Running a scan
When I run a scan to clear disk space it always gets stuck at the same point for 30 - 45 minutes.
Unused application files
C\windows\software distribution\datastore\logs\edbtmp.log
Could you help me resolve pleaase.
werid big files on my D drive
see file.
Idk what is it?
Should I deleat it or keep it?
Проблеммы при использовании виндовс 10
У меня появилось несколько проблем после установки Auslogics BootSpeed, до этого таких проблем никогда небыло.
Перестал обновляться виндовс 10 через центр обновления виндовс, туда захожу, и постоянно только ожидание и ничего не происходит, скрин прикреплю.
Использовал помощник по обновлению виндовс 10 и тоже ошибка и ничего не обновилось, скрин прикреплю.
Еще такой проблемный важный момент.
Мне необходимо активировать оффис от майкрософт, в форму по активации пытаюсь ввести емаил и пароль, и ничего не выходит, ни email, ни пароль, абсолютно никакие буквы и символлы не вводятся с клавиатуры.
Еще есть проблемные моменты следующие.
Раскладка клавиатуры - не всегда срабатывает при нажатии shift+alt приходится делать нажимая мышкой.
Когда хочу посмотреть сети wi-fi которые доступны, (чтобы выбрать свою и ввести логин и пароль), нажимаю на значек сетей, а список сетей не показываются, это происходит не только с открыванием просмотра сетей. Скрин №3. Пустое вылазит и быстро сворачивается.
Еще будьте добры, подскажите как максимально эффективно настроить и использовать Auslogics BootSpeed, или ничего делать не требуется, ПО само качественно обслуживает ПК? на данный момент улучшения не особо видны, а проблемы появились.
Помогите грамотно все настроить, чтобы ПК работал быстро, качественно и без проблем.
Screen Size
Dear Sirs: Your screen is slightly too big for my 19' monitor, so i cannot read to bottom 2 cenbtimeters of the application. Hence thus not being able to resolve the problems in question. Hlow to reduce your sceen size so i can see all of it???.
Chales Waltz
ERROR 80073712
IMPOSIBLE FOR ME REPAIR
PROBLEM DOWLOAD WINDOWS UPDATES.
THANK YOU.
System Booting
определение местоположения
Здравствуйте! После обновления виндоус 10 система безопасности блокирует место положения компьютера.Я даже немогу включить -определять моё местоположение.
Интернет-соединение
Добрый вечер, подскажите пожалуйста как оптимизировать и повысить скорость интернет-соединения через Wi-Fi?
Спасибо
Printer Interference
keep losing saved tabs
graphics card
Postgrest SQL_Службы Microsoft
Вот тут два скрина.
Первый скрин это сама проблема
Второй скрин на что это влияет.
Computer Freeze on Restart and Shutdown
Hello,
Everytime I sleep my computer instead of shutting it down and then go back on later to use it and then shut it down it freezes while loading the shutdown. Same thing when I go to restart it. When I don't sleep it before shutting it down it shut's down/restarts without any issues.
Sometimes it says, "Windows has ran into an error, please wait while we send the error report :)". And at the bottom of this page it says please tell your computer expert (something like that) the following: Memory_Management Error 004. After the this page reaches 100% (for sending error report) it just freezes.
The only way I can shut down my computer when all of the above happens is holding the power button down.
Eli
windows 10 up grade
how can I upgrade my windows 10 desktop from 32 bits to windows 10 64 bits without loosing any datas.
If the internet is cut off around the world
how offline activation future / BOOSTSPEED 12 PRO / key /
no sound, drivers not there
Somewhere in there something uninstalled my "conexant and real hd audio drivers." Sounds simple enough for me to just go download and reinstall, but ive done that several times and they never show up. I have tried manually downloading and installing, and also let HP installer attempt to install the drivers. But they still don't even show up anywhere on my computer, not on C drive, not under "conexant" file (where there is just USB driver).
I have tried doing system restore like 4 times to put the computer back to an earlier date (when my audio still worked), still no drivers show up. Even my computer will say after the attempted restore point process, "failed to restore system."
So my computer has audio via bluetooth, but not through the headphone jack line in or the laptop speakers. I work in audio and video, so this is an issue. I am literally 3 days late in completing my video projects because i get get sound on this laptop... and getting sound via bluetooth won't cut it with the delay and wrong speaker connections.
I have somewhere in the neighborhood of 100+ apps that i've installed on my computer for video and audio, software keys, licensing programs, etc... amongst others. It took me around 2 weeks to install all of those. I do not want to have to do a complete reinstall of windows to get this my computer to work. Can you please help me figure out what I need to do to get this thing fixed? Any help is appreciated!
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
Printer does not print...
After installing your product software, my HP Office Jet Pro 9010 series PCL-3 stopped printing.
Although the printer is wireless connected. The PC sees the printer. HP diagnostics says that the printer is working and connected.
So everything as far as I can observe is connected and working.
When I click the print button in WORD, the printer goes through its process, makes all the clicking sounds and it just stops without printing. I looked at the printer queue and the document loads, then it disappears from the queue and nothing happens.
The printer quiets down and stops dead. Although the printer is connected and on.
By the way, I have a 2 laptops also connected to the printer by WIFI. These laptops do not have your software installed on them. When I print from them, the printer works. So, I know that the printer is working correctly. Besides, it's new!
Thank you... hope you can help...
Al Sosa
FIX: bdservicehost high cpu / memory usage
I have this problem. Can you tell me a solution? https://windowsreport.com/bdservicehost-high-usage/
my hard drive is WDC W10 EZEX
An error occurred while loading Library.dll
When loading Auslogics Disk Defragmenter, I get the following message box:
Auslogics Disk Defrag 9
An error occurred while loading Library.dll.
Error code: 0x0000007E
Error message: The specified module could not be found.
I've tried to uninstall the program, but get the message box:
Runtime error at (180:3568):
Exception 'EAuslogicsIntItException" at address 0049E613
Thanks
Nick
built in Dell Inspiron laptop Realtek microphone
My microphone has stopped working and doesn't seem recognised ny Windows 10. Zoom is displaying a picture rather than video.
ms-resource: ProductName を取り除きたい
Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに
"ms-resource: ProductName" を取り除きたい
このアプリは開かず、アンインストールもできない
Time Lag with using both mouse and keyboard; Slow Computer
At this point, I'm about ready to pull all my hair out. I can't seem to find the cause. The only finding has been:
BIOS and chipset behavior
________________________________________
The highest measured SM BIOS interrupt or other stall was 127 microseconds. This is considered poor behavior. Your system may have difficulty handling multimedia in real-time and may be subject to unexpected stutters and unresponsive behavior.
Ron
Why I am seriously upset
Why woud you duplicate file finder delete the original video file from my computer instead of the empty file with the same name in itunes and leave me with all my videos gone and a bunch of movies I can not use or watch in itunes
That was hours of work for me and now I have nothing left and have to start all over and that was over 100 movies I downloaded
How is that a helpful program a duplicate means duplicate in every way not just in name
wondpws 10 don't boot
My windows 10 home can not boot after a registry cleanup. It was stopped at the laptop logo and not going thro. Later attenpt to boot shows bluescreen with "BAD SYSTEM CONFIG INFO".
I have tried BCD fix, but got "access denied". I tried rewrite config, but my Regback is empty with no backup reg files. Please advise how can I get the thro?
Thank you.
ESENT Help.
svchost (3804, R, 98) SRUJet: An attempt to create the file "C: \ WINDOWS \ system32 \ SRU \ SRUtmp.log" failed with the following system error: 5 (0x00000005): "Access is denied.". File creation will fail with error -1032 (0xfffffbf8).
Bought a TP link Bleutooth usb
Dear Support,
I have bought a TP link UB400 USB and inserted it in the USB port immediatly i had connection.
Then i update the drivers for windows from your package i bought two or 3 days ago and it updated the driver to Bleusolell drivers.
fter nothing seems to work anymore on bluetooth aspects.
Also the CSR software downloaded give me u huge pain because i could almost not removed it anymore.
I need the old driver from windows apperently that is not bluesoleil as this is not responding.
The Bleutooth usnb device i can see in the list of devices but will not react.
Thank you fore th help as suh.
regards Rob.
Notifications
I can not find a way to BLOCK New Auslogics Notifications of upgrades . I have blocked Registry notifications tring to end pop ups of Auslogic Up-grades . IF you can not seem to have FREE upgrades for presently purchased Auslogics 11 , then simply place your up grades into an Auslogics 12 and STOP bugging members with you desiring money for upgrades . Your Subcategory answer question makes NO sense ! This is an Auslogics 11 Programming delima ,none of the subcategory comment shown above have nothing to do with Auslogics 11 , that I know of, as of yet.
I cannot reinstall ScanSnap software
I have had a Fujitsu S1500 ScanSnap scanner on my computer since I got it. Something happened lately (probably a refresh of Win10) and the program, ScanSnap Manager, stopped opening automatically when I turned on the scanner (connected by USB). After trying every remedy I could think of, I uninstalled the ScanSnap software, and cleaned the registry, figuring that I would reinstall the software from the original disk.
But even though I've done everything I know how to do to wipe the computer free of any traces of the original program, as you can see from the attached screen shot, the installer is not letting me install the program as it thinks there's a version already on the computer. There's nothing in installed programs, nor the registry, related to this program. And I force uninstalled it too. At this point I'm unable to use my scanner. Help!
Note that the subcategory of this question is not "Get Help" but your UI won't let me submit a question without choosing something, and the program in question is not in the dropdown list becuase it's already been uninstalled.
Driver power state failure
Driver power state failure , this is not getting ressolved even after updating all drivers of the system. Tried various methods listed on the internet, changed settings many times. Even Auslogic couldn't solve it.
I could not update the Drvers
I have problems on Diver Updater: I could not update my old drivers with the update drivers from you, When I do the mouse pad is not working any more. I have to restore the system. I need your help to update the Drivers.
Drivers
Your driver updater for Wifi 6 AX200 from the driver updater program, cause HUGE throughput issues....
Tests went from 40mbit to 900+mbit (maxing out my connection) when connected to wifi AX.
Thanks
GENERAL QUESTION
what is the difference between Auslogics Disk Defrag Ultimate AND Auslogics Disk Defrag Pro???”
Recommended
DOWNLOAD NOW
Download size: 12,8 Mb