Cannot install new version of Pro v11.xxx

Whenever I get the message "a new version 11.~ is available, the download completes but will not install.
Check snip pic attached.

1341 views
Feb 01, 2020 at 05:27 PM

Paired but won't connect

I've tried everything to get my Sony bluetooth headphones to connect automatically, it is paired in "Devices" but when I switch the headphones on they wont connect, I have to go into Settings - Devices and physically connect by pressing the connect tab, I've tried going into "Services" then scrolling down to "Bluetooth Support Service", stopping it then restarting it, it just won't restart properly, the green "curtain" only goes about 15% accross before stopping i.e it has'nt restarted properely, any ideas!!!!
1339 views
Jul 14, 2020 at 11:04 AM

DWM.exe

Hallo,
warum geht bei obigem Prozess ständig meine CPU derartig in die Höhe, dass oft 40-50% davon verbrucht wird.
Sobald ich mehr als zwei Aktionen durchführen will, Internet und ein normales Programm, w.z.B. BoostSpeed,
dauert es ewig bis sich was tut.
Ich habe shon etliche Dinge mit dem Boost Speed eingestellt und verbessert, aber große Änderungen hab ich
bisher nicht feststellen können.
1338 views
Jun 15, 2020 at 04:17 PM

Video issues

Hi There,
I can be happily working along, and if I need to see a video file, I can... but then, sometimes it stops, and I cannot make the video work again.
I have Driver Updater, but if I reboot the computer, the video function will work again.
Sometimes, if I run a BoostSpeed scan, the video might work again. It can still stop again, but if I Boost Speed again, it may not make the video run again.
So I have to reboot again instead, which is pretty time consuming.
My initial thought is I'm missing video drivers, but i have Driver Updater.
Can you advise and help me?
1338 views
Nov 03, 2020 at 06:14 AM

Windows Key

My windows key on my keyboard does not work and I have tried to run different tasks in the task manager and several other things but nothing seems to work. I saw on your website that this program can help.

1337 views
Feb 22, 2020 at 04:07 AM

Windows upgrade

Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?

Regards
Petar

1334 views
Dec 19, 2019 at 08:58 AM