I am not getting full gigabit speed on only my computer.
Hello all, happy holidays!
Unfortunately things aren't so smooth for me right now, I have just installed gigabit internet in my home, but I'm having the problem that my computer is not getting the full speed. I know the modem is putting out 940 average, because I have an eero Pro connected to it and that reads 940, and my dad's laptop on wired connection also reads 900 average, it is only my computer that is not getting the full speed on the same wired connection. It gets on average 250 Mbps, sometimes stooping lower and upload is always the same speed at 40 Mbps up.
I am using a Cat6 cable not 5 ft from the standard xfinity modem, I have reset my network settings and flushed my DNS. I have used DNS Benchmark to make a custom list of the fastest DNS Servers for me. I have downloaded and check my ethernet adapter with Intel PROSET and everything checks out. My adapter has a max speed of 1 Gbps (Intel(R) Ethernet Connection (2) I218-V). I have run virus and malware scans and came out clean. I have tried disabling windows firewall and running only ipv4 or 6. Among other things I have tried A LOT of troubleshooting and my knowledge has limited me at this point
My Gmail account in Windows mail won't send.
Hello, and Merry Christmas. My gmail in windows10 will receive mail, but will no longer send. I've tried deleting and re-installing trhe account several times. Any ideas? I have no problem using the Gmail website, but I like the Windows10 default mail.
I wish you rain, and lots of rain!
George
System Scan
When I am doing a system scan the scanner takes almost 30 minutes or more when it gets to temporary files. Is there something I can do to speed this up?
Не получается запустить.
Доброй ночи.
Полную проверку системы и во время проверки я кое-что сделал, а что не знаю.
Программа не запускается а проблема в том что служба выключена...
(не удалось запустить службу nvidia localsystem container ошибка 14109)
Windows upgrade
Hi
I am using the BoostSpeed11 product prior to an effort to upgrade from Windows 7 to Windows 10.
I have tried before using the product but get the error message 0x8007042B-0x3000D Failure to migrate data on first boot.
I have just cleaned up the zero bytes folders, traces and duplicate files.
There is some thought that antivirus should be stopped while attempting the upgrade. I am presently using Eset internet security.
When performing the migrate data upgrade are all the files carried over? How much should be backed up?
Any hints you can provide will be gold.
In the event that I finally get the upgrade done which of your products should I install, and is it OK to leave the product I have
installed while performing the upgrade?
Eset has logged the driver checker of yours as a pup.What's the go there?
Regards
Petar
BSOD
I have new core i3 4130 with 500gb hard disk and 8 gb ram with all drivers updated but my windows crashes frequently I have scanned the whole pc no virus found then why is this happening?
slow computer.
hello, im valeri i have to ask why is my computer slow? pls send me the answer
i have to thank this program for helping me and i rly would like if this progarm helps me more
thank u -valeri
Transfer of Auslogics boot-speed and main question about my current laptop situation
Greetings Aus Q,
Go ahead and ding me if this is perceived as more than one question.
Currently, I'm using my old laptop with Win 7 and BIOS date October 2009, with 2 GB memory stick added for a total of 4GB. Over a year ago, I bought a Dell Inspirion 15 3000 (3565). Within the warranty period, on the 1803 or 1809 Win 10 update, something happened. Sent back to Dell, and got motherboard replaced and something else. Other issue was my display. Dell said I broke the display and would not fix it.
Money was tight and I could not replace it and went back to my current laptop on Win 7. I spend too much time trying to keep my Win 7 laptop running at a decent clip with the quality Auslogics boot-speed program.
A) I was surprised when I checked Amazon, they have a great price on replacement displays. If I could get a new display, add an extra 4 GB mem stick to give me 8 GB RAM, and research a compatible( or suggestions from you) quality SSD to rplace my HDD for under $200, or buy new laptop with the necessary chit for my sole proprieter business in the $400-600 price range; what would you do?
B) With Win 7 losing support in a month, and all the Win 10 update problems, I was thinking about transitioning to a Linux distro similar to Windows. Make sense from a security issue position?
C) Is it worth looking for a higher end almost new/used laptop on Craigslist or other avenue?
D) Also, my AUS b-s license, can I transfer it to my Dell or to the new pc?.
Thank you,
Jim Copeland
Bluetooth not working
Bluetooth isi not working. Please suggest remedial measures to resolve the issue.
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
Google Drive File Stream Stops Working
How do I prevent BoostSpeed from interfering with Google Drive File Stream? Each time I scan, I lose connection to the Google Drive File Stream and have to uninstall and re-install it.
Несовместимость Auslogic BootSpeed 11 и противовирусных программ:ESET Internet Security версии 12.2, Dr.Web
Установленная у меня лицензионная программа Auslogic BootSpeed 11 постоянно конфликтует с программой ESET Internet Security версии 12.2, а программа Dr.Web Curelt! просто удаляет Auslogic BootSpeed 11, как несущую угрозу компьютеру (вирусная угроза!). Прошу Вас разовбраться в этой проблеме. С уважением, Шишков Руслан Владимирович
Minecraft
modを使ってマイクラを楽しんでプレイしてるんですが、最近forgeを28.1.76から最新のものに変えたら、起動するんですがメニュー画面まで行かなくなりました。
どうすればいいのでしょうか?
いちおう、エラーログを添付しますので教えて下さい。お願いします。
File transfer software
I thought you guys offered a file-transfer system a while ago. Or am I mistaken?
I want to send a 300 MB video to a colleague, but could not find any reference in the main menu to do so.
Computer freezes up
One of the reasons I purchased Ausilogic is to help me with performance. My computer freezes up for 10 seconds or so every few minutes. I don't know if hardware is failing, if there is a miscatch among compenentry.
How can we use your products to solve it.
So far, I haven't been able to eleminate this problem
How can I keep my pc secure
When updates for win 7 stop, how can I keep my computer safe please. I don't want to upgrade. Thanks.
Something happen to this device after i ran internet optimization
I have a 1Gbps connection and before I used to get between 700Mbps to 800Mbps down and 250Mbps up. My last test at speedtest.net was 87.6 Mbps down and and 62.7 Mbps. (Cannot even hit a 100Mbps.) I have the latest drivers and unistalled the device and reinstalled it. Did not run internet optimization after the reinstall and ther results are the same. Auslogics Boostspeed 12 changed something somewhere and I cannot figure out where. I have spent a few days trying to resolve this problem. I really do not want to go back and spend a a couple days reformatting and reinstalling eveything again.
Also just to note at the bottom of the screen where it shows CPU % HDD % Ram % the NET % shows 0 when it used to work before. Even the networking in Taskmanger shows 0% usage even though I have a slow connectionn there is no usage showing.
PC Specs: Attached
Device Manager: Attached
Please Help. I am beyond frustrated at this poing.
Mike
I thought about purchasing a new Network Adapter however I am a retired FF/Medic and live on a tight budget and cannot really afford it and then to discover that did not fix the issue either.
ユーザー制御
デスクトップのショートカットから、ブーストスピード開きません。タスクバーからなら開くのに。ユーザー制御ウィンドが出てダメです。ドライバーアップデーターのショートカットも同じです。また、時々ですが、ブーストスピードが開いた時に、すべての画面が白紙画面になります。
アカウントとかセキュリティーの調整をしてみたのですが変わりません。インストールしなおしても変わりません。セキュリティソフトが干渉でもしているのでしょうか?何か良い方法はないでしょうか、お願いします。
problem after running resolve all issues early this morning
Eliminate Devices to be scanned by the software.
When I do a maitenance scan I keep having to have problems with my Camera and microphone issues.
I have to avoid doing this be cause it creates problems and have to reinsatll my device.
I think others could have the same problem, it could be best, to have your software avoid touching devices alltogether.
cannot open links in OUTLOOK
Looking to solve that problem with all kind proposals I found on internet doesn't give satisfaction.
(also copying registerkeys from a anotrher computer succeeding to open that kind of links doesn't give the solution)
( all options of the Outlook-program are set as they are on the good-working PC. Also that wasn't giving a solution)
Both PC have Bitdefender Total Protectionb als Virusprotection, so this cannot be the origin of the problem.
Please can you help me : I'm searching to find a solution for more than a full year...
File in attachment : extension .reg was changer in .txt to permit the file to be sended.
Thanks on beforehand !
Jaak Valembois
Thumbnail files disappear
Because I waste much time to open and preview the photos and video thumbnail in Windows Explorer.
And how can I prevent the BoostSpeed delete my thumbnail cache files in my Windows 10 in the future?
Thank you very much!
WiFi keeps disconnecting
Up to date Windows 10, Firefox & Norton 360. Was doing the same thing when I used AVAST.
key product W10PRO missed
Hi, I have AuslogicsBoostSpeed 11 licensed on 3 computers. 2 computers, the oldest, have windows 8.1 PRO. Newer computers have Windows 10 PRO. In the SOFTWARE-SYSTEM INFORMATION-OPERATING SYSTEM section the product key normally appears while on the PC with W10PRO the alphanumeric character string of the product key is covered with the capital B letters. I wanted to know why the code is hidden before it appeared. Thanks for the reply. Alex
pc unplugged ac adapter pc shuts down with battery charged at high percentage
Keyboard issues.
I've just updated to windows 10 May update, have now completely lost functionality of shift keys.
Delete"pagefile.sys"
Please edit a BAT file to clean up the C disk for me.
My Email"
I wanna delete"pagefile.sys"
Démarrage anormal
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
registry cleaner
tried to use it but received message it has to be reinstalled. I need instuctions how to install.
Window.old folder
The PC had Update to 2004 Versione, now has the PC ond big 30GB Windows.old folder. why can i the folder delete
windows product
windows product ID for win 10 Pro is erroneous number as reported in system information
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it
Malwarebytes Shuts Down Auslogics BoastSpeed11 and Quaranteens it. I have to shut down Malwarebytes and then reinstall Auslogics BoastSpeed11. Then during reinstallation I get a number of errors but the Auslogics BoastSpeed11 does reinstall but this can not be good for the stability of the system. What to do ?
My Windows 10 Pro version asks for activation
I wonder why my Windows 10 Pro version, upgraded from Windows 8.1, asks for activation(---> go to settings ) since 2 weeks.
The notice pops up everytime I strart the laptop.
I have read that the OS might become unstable if not"activated"..
When checking, Windows is activated, and the key seems to be valid, but with a digital license "provided by "Your Organization""
Is there a way around it, without wiping the drive and install "new "Windows 10 Pro ? I did make a back up copy with Auslogics Bitreplica on a WD drive though..
Thank you for any answer that may show a solution.
Many regards,
Robert Soer
<robertsoer@gmail.com>