1859 questions

Running a scan

When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.

Unused application files

C\windows\software distribution\datastore\logs\edbtmp.log

Could you help me resolve pleaase.

1001 views
Apr 14, 2021 at 08:05 AM

werid big files on my D drive

Today I use the disk explorer and found this:
see file.
Idk what is it?
Should I deleat it or keep it?
1195 views
Apr 13, 2021 at 09:26 PM

Проблеммы при использовании виндовс 10

Добрый вечер!
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.


Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.

Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.


Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.

1158 views
Apr 12, 2021 at 02:40 PM

Screen Size

Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.

Chales Waltz

Content hidden to protect privacy

940 views
Apr 11, 2021 at 03:29 AM

ERROR 80073712

WINDOWS 7 ULTIMATE 64 Bt. SERVICE PACK 1.
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
986 views
Apr 10, 2021 at 08:00 PM

System Booting

When my system boots when i come to user login screen when I try to type my password and click suddenly it goes black it becomes again and again I have to power shutdown suddenly but it allows me to login properly.
869 views
Apr 10, 2021 at 05:05 AM

определение местоположения

Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.

773 views
Apr 09, 2021 at 04:28 PM

Интернет-соединение

Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо

1033 views
Apr 08, 2021 at 07:05 PM

Installing Auslogics boost speed

Can Auslogics BoostSteed be installed on a second computer?

1048 views
Apr 08, 2021 at 01:17 AM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

activacion Pro

Por favor quiero actualizar mi version a Pro

933 views
Apr 03, 2021 at 10:27 AM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

graphics card

what graphics card should i upgrade to to get 8.5 rating that your software sujest for me to do
1131 views
Apr 02, 2021 at 03:28 PM

Postgrest SQL_Службы Microsoft

Добрый день!

Вот тут два скрина.

Первый скрин это сама проблема

Второй скрин на что это влияет.
871 views
Apr 01, 2021 at 02:28 PM

Computer Freeze on Restart and Shutdown

Hello,

Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.

Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.

The only way I can shut down my computer when all of the above happens is holding the power button down.

Eli

1760 views
Mar 29, 2021 at 02:21 AM

windows 10 up grade

how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.

1066 views
Mar 28, 2021 at 11:08 AM

If the internet is cut off around the world

how offline activation future / BOOSTSPEED 12 PRO / key /

Content hidden to protect privacy
/ If the internet is cut off around the world

990 views
Mar 27, 2021 at 09:53 PM

no sound, drivers not there

Hi! I've used boostspeed for maybe a year or so, and recently driver updater. Somewhere since driver updater my computer has been off. Also, it should be mentioned that my computer will no longer even work with driver updater. Driver updater turned my computer into a nonfunctional brick, that couldn't even get past boot up. It took me a long time to reset it back to where it was. The driver updater program no longer works on my computer. I tried running it 10 times, each time driver updater program crashes and sends you guys a report.

Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).

I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."

So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.

I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
1412 views
Mar 26, 2021 at 10:52 PM

Something happen to this device after i ran internet optimization

Sunday I had to re-install windows 7 on my computer. After gettting all the updates, drivers etc. I installed Auslogics Boostspeed 12 on the computer. After running the internet opimization my interenet connection went to hell. I called my ISP and after testing on another PC and Laptop (wired) it had nothing to do with my connection. I even took my desktop and laptop to my brothers who has a different ISP with the same slow results.
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached

Please Help. I am beyond frustrated at this poing.
Mike

I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
1189 views
Mar 25, 2021 at 07:30 PM

Printer does not print...

Greetings,
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.

When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.

By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!

Thank you... hope you can help...
Al Sosa
1436 views
Mar 25, 2021 at 01:02 PM

Malware

can auslogics check for malware?
C:\Program Files\Supremo Tribunal Federal\Sistema Operacional Microsoft® Windows®\ subfolder

this just showed up in my startup today - never saw it before and from what I read can be OK or can be an infection

I need to know if it is OK to keep it or try to remove it

1217 views
Aug 26, 2020 at 02:08 PM

Print spooler issues

My computer keeps dropping its print spooler. I reload windows and it works until I install Auslogics Speed Booster. Any fixes?

1216 views
Jun 26, 2020 at 08:49 PM

Formula not working correctly

when formulating a two page expression, the first page is not reading the second expression. I have given you the two formulas - I would hopefully like to have this sorted; if possible.

the first one should denote the year: In this case 2020

=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))

The second shouldgive me the first day of the year:

=IF(MONTH($A$5)<>MONTH($A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1)),"",$A$5-(WEEKDAY($A$5,1)-($I$2-1))-IF((WEEKDAY($A$5,1)-($I$2-1))<=0,7,0)+(ROW(A7)-ROW($A$7))*7+(COLUMN(A7)-COLUMN($A$7)+1))

Question, is this even possible?

1216 views
Oct 01, 2020 at 01:28 AM

Режим сна

Ноутбук периодически внезапно сам уходит в режим сна, хотя данную возможность я выключил. Происходит в любое время и в любой момент. Хоть в браузере сижу, хоть в игры играю. Резко гаснет экран и ноутбук оказывается в режиме сна из которого потом приходится выходить
1216 views
Jul 30, 2020 at 10:34 AM

stop removing saved information during cleanup

how to keep boostspeed from removing my passwords and form data information from edge browser. I saw it once, but like everything, I cant find it now (LOL)

Thank you

1216 views
Jan 21, 2020 at 07:38 PM

Windows 11 beta

Hi,
Next week I'll be updating to Windows 11 will I still be able to use Boostspeed on that OS without doing any damage?
1215 views
Jun 16, 2021 at 06:58 PM

Flash drives

All of my flash drives are not recognized, irrespective of the USB port, I use. How do I reactivate the USB ports so as to recognized the flash drives?

1215 views
May 20, 2020 at 07:16 AM

free space

im trying to get this game called genshin impact, however it says i need more space despite the fact that i deleted everything that came to mind whether it would be pictures or games, i even tried to uninstall things from settings
i need help, apparently theres nothing else i can delete but i know for sure there is another way

1215 views
Jan 15, 2021 at 07:33 AM

Regarding default setting problem

I am unable to set WORD 2016 as my default app, i tried all the solutions i came accross but could not do it, clarify and resolve it kindly

1214 views
Jun 16, 2020 at 03:55 AM

Malware install failure error

see attached. This happens every time. Chrome, Brave will not allow. Edge gives error.

1214 views
Feb 21, 2021 at 10:49 PM

Printer not connecting

Hello!
I recently used Auslogics to clean my computer. I believe I went to "optimize" to perform a deeper clean up. The question came up at the end to clean which I clicked on. My printer is now showing default, I cannot get it to connect to my internet either by the "wizard" or manually. HELP!!!
1214 views
Oct 01, 2020 at 03:56 PM

Logging in to dashboard

How can i put a shortcut on Start page (or Taskbar) to log in to my Auslogics dashboard?

1214 views
Jan 15, 2020 at 10:40 PM

logiciels office

Les logiciels office ne se lancent plus
1213 views
Aug 25, 2020 at 03:08 PM

Диск содержит ошибки

При сканировании Disk Doktor пишет что диск C содержит ошибки но при исправлении и глубоком исправлении все равно пишет диск содержит ошибки. Другие программы Auslogics пишут что все диски впорядке. Это ошибка программы или что ?
1211 views
Feb 21, 2021 at 04:08 PM

Unable to Send / Receive emails

Since installing your software I am now unable to receive email via MS Outlook -

1211 views
Apr 08, 2020 at 06:38 PM

BootSpeed 12 installation software

I just bought an additional laptop can I use my paid subscription and install it in my computer

1211 views
Mar 02, 2021 at 09:47 AM

Uninstall manager

Можно вернуть в Uninstall manager
количество установленных программ? куда то пропали...
Спасибо.

1210 views
Mar 09, 2020 at 08:59 PM

No sound after connectin phone with bluetooth

Sometimes i like to connect my phone to my pc with bluetooth so i can listen music while playing games (is easier to change music or control volume). Today i connected the phone to pc, it shows is connected but when i play music i can t hear anything in pc`s speakers. I opened task manager, and i saw that Bluetooth User Suppor Service is stopped and i can t start it. I click start but nothing happends. Please help
1209 views
Dec 15, 2020 at 09:45 PM

Microsoft Storeが 無くなってしまいました。

BoostSpeed11を インストール後 設定 操作してみた所 Storが グレー表示になり アクセス出来なくなりました。
レスキュ-から 回復を試みましたが 復旧出来ない状態です。

1209 views
Oct 23, 2019 at 11:57 PM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1208 views
Apr 27, 2020 at 08:51 AM