1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Driver update

Hello,

Subcategory is not correct (cannot select something else), please ignore.

I get a message from the driver updater that a driver is not up to date.
It is about PnP-Monitor Lock
It says:
Outdated driver 16.10.46.576 of 21/01/2019 Remote Utilities LLC
New driver 1.0 15/06/2015 BenQ Inc.

How is it that a newer driver is outdated?
Should I install the older driver?

1253 views
Aug 04, 2021 at 02:06 PM

activate windows 10

I was on Insider program which loaded enterprise edition a few years ago.

When computer crashed it reloaded a windows 10 home and now wants me to activate the 10 program. I paid for a win 10 home edition but it will not accept the activation code because of the enterpirse edition I just use without the activation. I tried talking to microsoft and not any answer.

PTGinter

1252 views
Jun 22, 2020 at 01:49 AM

Double Clicking

Lately (last several weeks) the vast majority of my on-screen selections require a 'double click' on the mouse in order for advancing. How can I correct this so movement on-screen can be accomplished with just a single click on the mouse? Could this be an associated problem with Boostspeed's notice of "Hish system resource usage detected' and I "might experience extreme PC slowdown"?

1252 views
Jan 31, 2020 at 02:56 PM

Cant Access app

I can access everything on my computer except for a application and winrar after updating my windows.


It shows Windos cannot access the specified device, path or file. You may not have the appropiate permissiong to access the item. I reformated my pc and its the same.

1251 views
Jun 15, 2020 at 10:42 PM

Cortana

I have removed Microsoft edge and Cortana from my computer but on start up it shows in the Event Viewer that there is always 2 errors relating to searching for the Cortana package (Appx PackageSync). Just wondering if you know how I can stop my computer from looking for Cortana at all.

Regards
John
1250 views
Dec 08, 2020 at 12:25 AM

how to find and permanently scrub wipe erase delete WIN10 VSS/ Shadow Copy files

Have disabled VSS ok.
Can find no way to erase existing files created by VSS, and they have eaten up neary 50% of my hdd over the last year.

Any help much appreciated!

Best Regards,
Scotty :-)

1249 views
May 24, 2020 at 08:18 PM

Disk Defrag

Why does Auslogics Boostspeed 12 recommend doing an SSD defrag when all the experts say that an SSD drive should not be optimized because it decreases it's life span?

1248 views
Apr 23, 2021 at 12:39 PM

обновление windows10

сколько трафика примерно нужно потратить для обновления windows 10 версия 1909 до версии 2004 в гигабайтах

1247 views
Jun 15, 2020 at 05:11 AM

Boost speed does not recognise pro

I have been using pro version for several years now it asks me to activate pro which it rquires me to pay for which is totally wrong as I renewed my subscription in 2021. It also tell me that an admistrator has blocked me opening the program, this is aloso wrong as I am the system operator and have not blocke Boostspeed. I have re- installed the program and re entered the key 3 times so far it will not work correctly as it tell me tah I don not have pro which is WRONG.
Colin Summerfield
1245 views
Jan 21, 2022 at 10:59 AM

Unable to download standard apps like calculator etc

I am using Windows 10 Pro Version 20H2 OS build 19042.964. recently some of the basic windows apps like Caculator, Calendar etc are not working in my system. Windows Defender firewall is also not running. Any solutions please advice.
1244 views
May 05, 2021 at 12:50 PM

MSCONFIG settings

I am curious , do you have settings needed for faster start ups of the msconfig settings ? For it will make start ups even faster in windows 10 or more than likly even in windows 7 & 8 as well.

1244 views
Mar 10, 2020 at 05:02 PM

Windows 10 Reliability Monitor issue.

I am using Windows 10 20H2 version and BoostSpeed 12 new version.
Control Panel>Security and Maintenance>Reliability Monitor activated history is not available but for 1 day, no computer
reliability and problem history is shown in the graphic display. I have a lap top computer with the same setup as my desktop
and deleted BoostSpeed 12 from the laptop. The reliability and problem history started to show up on the chart. I conclude that there is something in the BoostSpeed software that is affecting this control panel issue. Got any fixes?
1244 views
Dec 30, 2020 at 04:42 AM

Synchronisation

Guten Tag,

ich will die Synchroniation wieder einschalten. Den Tweak wieder Rückgängig machen.
1244 views
Jan 24, 2021 at 01:00 PM

Discounts

Hello Team!

Have been using a free version of your BoostSpeed program and liked it a lot. Thank you for such excellent software. I was wondering if it's possible to get a discount on the pro version as I would really like to use it fully.

Thanks
1243 views
Oct 29, 2021 at 04:51 PM

slow running windows

do i need to change my windows ? its 10 but its very old

1239 views
Mar 08, 2020 at 12:56 PM

Сброс настроек входа в систему Windows

Добрый день!
Каждый раз при использовании сканирования системы утилититой, после перезагрузки сбрасываются пароли для входа в Windows. Настройки сканирования ни к чему не приводят. Спасибо.

1238 views
Aug 09, 2021 at 03:41 PM

No generic, or cliche answers and then a subjective hardware ?

Please dont "mail" this in! I am realtively PC savvy, not an IT genius, but I built this PC and have a little knowledge about a lot of things but I want to know hidden or not-well-known settingsto enhance speed and performance of my PC ...so What tweaks should I implement or adjust, that BootSpeed12 will do for me, to get the fatest possible PC? IE dont tell about turning off start up apps or processes etc, I already knoiw that... and lastly...
what should be next PC build under $1000 (not including monitor) give me CPU, HDD,RAM and GPU specs
Impress me!
This is not really a right or wrong answer so pleae cosult your collegaues because it will be challenging to surprise or impress me but there are so many settings on this software that there are bound to be 'Illuminati type of stuff
1237 views
Jan 13, 2021 at 10:55 PM

Start Menu Disappeared

A few weeks ago while using Windows 10 on my desktop computer, the monitor momentarily went black then came back on. But since then the Start Menu is totally missing. After clicking on Start button, an error message comes up now.

1234 views
Jan 13, 2020 at 05:11 PM

error code 46362C1-0B211304-00000A09

This error code has been stopping me from opening numerous files. I cannot find any solution to it on MS error code site.
It has been driving me crazy for months now.
46362C1-0B211304-00000A09
Thanks,
Jim
1233 views
Oct 27, 2021 at 07:38 PM

Windows 10 Restart Stalls

I recently had to do a Windows re-install (repair technician did in shop) because of BSOD issue related to dell driver. I bought BoostSpeed 11 to try keep my PC in good operating condition and help with many of the Windows issues including fixing a restart problem. Since the re-install of windows, restart actually restarted just once. Now when try restart it just goes through the motions, on screen message says restarting windows and monitor goes dark (power is on) but restart does not happen. I wait 5 minutes and then press power button to shutdown. I repress power button to bring windows back on. Windows 10, using this method takes usually between 45 to 60 seconds.

If it wasn't for windows updates I could live with not using the restart option. However, windows update requires the restart so I expect it to fail each time there is an update. Recently did scan and did the suggested tweaks in the Maintain section of BoostSpeed 11. Any thoughts or suggestions?
1233 views
Aug 08, 2020 at 02:50 PM