1859 questions

After Auslogics did some repairs, alot doesnt work

I really cant type out the problems im having all because there are so many... I just got a Performace Scan message from Auglogics as I am typing this message stating "its been 6 days since your last scan" but im afraid to run anything on auglogics. I need a Tech that knows computers very well to remote connect to my laptop and see if they can fix some if not all of these problems that came about. I will list some of the problems I am encountering but first I want to say that everthing did work before. I used to be a windows insider but now my diagnostic data is set to basic and i cant chage it to full.. In yellow, at the top of the windows settings page it now says that I do not have authorization or this setting is being controlled by your organizer. I dont have an Organizer. Ive never seen that Yellow Font orginazation control lock or what ever it is, ever before until about a week ago when i ran the last scan with auglogics. Its not just on that Diagnostic sending part, I find that I get that controlled by my orginazation lock out on all kinds of settings and controls. I work as a heavy equipment machinery driver and work doesnt even have comptures, im not in school or connected to any school account.. I bought my own brand new laptop about 3 months ago, its connected on my home network Optimum Internet and my outlook account isnt attached to anything but my Xbox One X and like i said it was never there before... I cant type in any Windows app or the task bar without having to hit the windows key + R and enter C:\Windows\System32\ctfmon.exe and then it works, but needs to be done everytime i turn my laptop on... I used to always have my Samsung Fit 64 gig tiny flat USB and my SDXC 64 gig 170Mbps read/write card set to enable read and write and catch. Not Readyboost.. but now i cant do that. both USB and SDXC are all over the place.. I have gigabyte speed from optimum and yet my whole computer runs slow... I cant type in the search bar and get my apps show up, or update, or power plan. nothing... AND for some reason, Ive NEVER had 4 accounts. when i turn my laptop on i can only log into my account like normal. but then when you look at the account users, theres administrator, then there is like 3 accounts of my name.. i dont know what to do

1433 views
May 06, 2020 at 04:31 PM

defrag ssd

you product wants to defrag and tweak my ssd is this safe?

1225 views
May 06, 2020 at 09:29 AM

Запуск Виндовс

Доброго времени суток. После пользования вашим продуктом у меня стало чтото не то с загрузкой виндовс. Сначала все идет нормально. Загрузка биоса. Потом заставка загрузки виндовс. Потом у меня экран отключается и в таком состоянии минут 15. Экран от ПК не получает никаких сигналов. Как мне это отключить? Что бы была нормальная загрузка рабочего стола после заставки загрузки виндовс? Это началось сразу же после использование Ауслоджик Буст Спида. Откат системы я сделать не могу.

1433 views
May 06, 2020 at 05:50 AM

Démarrage anormal

Bonjour,
J'utilise une unité ASUS N73SV sous Windows10 qui me donne entière satisfaction.
Logiciel de sécurité Kaspersky, Firewall Windows, Analyses périodiques par Auslogics Anti-Malware.
Aucune attaque virale jusqu'à aujourd'hui.
Depuis un an environ la touche habituelle de demarrage - au dessus du clavier à droite - ne fonctionne plus; le pc ne demarre pas.
Pour demarrer le pc, il faut appuyer sur la touchei se trouve tout au dessus du clavier à gauche, donc la symetrique de l'autre.
Mais au lieu d'activer directement Windows, cela active le Bios (son de boot tres fort) puis Windows (son de boot normal).
J'ai entrepris plusieurs fois de comprendre et réparer mais sans succès.
Je souhaite revenir à un fonctionnement normal.
Merci de votre aide.
Kind regards,
Jean Farny
1178 views
May 03, 2020 at 04:35 PM

Auslogics registry cleaner

Can certain categories be excluded when using registry cleaner?
REASON: after using registry cleaner I get an error message when I open MSMoney. I can correct this using Money setup, but registry cleaner does something to reverse my setup correction.

System: Windows 7 Home Premium

1385 views
Apr 29, 2020 at 10:41 PM

Отвалился BlueTooth

Добрый день
на обоих моих ноутбука пропал блутус. Возможно что то позволил исправить программе не проконтролировав. Как включить блютус снова? В скрытых девайсай его вижу. Система предлагаетпереустановить драйвер, но дело явно не в этом.

1460 views
Apr 29, 2020 at 06:00 AM

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

Здравствуйте, программа Auslogics не запускается вместе с включением компьютера, как исправить?

1265 views
Apr 29, 2020 at 01:50 AM

Disco duro se encuentra al 100%

Hola, ultimamente he notado que mi disco duro se encuentra al 100% y las aplicaciones se abren lento, cuando tenia windows 7 no me pasaba esto supongo que es por el sistema operativo tengo windows 10 pro, ¿habra una solucion para bajar el uso del disco ?

1268 views
Apr 28, 2020 at 02:59 AM

POST interruption

What could be the problem when most of the time during Boot on Message "Warning System Boot fail or post interruption".

Press continue or press del to load bios setup.

1209 views
Apr 27, 2020 at 08:51 AM

Why auslogics boostspeed can't solve this ?

Hello. I'm a regular gamer, but when I play a game, no matter which one, my computer always crashes. Everyday, for months. I have used boostspeed 11 many times to fix this, but despite what Auslogics promised, my computer is no more stable than before. Nothing has changed. So I’m wondering what it pays to pay for software that promises to take care of our computer’s system, if it’s just basic operations that don’t solve anything. If nothing changes, I will not renew my subscription. If you need information about my hardware, don't hesitate to ask me. Thank you. Sincerely, Arnaud

1289 views
Apr 27, 2020 at 08:32 AM

Malware

How can I minimize the picking up of malware by using your toolkit?

1711 views
Apr 25, 2020 at 10:50 PM

Temperature

I am using Windows 8.1. Is there a provision in BoostSpeed 11, for setting the Disk/Processor Temperature at which the PC will switch off?

1409 views
Apr 22, 2020 at 04:00 PM

ms-resource: ProductName を取り除きたい

Windows10 バージョン 2004 (OSビルド 19041.207)
スタートメニューのその他グループに

"ms-resource: ProductName"  を取り除きたい


このアプリは開かず、アンインストールもできない

2877 views
Apr 22, 2020 at 01:56 PM

sudden shutdown

why is my pc suddenly shuts down without warning every 10 to 20 minutes

1332 views
Apr 20, 2020 at 08:19 AM

OpenAL32.dll.

Пожалуйста посоветуйте файл OpenAL32.dll. последствия

1663 views
Apr 19, 2020 at 06:26 AM

Windows 10 logon password via Auslogics

Hello!
I am not new to Aulogics - great product! However, I am a new Aulogics 11 user. In Aulogics, in trying to bypass Windows 10 Logon on my Lenovo, I believe the password that was pre-autofilled may have been incorrect? I chose by-pass Windows logon, however when my laptop restarts the first User screen tells me my Password is incorrect. How do I fix this in Aulogics? Any help would be appreciated! ~Catherine Trager

Content hidden to protect privacy

1514 views
Apr 18, 2020 at 05:41 PM

Повышенное потребление ресурсов

Периодически всплывает уведомление о повышенном потреблении ресурсов. По клику открывается Task Manager, из информации в котором я понимаю только, что процессор загружен на 100%, оперативная память тоже. Я и сам замечаю, что компьютер часто тормозит и процессор нагревается до 50 градусов.
Компьютер новый (моноблок Lenovo, W10), программ в автозагрузке не более десяти. Прежний моноблок, которому более пяти лет с W 8.1, на котором установлено гораздо больше программ, ведёт себя гораздо резвее.
И что со всем этим делать? В Task Manager не вижу каких-либо инструментов. Уж не сама ли ваша программа Auslogics Boost Speed 11 тормозит систему?

1011 views
Apr 18, 2020 at 05:17 PM

Кэш второго уровня

Здравствуйте, в прошлых версиях была возможность через Tweak Manager включить исплользование кэша втрого уровня. В 11 версии неполучается найти данную функцию. Подскажите как это сделать.

1423 views
Apr 18, 2020 at 10:31 AM

System Restore

Desktop just started on off when sitting in sleep mode, A tried to update Microsoft Windows 10, took update, Still on off multi. times daily B, tried System restore tells me could not preform System Restore Still on ,off mode , C What setting in resuce center would fix this System Restore problem.s all from same date around System 3 or 4 from same date close to restore point date. Is Boostspeed 11 causing this problem

1412 views
Apr 16, 2020 at 06:59 PM

help needed

Hi, I don't think it's about you, but if you can help me I'll be very grateful.
i have two devices
1.micro sd 16GB apacer
2.flash memory 16GB apacer
these two device now is WRITE PROTECTED and i have download every tools and tricks exist in world for flash these but no one responding.
now pls pls pls pls pls pls help me in my country there is no official represent from apacer or others pls help me tnx a lot and i very respect u and ur works and apps

respectful.TOOFAN

1351 views
Apr 16, 2020 at 08:42 AM

Windows Search Repeatedly Becoming Disabled

I am running Windows 10. The Windows Search service repeatedly becomes disabled, and I suspect that the cause is something within the Auslogics BoostSpeed 12 program. I am able to restart it by entering services in the search bar, choosing Automatic (or Manual) and then restarting the service. However, is there a toggle within your program that would previent this recurring issue?

Clifford Sweet
San Diego, California
1147 views
Oct 18, 2021 at 11:04 AM

DPI

What is normal DPI

1147 views
Oct 25, 2019 at 04:25 PM

cannot restore

how can I restore my mobile hotspot?

1147 views
May 25, 2020 at 02:09 PM

Location Service

Hi,

I want to turn on Location services so that my display automatically dims and cuts out blue light when the sun sets. However when I go to 'Night Light Settings' and then under 'Schedule' access 'Location Settings' I am informed that "Some of these settings are hidden or managed by your organisation" and the 'Change' button is disabled.

What Organisation? This is my personal desktop not managed by anyone but me.

Pleas could you help with this issue.

Thanks
Jeff
1146 views
Jan 05, 2021 at 05:13 PM

keep losing saved tabs

Hi. For both Microsoft Edge and Google browsers whenever I run Boostspeed after that the tabs i spent hours setting up all disappera and its like the first time running the browser. That used to happen with Firefox browser but not anymore and I have no idea why that one works ok. Is there a way to set up Boostspeed so it NEVER deletes exsiting tabs. I run multiple businesses and have tabs for all suppliers opened and easy to access. I like Auslogics products but why are they set by default to wipe our existing saved tabs and how do I prevent that? Version of browser does not seem to matter. Is there a way I can save tab structure on a browser in case this happens and recover it? Thanks - Brad Fry
1146 views
Apr 02, 2021 at 06:15 PM

Printer Interference

My printer is connected via USB (previously by network). Each time I run a scan and fix with Auslogics Boostspeed 12, I have reinstall the printer drivers from the ground up. Why is this? Is there a feature that I should not run to avoid this? Please advise.
1146 views
Apr 07, 2021 at 05:09 PM

Windows Search Engine

How do i enable the Windows Search Engine?
1145 views
Jan 09, 2021 at 06:46 PM

A Game Application

I keep getting an error code that says 0xC0000005 (0x0) N whenever i try and boot up the application and I'm not sure what it means or how to fix it. It tells me to scan and repair the application but that won't work either. I tried placing the file but it wouldn't let me.
1145 views
Nov 13, 2020 at 05:23 AM

Cannot activate

I HAVE PAID FOR on 1/20/22, AND DOWNLOADED BOOST SPEED 12.2.0.0. AND REGISTERED WITH THE SUPPLIED KEY.
WHEN I TRY TO USE THIS VERSION, IT STATES I HAVE ONLY THE FREE VERSION, AND WHEN I TRY TO USE THE PRO VERSION THE WEBSITE WANTS ME TO PAY FOR IT AGAIN,BUT SAYS IT IS REGISTERED ALL OK
FOR EXAMPLE WHEN I TRY TO DEFRAG, IT ONLY DEFRAGS, I CAN NO LONGER DEFRAG AND OPTIMSE MY DISCS AS BEFORE
THIS IS REALLY FRUSTRATING AS I HAVE BEEN A LONG TIME SUBSCRIBER
PLEASE HELP.
1145 views
Jan 27, 2022 at 04:53 PM

A little advice before running this feature

I am not having any windows 10 problems but am a little concerned about your optimization feature to remove outdated windows files. In my case there are 43.16 GB or 28,000 items indicated that could be cleared. The warning is that after this some files may have to be downloaded from Microsoft. Is this amount of files typical. My system has had Windows 7 on up so maybe this would help but there are so many of these files I dont want to crash my system. Any tips or advice on this would be appreciated

Mark
1144 views
Oct 27, 2020 at 03:49 AM

IMEがスキャン後停止する。

Windows10のinsider Programに参加しています。 Boostspeed10を1年半ほど使っており、Win10 build188xxごろまでは問題がありませんでした。ところがそれ以降のビルドから、IMEが無効になるようになり、Windows のバグかと思っていました。
ところが、ふと思いついてBoostSpeedのスキャンで削除したファイルを戻すと、IMEが復活しました。 Windowsのアップデートの際にBoostspeedとバッティングするような変更があったのかもしれないと思っています。

今、Boostspeed11を使っており、システムにかかわる項目を大幅に外して使っています。
いつも使うのは クリーンアップと保護です。
トラブルはIMEだけですので、IMEにかかわる項目だけ外してスキャンしたいとおもいます。
クリーアップ・保護の項目で外すべきものをお教えください。

1143 views
Dec 04, 2019 at 12:32 PM

How can I keep my pc secure

When updates for win 7 stop, how can I keep my computer safe please. I don't want to upgrade. Thanks.

1142 views
Dec 09, 2019 at 03:34 AM

Загрузка с SSD

Добрый день!
Кое как удалось установить windows 10 на SSD. но при первой же перезагрузке с него не загрузиться никак.
В меню загрузок F9 есть выбор ситем вин 8,1 том1, вин 8,1 том 6 и вин 10, но при выборе вин10 произходит перезагрузка и все заново. В биосе P8Z77-V LX2 (ver. 2501) этот SSD(GPT,NTFS) не виден.
Прошу о помощи!
1141 views
Jul 13, 2020 at 12:15 PM

system windows 8?

How do I change what system it shows? I have always had windows 10 on this computer.

1140 views
Jul 31, 2020 at 05:16 PM

Start Up Error

Every time I start up my laptop I get an Error Message:

RunDLL

There was a problem starting xrWCbgnd.dll

The specified module could not be found.

1140 views
May 11, 2020 at 06:03 PM

раздел в Windows 10

не могу настоить диагностические данные и отзывы

1140 views
May 12, 2020 at 08:43 AM

integrator.exe грузит процессор

Процесс integrator.exe грузит процессор постоянно, как это исправить?

1139 views
Dec 31, 2020 at 07:13 PM

acsses denied in changing windows services

hey!
i want to install an app update from windows store but i recieve an 0*80070422 and as i searched it heads to a disibled windows update service in windows services panel and i wanted to turn it on and change its status from desibled to automatic but it keeps accsess deniding what should i do plese step by step and im sure about my administrator acssess
1137 views
Dec 21, 2020 at 11:08 AM

Aktivation not Possibel

Hi

I did try to activate the pro version.
Reslult: The product has been activated

But in realatiy is the green botten still here and its not working as should when activated.

Regards
Kurt
1137 views
Jan 25, 2022 at 11:00 AM