1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Compare configuration changes in boostspeed

I have your software in three computers as the license allows, but I can't find how to compare configuration between them, specially in the custom scan and clean for boostspeed. For example in one computer my login screen still shows the photo microsoft chooses, but on the other it doesn't. Maybe you have that in a config or xml file. It may be good to be able to compare.

Regards,
Paul

1334 views
Apr 16, 2021 at 07:48 PM

Blue Screen Stop Code

I get : Kernel Mode Heap Corruption

1332 views
Aug 24, 2019 at 12:26 PM

UsoClient

Hello Auslogics

It seems that every day I get a warning message about a new 'Daily' task being created. That task is UsoClient (see attachment). There always seems to be three occurences of this program, despite this – so I guess that it is being deleted and recreated by Windows.

No doubt this is a Windows thing, but it would be good to understand what is going on here.

Also, if I try to disable it, despite being a local admin, I get an 'insufficient privs' error (see second attachment).

If this is deemed normal behaviour and the program is trustworthy, is there a way of disabling the warning message, but just for this one program?

Thanks and regards
Phil Parkin

1332 views
Dec 28, 2020 at 08:41 AM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1331 views
Apr 20, 2020 at 08:19 AM

Error al actualizar windows

Hola soy Jose, tengo un problema al actualizar mi windows me sale siempre el error: Error de descarga: 0xca00a000 tengo una tarjeta grafica AMD
1331 views
May 19, 2020 at 04:21 AM

Pro Version

Considering the trial version does the job of speeding up my computer, what is the cost of the Pro Version?
1327 views
Dec 22, 2020 at 02:05 AM

ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается как раньше.

Здравствуйте!

Ноутбук Dell перестал распознавать оригинальное зарядное устройство Dell и АКБ не заряжается так как раньше.
Ноутбук был приобретен новым и я единственный владец. Раньше всё было в порядке. Установка вашего ПО и запуск всех инструментов пока ничего не дал. Я не могу понять в чём причина?
Ваш софт и фирменный софт Dell сообщает что АКБ находится в отличном состоянии. Сама Windows 7 pro показывает что АКБ подключена к З/У, но сообщает что АКБ не заряжается. АКБ не заряжается даже при полном выключении или перезагрузке ноутбука.
Как решение я вижу возможность также перепрошить BIOS. Пожалуйста, помогите решить вопрос.
Спасибо!

С уважением,
Николай
1327 views
Apr 15, 2020 at 07:08 AM

ANTI-MALWARE PROGRAM CONFLICT W/NORTON SECURITY

Hello - I have your Auslogics Anti-Maleware program and recently added Norton Security. Norton security runs scans in the backgound and for some reason goes after the anti-malware prgram, esentially erasing it. However it leaves my Auslogics BoosSpeed & Auslogics Driver Update prgrams alone, so they continue to run fine. Now every day I have to re-load the anti-malwar program.
I went into Norton checking the Virus & Firewall settings which are set to "allow" your anti-malway program , but it still continues to erase the entire anti-malware application. Do you have any ideas on how to fix this in Norton..?

1326 views
Mar 21, 2020 at 11:42 PM

Auslogics BoostSpeed 12 после проверки сисстемы блокирует и выпиливает AdGuard из сисстемы

Доброго времени суток. Уважаемые разработчики, я давно пользуюсь вашими программами, в том числе и Auslogics BoostSpeed. За последнее время я пользовалась Auslogics BoostSpeed 10 и всегда всё было без сбоев. 23 мая 2021 года я решила приобрести Auslogics BoostSpeed 12. С установкой программы не было проблем. Но после сканирования и выполнения оптимизации устройства у меня перестал работать AdGuard и не просто перестал, я его не могу даже переустановить. Пришлось мне переустанавливать всю сисстему заново. До этого проблем с AdGuard не было у Auslogics BoostSpeed 10. Мне бы не хотелось удалять Auslogics BoostSpeed 12 и возвращать свои средства. Помогите разобраться, что нужно сделать, что бы Auslogics BoostSpeed 12 не выпиливал и блокировал AdGuard из моей сисстемы, т.к. я давно пользуюсь этим программным обеспечением и он меня полностью устраивает (лицензия оплачена). Я бы понимала, если бы он выпиливал, но сам заменял функции AdGuard, но после выпиливания данной программы я полностью остаюсь не с защищенным интернетом и с кучей не нужной мне рекламы. Как вы понимаете меня это не устраивает совсем. Очень надеюсь на помощь в отладке вашей программы с программой AdGuard. В противном случае мне придется откатить Auslogics BoostSpeed 12 до Auslogics BoostSpeed 10 и вернуть потраченные средства. Но еще раз повторяю, я не хочу этого делать, а хочу полностью разобраться в данном конфликте программю Так обе эти программы мне нравятся.
1323 views
May 24, 2021 at 05:57 AM

NVIDIA 제어판이 안 켜져요

NVIDIA 제어판을 열려고 하면 계속 '현재 NVIDIA GPU에 연결된 디스플레이를 사용하고 있지 않습니다.' 라고 뜹니다. 어떻게 하면 돼나요?

1323 views
Jun 28, 2020 at 03:19 AM

гибернация

Здравствуйте! прошу помочь. после гибернации комп сам через несколько минут включается. зарание спасибо.

1320 views
Jun 27, 2020 at 03:23 PM

RDP keeps disabling on every machine that has boostspeed installed

I have my own domain with a virtual environment as well as several physical endpoints (mostly laptops). None of the virtual machines have boostpseed installed, only the majority of the physical machines. I have RDP enabled by group policy.

I notice that intermittently (seems to do it when it wants to), if I reboot a laptop or other physical endpoint, the machine will boot up with the "termservice" disabled, even though groupm policy enforces this to be on.

After troubleshooting group policy, uninstalling all other security software, and weeks of various other troubleshooting methods, the only commonality I can find is that all the machines that do this have boostspeed installed.

I found this post
https://qa.auslogics.com/question/225

And followed the instructions there. I also turned off the performance monitor in boostspeed via the settings, but the issue is still persisting. My next step I guess is to uninstall boostspeed from all of my machines but I figured I would reach out before I give up on the product.
1319 views
Oct 26, 2020 at 01:20 PM

原因不明起動しない

Windows 10 64
症状
電源を押す
電源ボタンとその隣の起動ボタンが伝統する(チカチカ。。。正常)
1分後消える
数分後 画面に「修復している」と出る
その後様々な修復Optionが出るが、起動していないので何もできない
。。
同じことを繰り返していると突然起動できる(現在のように)
上記の状態が前触れもなく発生する
1318 views
Oct 04, 2020 at 12:51 PM

Crackling sound after few hours

Hi, thank you for your time,

After a few hours of my computer being on, all sounds from the PC will have crackling sounds. There is nothing in particular that triggers it. No specific amount of time before I start to hear it. It has been happening for quite some time now

Thank you
1317 views
Jan 09, 2022 at 06:06 PM

How do I stop starting up when I start the computer

When I start up my computer, PCTuneUp starts up. How do I prevent this from happening.

1316 views
Feb 20, 2021 at 02:58 AM

Error 1605 and 1628

I am facing problem about error 1628 and 1605,can you help me to solve this problem?

1314 views
Dec 08, 2019 at 07:39 PM

Internet Explorer re install

Bonjour !

J'ai besoin d'utiliser internet Explorer pour activer un service (système d'authentification qui ne fonctionne qu'avec IE)
Or je ne trouve plus IE sur mon poste. Il n'apparait pas dans Panneau de configuration\Tous les Panneaux de configuration\Programmes et fonctionnalités\Activer ou désactiver des fonctionnalités windows

Je ne me souviens plus comment je n'ai dé"sisntallé, et je me demandais :
- si c'est un tweak de Bootspeed qui l'a désinstallé?
- comme faire pour le ré installer?

J'ai essayé de le re téléchargé en online et en offline mais impossible de termienr l'installation. Soit un message me dit qu'une version plus récente est installée, (Edge), soit l'installation s'arrête sans message d'erreur.

Merci !
Sylvain

PS : la sous-catégorie est obligatoire, mais Internet Explorer n'était pas listé, j'ai donc choisi une valeur approximative

1313 views
Jun 30, 2020 at 09:31 AM

WordPad problem

Have tried (for years) to learn WORDPAD to start-up in landscape and not portrait. That goes for saving 'in Landscape' and seeing it change to Portrait when opening the member. (HRMPF)

Think, it's the only problem I have with my PC and now ALL problems in the future are taken good care of with your comprehensive
system, thank you.

Regards
Henning Reckey
1313 views
Jul 02, 2020 at 03:06 PM

Disk Defrag

Hello

what are the differences between Disk Defrag Pro and Disk Defrag Ultimate ?

If I installed Disk Defrag Ultimate, can I uninstall Disk Defrag

thanks
Paul

1311 views
Dec 12, 2020 at 09:44 AM

Windows Security - Account Protection

"Dynamic Lock is not working because Bluetooth is off."

I do not know what device to try to turn on to Bluetooth.

Thanks in anticipation.

Mike Kemp

Mobile:

Content hidden to protect privacy

1310 views
Jul 17, 2019 at 08:37 AM